Polarity and Intermolecular Forces
Say Thanks to the Authors Click http://www.ck12.org/saythanks (No sign in required)
To access a customizable version of this book, as well as other interactive content, visit www.ck12.org
CK-12 Foundation is a non-profit organization with a mission to reduce the cost of textbook materials for the K-12 market both in the U.S. and worldwide. Using an open-content, web-based collaborative model termed the FlexBook®, CK-12 intends to pioneer the generation and distribution of high-quality educational content that will serve both as core text as well as provide an adaptive environment for learning, powered through the FlexBook Platform®. Copyright © 2014 CK-12 Foundation, www.ck12.org The names “CK-12” and “CK12” and associated logos and the terms “FlexBook®” and “FlexBook Platform®” (collectively “CK-12 Marks”) are trademarks and service marks of CK-12 Foundation and are protected by federal, state, and international laws. Any form of reproduction of this book in any format or medium, in whole or in sections must include the referral attribution link http://www.ck12.org/saythanks (placed in a visible location) in addition to the following terms. Except as otherwise noted, all CK-12 Content (including CK-12 Curriculum Material) is made available to Users in accordance with the Creative Commons Attribution-Non-Commercial 3.0 Unported (CC BY-NC 3.0) License (http://creativecommons.org/ licenses/by-nc/3.0/), as amended and updated by Creative Commons from time to time (the “CC License”), which is incorporated herein by this reference. Complete terms can be found at http://www.ck12.org/terms. Printed: January 9, 2014
www.ck12.org
C ONCEPT
Concept 1. Polarity and Intermolecular Forces
1
Polarity and Intermolecular Forces
Lesson Objectives • Describe how the electronegativity difference between two atoms in a covalent bond results in the formation of a nonpolar covalent, polar covalent, or ionic bond. • Describe how molecular geometry plays a role in determining whether a molecule is polar or nonpolar. • Distinguish between the following three types of intermolecular forces: dipole-dipole forces, London dispersion forces, and hydrogen bonds. • Describe how chemical bonding and intermolecular forces influence the properties of various compounds.
Lesson Vocabulary • • • • • • • • • •
diatomic element dipole dipole-dipole forces hydrogen bond intermolecular forces London dispersion forces nonpolar covalent bond polar covalent bond polar molecule van der Waals forces
Check Your Understanding Recalling Prior Knowledge
• How do electrons behave during the formation of an ionic bond, and what properties of ionic compounds result from the bonding? • What is meant by the electronegativity of an element?
In an ionic bond, one or more electrons are transferred from one atom to another. In a covalent bond, one or more pairs of electrons are shared between atoms. However, bonding between atoms of different elements is rarely purely ionic or purely covalent. The true nature of a chemical bond often falls somewhere in between these two extremes. 1
www.ck12.org
Bond Polarity Recall from the earlier chapter, The Periodic Table, that electronegativity is defined as the relative ability of an atom to attract electrons when present in a compound. The electronegativities of most elements are shown below (Figure 1.1).
FIGURE 1.1 Electronegativities of the elements.
The degree to which a given bond is ionic or covalent is determined by calculating the difference in electronegativity between the two atoms involved in the bond. As an example, consider the bond that occurs between an atom of potassium and an atom of fluorine. Using the table, the difference in electronegativity is 4.0 –0.8 = 3.2. Because the difference in electronegativity is relatively large, the bond between the two atoms is primarily ionic. Since the fluorine atom has a much larger attraction for electrons than the potassium atom does, the valence electron from the potassium atom is considered to have completely transferred to the fluorine atom. The figure below (Figure 1.2) shows how the difference in electronegativity relates to the ionic or covalent character of a chemical bond. According to the figure above (Figure 1.2), a difference in electronegativity (∆EN) greater than 1.7 results in a bond that is mostly ionic in character. Nonpolar Covalent Bonds
A bond in which the electronegativity difference is less than 1.7 is considered to be mostly covalent in character. However, a distinction is often made between two general types of covalent bonds. A nonpolar covalent bond is a covalent bond in which the bonding electrons are shared equally between the two atoms. In a nonpolar covalent bond, the distribution of electrical charge is balanced between the two atoms (Figure 1.3). 2
www.ck12.org
Concept 1. Polarity and Intermolecular Forces
FIGURE 1.2 The difference in electronegativity between the two elements involved in a chemical bond is predictive of the type of bond made by those two atoms. A small difference (<0.4) results in a nonpolar covalent bond, an intermediate difference (0.4-1.7) results in a polar covalent bond, and a large difference (>1.7) results in an ionic bond.
