June Attendees Guide - Changes DUE 02-May-2014 - Performance

October 2014 Attendees' Guide Pittsburgh, PA, USA Performance Review Institute http://www.p-r-i.org International Headquarters 161 Thorn Hill Road Warrendale, PA 15086 USA Phone: +1.724.772.1616 Fax: +1.724.772.1699 Email: [email protected]

European Office 1 York Street London W1U 6PA UK Phone: +44.870.350.5011 Fax: +44.870.350.5022 Email: [email protected]

Asia Office (China) PRI Asia Office (China) RM 307, Building No.1, China Aero-Polytechnology Establishment No. 7Jingshun Rd, Chaoyang District, Beijing 100 028, P.R.China Telephone: +86.10.6461.9807 Fax: +86.10.6467.3087 Email: [email protected]

Asia Office (Japan) Renak Bldg, 4th Floor, 1-4 Matsushin-cho Kasugai-shi, Aichi 486-0931 Japan Phone: +81.568.35.3520 Fax: +81.568.35.3397 Email: [email protected]

As of 6 October 2014 This does not represent the official roster or guidelines for Nadcap Meetings.

TABLE OF CONTENTS Overview of PRI/Nadcap ....................................................................................................................... 2 Organizational Structure ........................................................................................................................ 3 Nadcap Subscribers .............................................................................................................................. 4 Future Nadcap Meetings ...................................................................................................................... 5 Task Groups (Operational) .................................................................................................................... 5 Getting the Most Out of Nadcap ............................................................................................................ 6 Antitrust Statement ................................................................................................................................ 7 Nadcap Personal Code of Ethics & Conflict of Interest .......................................................................... 7 Neutrality ............................................................................................................................................... 8 Export Control ....................................................................................................................................... 8 Membership Responsibilities ................................................................................................................. 8 Membership Categories......................................................................................................................... 9 Membership & Task Group Officer Codes ........................................................................................... 10 Meeting Participation & Voting Procedures .......................................................................................... 11 Supplier Voting Member Policy ............................................................................................................ 11 PRI Board of Directors ...................................................................................................................... 12 Administrative Committees Nadcap Management Council......................................................................................................... 13-14 NUCAP Management Council ............................................................................................................. 15 Supplier Support Committee ................................................................................................................ 16 Task Groups Aerospace Quality Systems (AQS) ................................................................................................. 17-18 Chemical Processing (CP) ............................................................................................................. 19-20 Coatings (CT) ..................................................................................................................................... 21 Composites (COMP) ..................................................................................................................... 22-23 Conventional Machining as a Special Process (CMSP) ...................................................................... 24 Elastomer Seals (SEAL) ..................................................................................................................... 25 Electronics (ETG) ............................................................................................................................... 26 Fluid Distribution Systems (FLU) ........................................................................................................ 27 Heat Treating (HT) ......................................................................................................................... 28-29 Materials Testing Laboratories (MTL) ............................................................................................ 30-31 Measurement & Inspection (M&I) ........................................................................................................ 32 Nonconventional Machining and Surface Enhancement (NMSE) .................................................. 33-34 Nondestructive Testing (NDT) ....................................................................................................... 35-36 Non Metallic Materials Manufacturing (NMMM) .................................................................................. 37 Non Metallic Materials Testing (NMMT) .............................................................................................. 38 Sealants (SLT) ................................................................................................................................... 39 Welding (WLD) .................................................................................................................................... 40 General Global Staff E-Mail Addresses/Telephone Extensions .................................................................... 41-42 eAuditNet Training Sessions ............................................................................................................... 43 NCSI (Nadcap Customer Service Initiative) ......................................................................................... 44 Subscriber Orientation & Tutorial ......................................................................................................... 44 Supplier Orientation & Tutorial ............................................................................................................. 44 Supplier Support Committee Meeting .................................................................................................. 44

1

OVERVIEW PRI / Nadcap Nadcap is an unprecedented cooperative industry effort to improve quality, while reducing costs, for quality assurance throughout the aerospace and defense industries. Nadcap is an industry-managed approach to conformity assessment that brings together technical experts from both industry and government in the Nadcap organization. Prime contractors, suppliers and representatives from the Government work together to establish requirements for accreditation, approve suppliers and define operational program requirements. Unlike traditional third-party programs, Nadcap is an industry managed program. This process results in a standardized approach to quality assurance and a reduction in redundant auditing throughout the aerospace industry because industry has joined forces to develop a program that: • Establishes stringent audit criteria and requirements to meet industry consensus standards of all participants • Replaces routine auditing of suppliers with one approved through a consensus decision-making process of members from the user community • Conducts more in-depth, technically superior special process audits • Improves supplier quality throughout industry through stringent requirements • Reduces costs through improved standardization • Utilizes technically expert auditors to assure process familiarity • Provides more frequent audits for primes, fewer audits for suppliers Beneficiaries of improvements resulting from Nadcap are as diverse as Nadcap's many customers. A participating prime contractor reports a saving of over $1 million annually while achieving technically superior audits. An accredited Nadcap supplier has tracked a 97% reduction in rework resulting from improvements to their system stemming from Nadcap requirements.

