PRODUCT SHEET
Proportioning Devices
30
Material (Body)
Aluminium, bronze or brass
Standard Mixing Ratio
3% (others available on request)
Finish
Natural
Connection Types
Standard: BSP thread Optional: UNI-45, UNI-70, STORZ, BSS, NH or UNI / DIN, ANSI - ASA flanges
Max. Suction Level
1.5 m
Options
• Quick selection adjuster of mixing ratios: 0%, 3%, 6% • Pick-up tube with internal spiral steel reinforcement • UNI-25 quick connection & rigid PVC terminal • Hard annodised finish
Weight
See table
80
60
UNI 25
ES-8AL / BZ
60
G2
185
95
110
Ø13
G4
G4
4" BSP
ES-10 - ES-45
4" BSP
UNI 25
80
2” BSP
340
G2
51
Ø9
2” BSP
UNI 25
G2
G2 2" BSP
ES-2OT & ES-4OT
2" BSP
In-Line Eductors | ES In-Line Foam Mixer / Eductor
65 L
340
Part number ES-2/OT ES-4/OT ES-8/AL ES-8/BZ ES-10 ES-16 ES-20 ES-24 ES-30 ES-40 ES-45
Body material Brass Brass Aluminium Bronze Bronze Bronze Bronze Bronze Bronze Bronze Bronze
Flow rate (l/min. - 7 bar) 225 450 800 800 1,000 1,600 2,000 2,400 3,000 4,000 4,500
Working pressure (bar) 4 - 12 4 - 12 4 - 12 4 - 12 4 - 12 4 - 12 4 - 12 4 - 12 4 - 12 4 - 12 4 - 12
Pressure loss (@7 bar) (%) 29 29 29 29 30 29 28 27 30 31 31
SP2.3.2.1/0417/en
Warning - Eductor inlet pressure and flow must be advised at order stage. If different to standard specification shown in this table, additional cost will apply. Warning - the working pressure is fixed. The fixed pressure can be selected in the range of 4 - 12 bar. Eductor performance is optimised at higher pressures.
Note: This document contains basic product information only. Information, photos and drawings are not contractually binding. In all cases, the manufacturer’s full technical documentation remains the reference document. The contents of this publication are subject to modifications without notice. All rights reserved.
© K.C. Antincendi S.r.l. | Via Pavia 76 | 27042 Bressana Bottarone (PV) | Italy |
[email protected]
150
50
Weight (kg) 4.0 4.0 4.0 4.0 9.5 9.5 10.0 10.0 10.0 10.0 10.0