FIGURE 1.3 A nonpolar covalent bond is one in which the shared electrons are distributed equally between the two atoms.
The two chlorine atoms share the pair of electrons in the single covalent bond equally, and the electron density surrounding the Cl2 molecule is symmetrical. Any diatomic molecule in which the two atoms are the same element must be joined by a nonpolar covalent bond. There are seven diatomic elements, which are elements whose natural form is of a diatomic molecule. They are hydrogen (H2 ), nitrogen (N2 ), oxygen (O2 ), fluorine (F2 ), chlorine (Cl2 ), bromine (Br2 ), and iodine (I2 ). By forming a diatomic molecule, both atoms in each of these molecules satisfy the octet rule, resulting in a structure that is much more stable than the isolated atoms. Notice from the figure above (Figure 1.2) that molecules in which the electronegativity difference is very small (<0.4) are also considered nonpolar covalent. An example would be a bond between chlorine and bromine (∆EN = 3.16 –2.96 = 0.20). An animation of a nonpolar covalent bond formation can be found at http://www.dlt.ncssm.edu/core/Chapter9-Bondi ng_and_Geometry/Chapter9-Animations/CovalentBonding.html. 3
www.ck12.org Polar Covalent Bonds
A bond in which the electronegativity difference between the atoms is between 0.4 and 1.7 is called a polar covalent bond. A polar covalent bond is a covalent bond in which the atoms have an unequal attraction for electrons, so the sharing is unequal. In a polar covalent bond, sometimes simply called a polar bond, the distribution of shared electrons within the molecule is no longer symmetrical (Figure 1.4).
FIGURE 1.4 In the polar covalent bond of HF, the electron density is unevenly distributed. There is a higher density (red) near the fluorine atom, and a lower density (blue) near the hydrogen atom.
The hydrogen fluoride molecule has an electronegativity difference of 1.9, which places it in the category of being slightly ionic. However, the hydrogen ion (H+ ) is so very small that it is not capable of adopting the crystal lattice structure of an ionic compound. Hydrogen fluoride is a highly polar molecule. Because of its greater electronegativity, the electron density around the fluorine atom is much higher than the electron density around the hydrogen atom. An easy way to illustrate the uneven electron distribution in a polar covalent bond is to use the Greek letter, delta (δ) along with a positive or negative sign to indicate that an atom has a partial positive or negative charge.
The atom with the greater electronegativity acquires a partial negative charge, while the atom with the lesser electronegativity acquires a partial positive charge. The delta symbol is used to indicate that the quantity of charge is less than one. A crossed arrow can also be used to indicate the direction of greater electron density.
Sample Problem 9.3: Identifying Bond Types Which type of bond will form between each of the following pairs of atoms? a. C and O b. Na and N c. B and H 4
www.ck12.org
Concept 1. Polarity and Intermolecular Forces
Step 1: List the known quantities and plan the problem. Known Using the electronegativity chart: a. C = 2.5, O = 3.5 b. Na = 0.9, N = 3.0 c. B = 2.0, H = 2.1 Step 2: Solve. Calculate the difference and use the diagram above (Figure above) to identify the bond type. a. 3.5 –2.5 = 1.0 → C-O bond is polar covalent b. 3.0 –0.9 = 2.1 → Na-N bond is ionic c. 2.1 –2.0 = 0.1 → B-H bond is nonpolar covalent Step 3: Think about your result. Bonds between nonmetal atoms are generally covalent in nature (A and C), while bonds between a metal atom and a nonmetal atom are generally ionic.