Nadcap Facts • Nadcap has over 2,800 accredited suppliers of special processes and products listed on the Nadcap Qualified Manufacturers List (QML) • Nadcap has conducted over 55,000 audits with 5,000+ audits expected in 2015 • Subscribing prime contractor/government - 50

2

ORGANIZATIONAL STRUCTURE Nadcap MANAGEMENT COUNCIL

3

Nadcap SUBSCRIBING PRIME CONTRACTORS/ GOVERNMENT MEMBERS • • • •

• • • • • • • • • • • • • • •

• • • • • •

309th Maintenance Wing-Hill AFB AgustaWestland Aerojet Rocketdyne Airbus Group • Aerolia • Airbus • Airbus Defence and Space • Airbus Helicopters • Premium Aerotec GmbH Alenia Aermacchi S.p.A. BAE Systems – Military Air & Information (MAI) BAE Systems Ball Aerospace & Technology Corporation The Boeing Company Bombardier Inc. COMAC Defense Contract Management Agency (DCMA) Eaton Aerospace Embraer GE Aviation • GE Avio S.r.l. GKN Aerospace GKN Aerospace Sweden AB General Dynamics • Gulfstream Aerospace Héroux Devtek Inc. (Landing Gear Division)

• • • • • • • • • •

• • •

Honeywell Aerospace Israel Aircraft Industries Latecoere Liebherr-Aerospace SAS Lockheed Martin Corporation Mitsubishi Aircraft Corporation / Mitsubishi Heavy Industries (MITAC/MHI) MTU Aero Engines AG Northrop Grumman Corporation Parker Aerospace Group Raytheon Company Rockwell Collins, Inc. Rolls-Royce SAFRAN Group Sonaca Spirit AeroSystems Textron Inc. • Bell Helicopter • Beechcraft • Cessna Aircraft Company • Textron Systems Thales Triumph Group Inc. United Technologies Corporation • Goodrich (UTAS) • Hamilton Sundstrand (UTAS) • Pratt & Whitney • Pratt & Whitney Canada • Sikorsky Aircraft

For updated information, please visit the PRI Website at www.p-r-i.org

4

FUTURE Nadcap MEETINGS March 2-6, 2015

Estrel Hotel & Convention Center Sonnenallee 225 12075 Berlin Germany Rate: €138 Single occupancy Reservation information will be posted on the PRI Website when available.

June 22-26, 2015

Fairmont The Queen Elizabeth Montreal 900 Rene-Levesque West Montreal, Quebec H3B 4A5 Canada Rate: $209 (CDN) Single occupancy Reservation information will be posted on the PRI Website when available.

TASK GROUPS (OPERATIONAL) Abbreviation AQS CP CT COMP CMSP SEALS ETG FLU HT M&I MMM MTL NDT NMC NMMM NMMT NMSE SLT WLD

Program Name Aerospace Quality Systems Chemical Processing Coatings Composites Conventional Machining as a Special Process Elastomer Seals Electronics Fluid Distribution Systems Heat Treating Measurement & Inspection Metallic Materials Manufacturing Materials Testing Laboratories Nondestructive Testing Nadcap Management Council Non Metallic Materials Manufacturing Non Metallic Materials Testing Nonconventional Machining and Surface Enhancement Sealants (Manufacturers & Distributors) Welding 5

GETTING THE MOST OUT OF Nadcap The benefits received by member companies vary in direct proportion to their participation and flowdown into their own corporate structures. Nadcap is a tool that provides significant benefits when utilized properly. In order to maximize your benefits from Nadcap, the following tips will help:

For Subscriber Members 1.

2.

3. 4.

Clearly define your objectives, support and expectations for Nadcap. Share this information with your company's key personnel and Nadcap representatives. Ensure that management decisions (e.g., require or accept Nadcap accreditation and stop own auditing) are incorporated by organization. Select personnel to represent your company to the task group who have demonstrated expertise in the task group area of responsibilities. Ensure all attendees have a basic understanding of the Nadcap process. Ensure appropriate personnel in your company (sourcing & quality) are familiar with Nadcap's operation and the company's policies concerning Nadcap. Address changes necessary in your current operations to provide for maximum implementation of Nadcap throughout your corporate structure.

For Supplier Members 1. 2.

