Company: Contact:
Job Name:
Mark #: Email Address:
TRUDOOR, LLC 4737 N. 43RD AVE #6 70, PHOENIX, AZ 85031 550 Albion Ave Suite Schaumburg, IL 60193 P: (623) 748-9122 F: (623) 547-7052
[email protected]
Phone Number: Fax Number:
Replacement Door Worksheet DOOR TYPE:
A
HOLLOW METAL, 18 GA.
SOLID CORE WOOD (VENEER:
OTHER:
C
A. ACTUAL DOOR WIDTH ( e.g. 35•3/4") G
D
Measure from
the inside of the frame head, to the top of each hinge cutout
)
B. ACTUAL DOOR HEIGHT (e.g. 83 1/8”)
C. TOP EDGE OF DOOR TO HINGE CUTOUT #1
F
D. TOP EDGE OF DOOR TO HINGE CUTOUT # 2 E. TOP EDGE OF DOOR TO HINGE CUTOUT # 3
F.
E
H
G.
Write 4th hinge dimension in the notes/additional info box.
FIRE RATING: 5” X 20”
the center-line of the strike or
FULL GLASS
lock cutout
LOUVER SIZE:
Typical Undercut: 3/4” or 5/8”
RIGHT HAND
RHR
OUTSIDE (KEYSIDE)
RIGHT HAND REVERSE
LH
HARDWARE:
LHR
OUTSIDE (KEYSIDE)
LEFT HAND REVERSE
The hand of a door is always determined from the outside.
4” X 25”
OTHER:
NONE
60
NONE
PUSH/PULL SET
THRESHOLD
DRIP CAP
J
US3
)
)
)
DEADBOLT
LATCH GUARD
WEATHERSTRIP
US10
US26D
US10B
NOTES / ADDITIONAL INFO:
12” X 24”
OTHER:
WALL/FLOOR STOP
HARDWARE FINISH:
3 HR
10” X 10”
12” X 12”
HINGES (TYPE:
PANIC BAR (TRIM:
90
22” X 28” HALF GLASS
LOCKSET (FUNCTION:
I
OUTSIDE (KEYSIDE)
LH - LEFT HAND
45
FULL LOUVER
24” X 24“
K
OUTSIDE (KEYSIDE)
20
LITE KIT (EXPOSED GLASS):
Measure from the inside of the frame head, to
RH
TOP EDGE OF DOOR TO C/L OF DEADBOLT PREP
H. LOCK BACKSET (e.g. 2 3/4” or 2 3/8”) I. DOOR THICKNESS (e.g. 1 3/4” or 1 3/8”) J. HINGE HEIGHT (e.g. 4 1/2”) K. DOOR HAND
B
Note: 8’0” doors have a 4th hinge (not shown on drawing).
TOP EDGE OF DOOR TO C/L OF DOOR LOCK PREP
DOOR CLOSER
KICKPLATE
DOOR SWEEP
DOOR VIEWER
US32D
OTHER:
US4
© Trudoor, LLC | 10/2014