Practice Problems 1. Place the following bonds in order from least polar to most polar. a. b. c. d.
Fe-N H-Cl Ca-O C-S
Watch a video demonstrating the intermolecular forces of water and carbon dioxide at http://www.youtube.com/w atch?v=rCbtapphNwA&feature=player_embedded.
Molecular Polarity A polar molecule is a molecule in which one end of the molecule is slightly positive, while the other end is slightly negative. A diatomic molecule that consists of a polar covalent bond, such as HF, is a polar molecule. The two electrically charged regions on either end of the molecule are called poles, similar to a magnet having a north and a south pole. A molecule with two poles is called a dipole. Hydrogen fluoride is a dipole. A simplified way to depict polar molecules is pictured below (Figure 1.5). When placed between oppositely charged plates, polar molecules orient themselves so that their positive ends are closer to the negative plate and their negative ends are closer to the positive plate (Figure 1.6). Experimental techniques involving electric fields can be used to determine if a certain substance is composed of polar molecules and to measure the degree of polarity. For molecules with more than two atoms, the molecular geometry must also be taken into account when determining if the molecule is polar or nonpolar. Pictured below (Figure 1.7) is a comparison between carbon dioxide and water. 5
www.ck12.org
FIGURE 1.5 A molecular dipole results from the unequal distribution of electron density throughout a molecule.
FIGURE 1.6 Polar molecules are randomly oriented in the absence of an applied electric field (top). In an electric field, the molecules orient themselves to maximize the attraction between opposite charges (bottom).
Carbon dioxide (CO2 ) is a linear molecule. The oxygen atoms are more electronegative than the carbon atom, so there are two individual dipoles pointing outward from the C atom to each O atom. However, since the dipoles are of equal strength and are oriented in this way, they cancel each other out, and the overall molecular polarity of CO2 is zero. Water is a bent molecule because of the two lone pairs on the central oxygen atom. The individual dipoles point from the H atoms toward the O atom. Because of the shape, the dipoles do not cancel each other out, and the water molecule is polar. In the figure, the net dipole is shown in blue and points upward. FIGURE 1.7 The molecular geometry of a molecule affects its polarity. In CO2 , the two polar bonds cancel each other out, and the result is a nonpolar molecule. Water is polar because its bent shape means that the two polar bonds do not cancel.
Some other molecules are shown below (Figure 1.8). Notice that a tetrahedral molecule such as CH4 is nonpolar. However, if one of the peripheral H atoms is replaced by another atom that has a different electronegativity, the 6
www.ck12.org
Concept 1. Polarity and Intermolecular Forces
molecule becomes polar. A trigonal planar molecule (BF3 ) may be nonpolar if all three peripheral atoms are the same, but a trigonal pyramidal molecule (NH3 ) is polar.
FIGURE 1.8 Some examples of polar and nonpolar molecules with various molecular geometries.
Intermolecular Forces Covalent and ionic bonds can be called intramolecular forces: forces that act within a molecule or crystal. Molecules also attract other molecules. Intermolecular forces are attractions that occur between molecules. Intermolecular forces are weaker than either ionic or covalent bonds. However, the varying strengths of different types of intermolecular forces are responsible for physical properties of molecular compounds such as melting and boiling points. Van der Waals Forces
The first type of intermolecular force we will consider are called van der Waals forces, after Dutch chemist, Johannes van der Waals (1837-1923). Van der Waals forces are the weakest intermolecular force and consist of dipole-dipole forces and dispersion forces. Dipole-Dipole Forces
Dipole-dipole forces are the attractive forces that occur between polar molecules (Figure 1.9). A molecule of hydrogen chloride has a partially positive hydrogen atom and a partially negative chlorine atom. A collection of many hydrogen chloride molecules will align themselves so that the oppositely charged regions of neighboring molecules are near each other. London Dispersion Forces
Dispersion forces are also considered a type of van der Waals force and are the weakest of all intermolecular forces. They are often called London forces after Fritz London (1900-1954), who first proposed their existence in 1930. 7
www.ck12.org
FIGURE 1.9 Dipole-dipole forces result from the attraction between the positive end of one dipole and the negative end of a neighboring dipole. Dipole-dipole forces are similar to ionic bonds, but because they involve only partial charges, they are much weaker.