Understand the objectives of Nadcap and participate in the improvement of the process. Attend Supplier events and meetings. Utilize the many resources available on the PRI Website (www.p-r-i.org) and eAuditNet (www.eAuditNet.com). These resources are summarized in a document found at: eAuditNet→Resources→Documents→Public Documents→Supplier Support Committee (SSC)→SSC Documents→Supplier Tools Spreadsheet

3. 4. 5. 6.

Take advantage of the Supplier Mentoring program which can pair you with an experienced supplier to help you understand the common pitfalls in audits. Perform a thorough and effective pre-audit well before your actual audit and correct any deficiencies found. Document your objective evidence. After your Nadcap audit move swiftly to identify root causes and implement effective corrective actions in response to audit nonconformances. Promote your success; notify your customers of your Nadcap accreditation. 6

ANTITRUST Associations by nature involve communications or activities among members who are business competitors. Extreme care must be exercised to avoid policies, programs, dialogues, or pursuits, which could be seen as having an intention or result of restraint of trade. Conscientious antitrust compliance and fairness to participants demand that association meetings be conducted properly. Only legitimate subjects for association discussion should be undertaken. Chairpersons have been instructed that parliamentary rules and procedures should be followed at all meetings.

Nadcap Personal Code of Ethics and Conflict of Interest All individuals (Subscribers, Suppliers, Staff, Auditors, etc.) involved with the Nadcap activity shall exhibit acceptable professional standards of conduct and uphold and advance the integrity of Nadcap. Each individual is expected to exercise impartial professional judgment to assure confidence in the integrity of Nadcap by avoiding conflicts of interest in all Nadcap related activities. When a competing interest has the potential to preclude or impair exercising one’s independent professional judgment or unreasonably jeopardize the integrity of the Nadcap activity, the individual should disassociate themselves from that particular activity. Any person associated with the Nadcap activity who believes that continued participation by any other person may jeopardize the integrity of Nadcap should bring the matter to the attention of the Nadcap Management Council. All Nadcap Staff, its Auditors, Nadcap Management Council and Task Group Members shall maintain proprietary or confidential information with which they become familiar as a result of their exposure to the supplier and/or reports during the accreditation process appropriately. Information of this type shall not be shared with individuals or organizations having no right to this information. All individuals associated with the Nadcap audit and review process shall avoid using undue influence or personal conversation to influence the audit results or the review process. Any known violations to the above policy may be reported to the ad hoc Nadcap Ethics Committee at [email protected]. 7

NEUTRALITY In keeping with the original spirit and purpose of the Nadcap program, all Nadcap meetings and related activities are to be conducted for the benefit of the aerospace industry as a whole. Activities sponsored by any individual Nadcap participant in conjunction with a Nadcap meeting or Nadcapsponsored event, including but not limited to promotional events (hospitality suites, receptions, site tours, etc.) distribution of marketing materials, etc. are discouraged by Nadcap leadership and the Nadcap Management Council . To the extent that a supplier engages in such activities and those activities interfere with the objectives of the Nadcap program, the supplier may be asked to limit/modify/refrain from such activity. EXPORT CONTROL The Nadcap process accounts for the need to control the exchange of information, data, etc. that is restricted under export control regulations. This includes information which is shared or presented during Nadcap meetings, conference calls, and in discussions between meeting attendees. All attendees must take precautions to ensure that no information or material which is restricted under any export control regulation is included in any presentation or discussion during Nadcap meetings. If you are unsure as to whether or not the data with which you’re working is restricted under the Export Administration Regulation (EAR), the International Traffic in Arms Regulation (ITAR), and/or any other international export control law(s), you are legally obligated to contact the organization with whom the data originated for clarification. RECORDING POLICY Audio or video recording of Nadcap meetings is prohibited unless formal approval is received from all attendees and recorded in the minutes. Violators of this policy will be asked to stop recording. Failure to stop recording or repeated attempts to record may result in expulsion from the meeting and/or the Nadcap program. MEMBERSHIP RESPONSIBILITIES

1. 2.

3. 4. 1. 2. 3. 4.

Subscriber members are expected to attend all Nadcap meetings. If the member is unable to attend, an alternate may be designated. Other Nadcap members should make arrangements to attend all meetings where policy, procedures, audit criteria, etc., will be discussed. Non-subscriber members shall review agenda to determine if they should attend. Reply to surveys, questionnaires, and ballots that are circulated to members. Carry through sponsorship and coordination of individual projects as assigned. Prepare checklists for auditing and continuing surveillance. Review resumes and interview auditors. Review audit reports. Participate in oversight audits.

8

MEMBERSHIP CATEGORIES Subscriber Prime

Subscriber Government

Subscriber Prime members are those aerospace or defense contractor prime companies who are Nadcap Subscribers, and Design Approval holders or Design Authorities of Aviation, Defense, and/or Space products for end use products or significant systems or subsystems for such products. Companies qualifying as Subscribers supporting Commercial Aviation shall hold approvals such as Technical Standard Order (TSO), Type Certificate (TC), Supplemental Type Certificate (STC) or Design Organization Approval (DOA) from an applicable regulatory agency or have been delegated design authority for major aircraft sections such as the fuselage, wing, or empennage from companies holding such approvals. Companies qualifying as Subscribers supporting Defense or Space shall demonstrate Design Authority of active product which is recognized by the industry as end-use products or significant systems or subsystems (such as propulsion systems, brake systems, aero structure systems, or the equivalent). These Subscriber Members have the design authority to write their own special process specifications and have internal engineering organizations to provide technical directions and support. Subscriber organizations which are structured to provide networked resources within their corporation for design and special process technical directions and support may identify subsidiary organizations or joint ventures owned by only Subscribers as part of their Subscriber Agreement with associated rights and obligations provided such organizations either meet the Subscriber Prime criteria or provide special process services solely to their corporation or joint venture corporations and not to other customers. Representative from government agencies. Has vote in all Nadcap activities.

Supplier

Active supplier who is participating in developing and revising audit criteria. Has vote in task groups on non-accreditation matters.

Liaison/Specialist

Individual who has specific technical knowledge for a particular task group.

Pending Subscriber

Same as Subscriber. This grade is temporary to allow new Subscribers to participate.

Observer

May attend Nadcap meetings. May attend audit reviews by invitation only.

9

MEMBERSHIP CODES UVM

SUBSCRIBER VOTING MEMBER - An appointed participator of the Nadcap system.

SVM

SUPPLIER VOTING MEMBER - A supplier member voting on nonaccreditation matters within the Task Group.

ALT

ALTERNATE VOTING MEMBER - A qualified individual designated by a Voting Member to act in their absence.

MBR

MEMBER - Appointed individual who participates by attending meetings, answering questionnaires, and furnishing pertinent technical information and expertise. Member has no formal vote.

GVT

A government representative. If voting member, will have "UVM" code.

LVM

LIAISON VOTING MEMBER - A voting member representing a corporation other than an OEM (i.e., a society or association). TASK GROUP Officer Codes

CHR

Chairperson

VCH

Vice Chairperson

SEC

Secretary

10

MEETING PARTICIPATION AND VOTING PROCEDURES Meeting Participation • All members can attend open meetings. Subscriber meetings (closed meetings) may be attended only by subscribers, pending subscribers or government members. NMC Voting Member Only meetings may be attended only by NMC Voting Members. Other members may be included in Closed or NMC Voting Member Only meetings at the invitation of the Chairperson. • At Closed meetings, audit reports are reviewed, or accreditation status of suppliers is discussed. Voting • Nadcap Management Council: Majority of eligible members present with a minimum of five subscriber members. • All other meetings: Majority of eligible members present with a minimum of three subscriber members, or per Task Group procedure. • When discussing critical issues, chairperson may call for voting members or subscriber members vote only.

NMC SUPPLIER VOTING MEMBER POLICY Each Nadcap commodity task group may have one appointed supplier member with full voting privileges at Council, on non-accreditation matters. The total number of supplier voting members shall be limited to 50% of the total number of Subscriber voting members, and the number of supplier votes shall not exceed 33⅓ % of Council voting members. The Nadcap Management Council Chairperson will maintain the right to call for a Subscriber vote only.

11

PRI BOARD OF DIRECTORS Stan Adachi Divisional Director, Supplier Quality Defense, Space and Security The Boeing Company

Anna “Graham” Morast Director, Group Quality Pratt & Whitney Alan Partridge Head of Laboratories Rolls-Royce

Richard A. Amato Manager, Manufacturing Engineering MECoE, Supply Chain Division GE Aviation

David L. Schutt, PhD Chief Executive Officer SAE

Severin Drogoul Vice President – Business Improvement & Quality Airbus Group

Junji Tsuji Manager of Manufacturing Technology Group of Production Planning Department, Aero-Engine and Space Operations IHI Corporation

Etienne Galan Vice President Purchasing Snecma (Safran Group)

Li Wei General Director, Quality and Safety Department Aviation Industry Corporation of China

Michael J. Hayward Sector Director International & Logistics Excellence Northrop Grumman Aerospace Systems

Jianqiang Xu Deputy General Manager of Science, Technology & Quality Department; C919 Program Chief Quality Officer Research Fellow Commercial Aircraft Corporation of China Ltd. (COMAC)

Mario Langlois (Chairman) Director, Quality Engineering & Safety Office Bombardier Aerospace Tony Maguire BSc, MCQI CQP Head of Quality Hawk Aircraft Programmes BAE Systems PLC Ron Meester Vice President, Global Quality Honeywell Aerospace