London dispersion forces are intermolecular forces that occur between all atoms and molecules due to the random motion of electrons. For example, the electron cloud of a helium atom contains two electrons, and, when averaged over time, these electrons will distribute themselves evenly around the nucleus. However, at any given moment, the electron distribution may be uneven, resulting in an instantaneous dipole. This weak and temporary dipole can subsequently influence neighboring helium atoms through electrostatic attraction and repulsion. The formation of an induced dipole is illustrated below (Figure 1.10).
FIGURE 1.10 Random fluctuations in the electron density within the electron cloud of a helium atom results in a short-lived ("instantaneous") dipole. The attractive force between instantaneous dipoles and the resulting induced dipoles in neighboring molecules is called the London dispersion force.
The instantaneous and induced dipoles are weakly attracted to one another. The strength of dispersion forces increases as the total number of electrons in the atoms or nonpolar molecules increases. The halogen group consists of four elements that all take the form of nonpolar diatomic molecules. Listed below (Table 1.1) is a comparison of the melting and boiling points for each.
TABLE 1.1: Melting and Boiling Points of Halogens Molecule F2 8
Total Number of Electrons 18
Melting Point (°C)
Boiling Point (°C)
−220
−188
Physical State at Room Temperature gas
www.ck12.org
Concept 1. Polarity and Intermolecular Forces
TABLE 1.1: (continued) Molecule Cl2 Br2 I2
Total Number of Electrons 34 70 106
Melting Point (°C)
Boiling Point (°C)
−102 −7 114
−34 59 184
Physical State at Room Temperature gas liquid solid
The dispersion forces are strongest for iodine molecules because they have the greatest number of electrons. The relatively stronger forces result in melting and boiling points which are the highest of the halogen group. These forces are strong enough to hold iodine molecules close together in the solid state at room temperature. The dispersion forces are progressively weaker for bromine, chlorine, and fluorine, as illustrated by their steadily lower melting and boiling points. Bromine is a liquid at room temperature, while chlorine and fluorine are gases. Because gaseous molecules are so far apart from one another, intermolecular forces are nearly nonexistent in the gas state, and so the dispersion forces in chlorine and fluorine only become measurable as the temperature decreases and they condense into the liquid state. Hydrogen Bonding
The attractive force between water molecules is an unusually strong type of dipole-dipole interaction. Water contains hydrogen atoms that are bound to a highly electronegative oxygen atom, making for very polar bonds. The partially positive hydrogen atom of one molecule is then attracted to the oxygen atom of a nearby water molecule (Figure 1.11).
FIGURE 1.11 A hydrogen bond in water occurs between the hydrogen atom of one water molecule and the lone pair of electrons on the oxygen atom of a neighboring water molecule.
A hydrogen bond is an intermolecular attractive force in which a hydrogen atom, that is covalently bonded to a small, highly electronegative atom, is attracted to a lone pair of electrons on an atom in a neighboring molecule. Hydrogen bonds are very strong compared to other dipole-dipole interactions. A typical hydrogen bond is about 5% as strong as a covalent bond. Hydrogen bonding occurs only in molecules where hydrogen is covalently bonded to one of three elements: fluorine, oxygen, or nitrogen. These three elements are so electronegative that they withdraw the majority of the electron density from the covalent bond with hydrogen, leaving the H atom very electron-deficient. Because the hydrogen atom does not have any electrons other than the ones in the covalent bond, its positively charged nucleus is almost completely exposed, allowing strong attractions to other nearby lone pairs. 9
www.ck12.org The hydrogen bonding that occurs in water leads to some unusual, but very important properties. Most molecular compounds that have a mass similar to water are gases at room temperature. However, because of the strong hydrogen bonds, water molecules are able to stay condensed in the liquid state. The figure below (Figure below) shows how its bent shape and the presence of two hydrogen atoms per molecule allows each water molecule to hydrogen bond with several other molecules.