12

Nadcap MANAGEMENT COUNCIL (NMC) Subscriber / Government Voting Members Latchezar Anguelov SAFRAN ALT/UVM +1 450 434 3400 x6243 David Bale Pratt & Whitney Canada +1 905 564 4070 Dietmar Becher Liebherr Aerospace +49 8381 46 4717 Michael Bess DCMA ALT/UVM +1 804 734 0414 Pascal Blondet Airbus +33 561 180439 Richard Blyth Rolls-Royce +44 752 897 5719 Vice Chairperson Robert Bodemuller Ball Aerospace & Technology Corp. +1 303 939 4606 Katie Bradley Lockheed Martin +1 817 655 6410 Christopher Brust DCMA +1 804 734 0345 Robert Cashman Parker Aerospace Group +1 949 465 4061 David Cianfrini BAE Systems, Electronic Systems +1 603 885 4464 Russell Cole Northrop Grumman +1 321-951-5662 Jim Diamond 309th Maintenance Wing, Hill AFB +1 801 775 5318 Harold Finch Spirit AeroSystems +1 316 371 8760 Jose Eduardo Freire Embraer S.A. ALT/UVM +55 12 3927 1051 Hidekazu Furugori Mitsubishi Aircraft Corporation John Haddock BAE Systems – Military Air Solutions +44 1254 765015

Tim Hayes Gulfstream Aerospace +1 912 395 0171 Martha Hogan-Battisti The Boeing Company ALT/UVM Scott Iby Hamilton Sundstrand (UTAS) +1 860 654 6106 Jason Jolly Cessna Aircraft Company +1 316 517 4792

Michael Murray Beechcraft Corporation Ana Cristina Ottani dos Santos Embraer S.A. +55 12 3927 8939 Rick Peterson Rockwell Collins, Inc. +1 321 768 7286 Alberto Portal Airbus Defence And Space +34 954 594 479 Fabrizio Quadrini AgustaWestland

Karen Kim Sikorsky Aircraft +1 203 386 7630 Scott Klavon PRI Secretary (Non-Voting) +1 724 772 7111 Bob Koukol Honeywell Aerospace ALT/UVM +1 310 512 2058 Ralph Kropp MTU Aero Engines AG +49 89 4 89 4035

Mark Rechtsteiner GE Aviation +1 513 243 6744 Per Rehndell GKN Aerospace Sweden AB + 46 520 292 185 Brad Richwine Raytheon Company +1 508 309 8374 Victor Schonberger Israel Aerospace Industries +972 52 3663522

Serge Labbé Héroux Devtek ALT/UVM +1 450 679 5454 ext. 4264

Lisa Shaw Eaton, Aerospace Group +1 517 937 7360

Daniel Lecuru Airbus Helicopters +33 4 42 85 60 74

Henry Sikorski Pratt & Whitney ALT/UVM

Eric LeFort Sonaca +32 71 25 5560

Asa Snitchler Beechcraft Corporation ALT/UVM

Howard Jeff Lott The Boeing Company +1 562 547 6645

David Soong Pratt & Whitney +1 860 557 4248

Frank Mariot Triumph Group Inc. +1 818-917-1420

Angela Vitale Alenia Aermacchi S.p.A. Kevin Ward Goodrich (UTAS) +1 602 750 4955 Chairperson

Scott Maitland Goodrich (UTAS ALT/UVM Jean-Philippe Mathevet SAFRAN Group Steve McGinn Honeywell Aerospace +1 602-231-2230 Robin McGuckin Bombardier Aerospace +44 28 90462697

13

Kirk Whalen Héroux Devtek +1 519 576 8910 Ext. 2708 George Winchester Northrop Grumman ALT/UVM +1 321 951 5435 Nadcap MANAGEMENT COUNCIL Continued on next page

Nadcap MANAGEMENT COUNCIL (NMC) Voting Members Continued Supplier Voting Members Corwyn Berger Exova, Inc. (MTL Task Group) +1 630 221 0385 ext. 76209

David Jones 3P Processing Inc. (NMSE Task Group) +1 316 943 0731

Vitorio Stana Avcorp Industries Inc. (COMP/NMMM/NMMT Task Group) +1 604 587 4880

Michael Brandt Alcoa, Inc. (Heat Treating Task Group) +1 724 337 2062

David Michaud Fountain Plating Company (M&I Task Group)

Vern Talmadge Howmet Thermatech Coatings +1 231 894 7778 (Coatings Task Group)

Tim Crowe Hunting Dearborn (CMSP Task Group) +65 6933 1777 Jim Cummings Metal Finishing Company (Chemical Processing Task Group) +1 316 267 7289

Tom Newton Aircraft X-Ray Laboratories (Supplier Support Committee) +1 818 262 4421 Michael Schleckman Voss Industries, Inc. (Welding Task Group) +1 216 771 7655 ext. 304

14

Gary White Orbit NDT (NDT Task Group)

NUCAP MANAGEMENT COUNCIL (NuMC) NUCAP (Nadcap Users Compliance and Audit Program) provides Nadcap Prime Subscribers a uniform method for self-certification of captive special processes in accordance with industry standards and requirements. Subscriber/Government Voting Members Latchezar Anguelov SAFRAN Group ALT/UVM

Scott Maitland Goodrich (UTAS) ALT/UVM

Pascal Blondet Airbus Chairperson

Muriel Malhomme Airbus ALT/UVM

Richard Blyth Rolls-Royce

Frank Mariot Triumph Group Inc. Vice Chairperson

Christian Buck SAFRAN Group

Doug Matson The Boeing Company ALT/UVM

Jim Diamond 309th Maintenance Wing – Hill AFB

Steve McGinn Honeywell Aerospace

Harold Finch Spirit AeroSystems

Robin McGuckin Bombardier

John Haddock BAE Systems Military Air & Information (MAI)

Alberto Portal Airbus Defence And Space

Robert Koukol Honeywell Aerospace ALT/UVM

Fabrizio Quadrini AgustaWestland

Serge Labbé Héroux Devtek

Mark Rechtsteiner GE Aviation

Daniel Lecuru Airbus Helicopters

Angela Vitale Alenia Aermacchi S.p.A.

Jeff Lott The Boeing Company

Kevin Ward Goodrich (UTAS)

15

SUPPLIER SUPPORT COMMITTEE (SSC) (Scott Klavon, +1 724 772 7111, [email protected]) (Connie Hess, +1 724 772 8660, [email protected]) (Shannon McMeans, +1 724 772 8659, [email protected])

Mission Statement: The Nadcap Supplier Support Committee (SSC) mission is to represent the Supplier community and work with the Nadcap Management Council (NMC) to enhance the effectiveness and economical value of the Nadcap system for the mutual benefit of Suppliers and Subscribers.

Vision Statement: The Supplier Support Committee (SSC), a body of Supplier volunteers, serves as a consolidated voice to the NMC and advocates on behalf of all Suppliers. The SSC will contribute as a trusted partner with all stakeholders to the continual effectiveness of the Nadcap process. Our success will be realized through strict adherence to our core values of respect, responsiveness, engagement and accountability.

Core Values: • •

•

Respect: Support the entire Supplier community with mutual respect. Responsiveness: Capture, listen and respond to the Supplier needs/questions in a timely manner.

•

Engagement: Create an atmosphere that promotes Supplier involvement. Accountability: Accountability rests on the contributions of the Leadership Team.

Guiding Principles: We are committed to… • The integrity of our relationship with our fellow Suppliers and value their participation and commitment to continuous program improvement • Complete transparency to maintain the value of the Supplier voice • Facilitating alignment between the Suppliers, PRI and NMC • Communicating with all stakeholder groups that allows innovative ways to enhance the program • Sustaining advocacy of all current and future Supplier needs and expectations • Assisting Suppliers with their non-technical needs

SSC Leadership Team Dale Harmon Cincinnati Thermal Spray Inc. (SSC LT Vice Chair)

Eric Jacklin F.M. Callahan & Son, Inc. (SSC LT Past Chair Advisor)

Tom Newton Aircraft X-Ray Laboratories (SSC LT Chairperson)

Jonathan Hebben Ducommun AeroStructures (SSC LT Secretary)

David Michaud Fountain Plating Co. (SSC LT Americas)

Jim Ringer Tech Met (SSC LT Americas)

Dale Harmon Cincinnati Thermal Spray (SSC Helpdesk)

Lisa Jensen-Donahoe Alcoa (Mentor)

Steve Payne Praxair Surface Technologies Inc. (Flowdown)

Gary White Orbit Industries (SSC Task Group Representatives)

Jonathan Hebben Ducommun AeroStructures (Metrics)

David Michaud Fountain Plating Co. (NMC Standardization Liaison)

Jim Ringer Tech Met (Survey Action Team)

Roy Adkins Braddock Metallurgical (HT Task Group)

Bryan Hall NSL Analytical (MTL Task Group)

Dave Michaud Fountain Plating Co. (CP Task Group)

Juston Bartlett Huntington Dearborn, Inc. (M&I Task Group)

Dale Harmon Cincinnati Thermal Spray Inc. (CT Task Group)

Michael Schleckman Voss Industries (Welding Task Group)

Tim Crowe Hunting Dearborn Inc. (CMSP Task Group)

John Hudspeth International Seal (Elastomer Seals Task Group)

Doug Schueller Abel Conn LLC (ETG Task Group)

David Eshleman The Young Engineers, Inc. (AQS Task Group)

Dave Jones 3P Processing Inc. (NMSE Task Group)