FIGURE 1.12 Multiple hydrogen bonds occur simultaneously in water because of its bent shape and the presence of two hydrogen atoms per molecule.
In the liquid state, the hydrogen bonds of water can break and reform as the molecules flow from one place to another. When water is cooled, the molecules begin to slow down. Eventually, when water is frozen to ice, the hydrogen bonds become more rigid and form a well-defined network (Figure 1.13). The bent shape of the molecules leads to gaps in the hydrogen bonding network of ice. Ice has the very unusual property that its solid state is less dense than its liquid state. As a result, ice floats in liquid water. Virtually all other substances are denser in the solid state than in the liquid state. Hydrogen bonds also play a very important biological role in the physical structures of proteins and nucleic acids.
Boiling Points and Bonding Types In order for a substance to enter the gas phase, its particles must completely overcome the intermolecular forces holding them together. Therefore, a comparison of boiling points is essentially equivalent to comparing the strengths of the attractive intermolecular forces exhibited by the individual molecules. For small molecular compounds, London dispersion forces are the weakest intermolecular forces. Dipole-dipole forces are somewhat stronger, and hydrogen bonding is a particularly strong form of dipole-dipole interaction. However, when the mass of a nonpolar molecule is sufficiently large, its dispersion forces can be stronger than the dipole-dipole forces in a lighter polar molecule. Thus, nonpolar Cl2 has a higher boiling point than polar HCl.
10
www.ck12.org
Concept 1. Polarity and Intermolecular Forces
FIGURE 1.13 When water freezes to ice, the hydrogen bonding network becomes fixed until the ice melts.
Each oxygen atom has an
approximately tetrahedral geometry that includes two covalent bonds and two hydrogen bonds.
TABLE 1.2: Intermolecular Forces and Boiling Points Substance H2 Ne O2 Cl2 HCl HBr H2 S NH3 HF H2 O
Strongest Intermolecular Force dispersion dispersion dispersion dispersion dipole-dipole dipole-dipole dipole-dipole hydrogen bonding hydrogen bonding hydrogen bonding
Boiling Point (°C) −253 −246 −183 −34 −85 −66 −61 −33 20 100
Molecular and Ionic Compounds The physical state and properties of a particular compound depend largely on the type of chemical bonding it displays. Molecular compounds, sometimes called covalent compounds, display a wide range of physical properties due to the different types of intermolecular attractions discussed in this lesson. The melting and boiling points of molecular compounds are generally quite low compared to those of ionic compounds. This is because the energy required to disrupt the intermolecular forces between molecules is far less than the energy required to break the ionic bonds in a crystalline ionic compound. Since molecular compounds are composed of neutral molecules, their electrical conductivity is generally quite poor, whether in the solid or liquid state. Ionic compounds do not conduct electricity well in the solid state because of their rigid structures, but they conduct well when they are molten (in the liquid state) or dissolved in water. The water solubility of molecular compounds is variable and depends primarily on the type of intermolecular forces involved. Substances that exhibit hydrogen bonding or dipole-dipole forces are generally water soluble, whereas those that exhibit only London dispersion forces are generally insoluble. Most, but not all, ionic compounds are quite soluble in water. The table below (Table 1.3) summarizes some of the differences between ionic and molecular compounds. 11
TABLE 1.3: Comparison of Ionic and Molecular Compounds
www.ck12.org a gas at temperatures above 3500°C. The properties of these and other types of solids are discussed further in the chapter, States of Matter. An exciting demonstration of the poor conductivity of covalent bonds in a rubber stopper can be seen at http://educa tion.jlab.org/frost/stopper.html.