Lei Bao China Iron & Steel Research Institute Group (SSC LT Asia) Lloyd Barker Alcoa Inc. (SSC LT Americas) Paul Evans JFIMS (SSC LT Europe)

SSC Sub Team Leaders

SSC Task Group Representatives

16

Vitorio Stana Avcorp Industries Inc. (COMP/NMMM/NMMT Task Groups) Gary White Orbit Industries, Inc. (NDT Task Group)

AEROSPACE QUALITY SYSTEMS (AQS) (Susan Frailey, +1 618 615 4478, [email protected]) (Mike Gutridge, +1 740 587 9841, [email protected]) The Aerospace Quality Systems Task Group is conducting audits to demonstrate compliance to the PRI AC7004. This quality system audit is required where no existing quality system approval exists in accordance with the Nadcap Operating Procedure NOP-002. TASK GROUP VOTING MEMBERS Subscriber Voting Members Patrice Bleau Bombardier, Inc. UVM

David Day GE Aviation UVM

Jeff Robb Cessna Aircraft Company UVM

Robert Bodemuller Ball Aerospace & Technologies UVM

Harold Finch Spirit AeroSystems, Inc. VCH/ALT/UVM

Patricia Wesemann The Boeing Company ALT/UVM

Robin Borrelli The Boeing Company CHR/UVM (Chair – October 2012)

Angelina Mendoza Goodrich (UTAS) UVM

Russell Cole Northrop Grumman Corporation UVM Chris Davison Spirit AeroSystems UVM

Supplier Voting Members David Eshleman The Young Engineers, Inc. SVM

Scott O’Connor Honeywell Aerospace UVM Earl Pruett Lockheed Martin Corp. UVM

Jim Tuminello Tech Met SVM

David Jones 3P Processing SVM

17

AEROSPACE QUALITY SYSTEMS (AQS) (Susan Frailey, +1 618 615 4478, [email protected]) (Mike Gutridge, +1 740 587 9841, [email protected]) AQS LIAISONS Robin Borrelli The Boeing Company COMP Task Group

Earl Pruett Lockheed Martin WLD Task Group

Bruce Brownfield Lockheed Martin Corp. HT Task Group

Jeff Robb Cessna Aircraft Company NMSE Task Group

David Day GE Aviation CMSP Task Group

Gilbert Shelby Raytheon ETG Task Group

Joel Mohnacky Hamilton Sundstrand (UTAS) CT Task Group

Pete Torelli The Boeing Company NDT Task Group

18

CHEMICAL PROCESSING (CP) (Mike Graham +1 724 772 8646, [email protected]) (Nigel Cook, +44 (0)1332 869274, [email protected]) (William Calvert +1 724-772-8524, [email protected]) (Robert Nixon +1 724-772-8596, [email protected]) The Chemical Processing Task Group is conducting audits to demonstrate compliance to the AC7108 series of documents. These audits address the following types of processes: • Stripping • Etching • Anodizing • Surface Prep Prior to Metal Bond • Laboratory Evaluation • Chemical Cleaning • Surface Treatment/Passivation • Paint/Dry Film Coatings • Chemical Milling • Vacuum Cadmium & Aluminium IVD • Plating • Conversion/Phosphate Coating

TASK GROUP VOTING MEMBERS Subscriber Voting Members Hal Abel Raytheon Co. UVM

Laurent Geerts Sonaca UVM

David Neal Rolls-Royce PLC UVM

Yuhui Sun COMAC UVM

Daniel Amara Israel Aerospace Industries UVM

Greg Haataja Bell Helicopter Textron ALT/UVM

Jerker Nordh GKN Aerospace Sweden AB UVM

Mihn Quan Triumph Aerostructures – VAD Fort Worth ALT/UVM

Tomohiko Ashikaga Mitsubishi Heavy Industries Ltd. UVM

Gerald Harvey Triumph AeroStructures - VAD ALT/UVM

Jim O’Shea GE Aviation ALT/UVM

Cary Baker The Boeing Company ALT/UVM

John Koenig The Boeing Company UVM

Eric T. Oswald Raytheon Co. ALT/UVM

Malik Boutoba Airbus Helicopters UVM

Martin Kolinko Eaton, Aerospace Group UVM

Jeremy Phillips Cessna Aircraft Company UVM

Craig Bowden BAE Systems – MAI ALT/UVM

Bob Koukol Honeywell Aerospace ALT/UVM

Fabrizio Quadrini AgustaWestland UVM

Bob Cashman Parker Aerospace Group UVM

Serge Labbé Héroux Devtek Inc. UVM

Muralikrishnan Ramalingam GE Aviation UVM

Jim Chan Honeywell Aerospace UVM

Marc-André Lefebvre Héroux Devtek Inc. ALT/UVM

Chris Reilly Hamilton Sundstrand (UTAS) ALT/UVM

Michael Coleman The Boeing Company ALT/UVM

Nathalie Le Pottier Airbus Helicopters ALT/UVM

Josefa Rodriguez Baena Airbus Defence And Space UVM

Alessio Colombara AgustaWestland ALT/UVM

Susan Lewis Lockheed Martin Corporation UVM

Corazon Santos The Boeing Company ALT/UVM

Karyn Deming Goodrich (UTAS) CHR/UVM (Chair – February 2014)