Lesson Summary • The difference in electronegativity between the two atoms in a bond determines the type of bond that is formed. A small difference means that the sharing of electrons is equal, and the bond is nonpolar covalent. A larger difference means that sharing is unequal, and the bond is polar covalent. A very large difference means that one or more electrons are transferred, and the bond is ionic. • Polar molecules result when polar bonds are arranged in a nonsymmetrical molecular geometry. A molecule such as CO2 contains polar bonds, but due to their arrangement, the individual dipoles cancel out to make the overall molecule nonpolar. • Intermolecular forces, such as dipole-dipole forces, London dispersion forces, and hydrogen bonds, are weak forces that exist between molecules. • The properties of molecular and ionic compounds are generally different because of the different nature of their chemical bonds.
Lesson Review Questions Reviewing Concepts
1. 2. 3. 4. 5. 6.
What range of electronegativity differences between the two bonded atoms are classified as polar covalent? What is a diatomic molecule? Give an example. What is meant by the symbols δ+ and δ− in a structural formula? Can a nonpolar molecule contain polar covalent bonds? Explain. List the three main types of intermolecular forces from weakest to strongest. For a molecule to undergo hydrogen bonding, it must have a hydrogen atom covalently bonded to an atom of one of three elements. What are those three elements? 7. Why are molecular compounds poorer conductors of electricity than ionic compounds even when both are dissolved in water? Problems
8. Arrange the following bonds in order from least polar to most polar: Al−N, Br−C, P−H, Cl−F, K−O. 9. For each molecule below, determine the molecular geometry and state whether the molecule is polar or nonpolar. a. b. c. d. e. f. g. h. 12
CBr4 H2 S BF3 PCl3 SeF4 BeCl2 ClF3 CH2 Cl2
www.ck12.org
Concept 1. Polarity and Intermolecular Forces
i. SF6 10. Which substance in each of the following pairs would be expected to have the higher boiling point? Explain. a. b. c. d. e.
ICl or Br2 HCl or HF Kr or Ar CF4 or CH4 NH3 or PH3
11. Ethanol and dimethyl ether both have the same molecular formula, C2 H6 O. However, the boiling point of ethanol is much higher (78°C) than that of dimethyl ether (−25°C). What could be the explanation for this difference?
Further Reading / Supplemental Links • Electronegativity (http://www.chemguide.co.uk/atoms/bonding/electroneg.html) • Intermolecular Bonding –van der Waals Forces (http://www.chemguide.co.uk/atoms/bonding/vdw.html) • Intermolecular Bonding –Hydrogen Bonds (http://www.chemguide.co.uk/atoms/bonding/hbond.html)
Points to Consider Lewis electron-dot structures and VSEPR theory explain the bonding patterns and molecular geometries of molecules, but not the specific way in which electrons in atomic orbitals interact with one another as a covalent bond forms. • How can atomic orbitals be modified to explain how electrons are arranged in a molecule? • How are single bonds different from double or triple bonds?
References 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
Christopher Auyeung. CK-12 Foundation. CC BY-NC 3.0 Zachary Wilson. CK-12 Foundation. CC BY-NC 3.0 Jodi So. CK-12 Foundation. CC BY-NC 3.0 Ben Mills (User:Benjah-bmm27/Wikimedia Commons). http://commons.wikimedia.org/wiki/File:Hydrogenfluoride-elpot-transparent-3D-balls.png. Public Domain Christopher Auyeung. CK-12 Foundation. CC BY-NC 3.0 Zachary Wilson. CK-12 Foundation. CC BY-NC 3.0 Joy Sheng. CK-12 Foundation. CC BY-NC 3.0 Zachary Wilson. CK-12 Foundation. CC BY-NC 3.0 Jodi So. CK-12 Foundation. CC BY-NC 3.0 Zachary Wilson. CK-12 Foundation. CC BY-NC 3.0 Ben Mills (User:Benjah-bmm27/Wikimedia Commons). http://commons.wikimedia.org/wiki/File:Hydrogenbonding-in-water-2D.png. Public Domain Image copyright Magcom, 2012; modified by CK-12 Foundation - Joy Sheng. http://www.shutterstock.com. Used under license from Shutterstock.com User:Materialscientist/Wikimedia Commons. http://commons.wikimedia.org/wiki/File:Hex_ice.GIF. Public Domain 13