Mihaela Lupu SAFRAN Group ALT/UVM

Jonathan Scudder Pratt & Whitney UVM

Bob Denney Honeywell Aerospace ALT/UVM

Nick Magnapera BAE Systems Inc. Electronic Systems UVM

Richard Shain General Dynamics Corp. ALT/UVM

Peter Droste Airbus UVM

Veronique Marcel SAFRAN Group UVM

Robert Faticanti Textron Systems UVM

Angelina Mendoza Goodrich (UTAS) ALT/UVM

Aleck Featherston Jr. Bell Helicopter Textron UVM

Tom Moreland Bombardier Inc. UVM

Sylvia Franklin The Boeing Company ALT/UVM

Raj Nagarajan General Dynamics Corp. UVM

Mariusz Stanczyk Lockheed Martin Corporation ALT/UVM Paul Slater Rockwell Collins Inc. UVM Steve Starr Honeywell Aerospace UVM Mike Stolze Northrop Grumman Corporation VCH/UVM

19

Zia Usmani BAE Systems - MAI UVM Shawn Vierthaler Spirit AeroSystems Inc. UVM Michael Vosatka Rockwell Collins Inc. ALT/UVM Gene Wallace Triumph Aerostructures – VAD Fort Worth UVM Miao Wang COMAC ALT/UVM Wei Wang COMAC ALT/UVM Sergey Yesilevich Hamilton Sundstrand (UTAS) UVM CHEMICAL PROCESSING continued on next page

CHEMICAL PROCESSING (CP) (Mike Graham +1 724 772 8646, [email protected]) (Nigel Cook, +44 (0)1332 869274, [email protected]) (William Calvert +1 724-772-8524, [email protected]) (Robert Nixon +1 724-772-8596, [email protected])

TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Mark Airey Robert Stuart Ltd. SVM

Gary Fox Anodyne, Inc. SVM

Rosa Martin Superior Plating Inc. SVM

Gardiner Rynne Chem Processing Inc SVM

Daniel Backus Har-Conn Chrome Co. SVM

Ron Franklin ChemResearch Co. Inc. SVM

Cory McGraw P M Testing Laboratory Inc. SVM

Guy Saenz Hi-Tech Metal Finishing SVM

Phillip Bratton Hohman Plating & Mfg Inc. SVM

Alex French Aerofin Laboratories Ltd. ALT/UVM

David Michaud Fountain Plating Co. SVM

Tammi Schubert LMI Finishing Inc. SVM

Phil Brockman TechMetals Inc. SVM

Paul French Aerofin Laboratories Ltd. SVM

William Miller Hohman Plating & Mfg. Inc. ALT/SVM

David Serbousek Olympic Scientific Inc. SVM

Larry Carlson PPI Aerospace SVM

Sarah Fuqua Kearfott Corporation – Motion System Division SVM

Simone Murphy-Fickenworth Chrome Plus International SVM

Dave Sexton III Certified Metal Finishing, Inc. SVM

Abdul Nathani Hi-Tech Metal Finishing ALT/SVM

Ken Shouse Lord Corporation ALT/SVM

Julie Nguyen Element Materials Technology SVM

Steve Simacek Hytek Finishes Company SVM Vitorio Stana Avcorp Industries Inc. SVM

John Carpenter U.S. Chrome Corp. of Connecticut SVM

Tim Hamlett Certified Metal Finishing, Inc. ALT/SVM

Stephane Chaumeil Galion SVM

Jonathan Hebben Ducommun Inc. SVM

Steve Crest Stabile Plating SVM

Bill Heeter Skills Inc. SVM

Mike Noettl Magnetic Inspection Laboratory Inc. SVM

Jim Cummings Metal Finishing Co. SVM

Blanca E. Huerta Bowman Plating Company, Inc. SVM

Dihn Ngo GKN Aerospace Chem-tronics Inc. SVM

Eric Jacklin F.M. Callahan & Son Inc. SVM

Gregory Penny Triumph Processing, Embee Division, Inc. SVM

Warren DeCuir Lisi Aerospace Torrance SVM Jorge DellaCosta Chrome Plus International ALT/SVM Jim Denton B-D Industries Inc. SVM Bruce Dobbins Aetna Plating Company SVM Ben Flores Applied Aerospace Structures Corp. SVM

David Jones 3P Processing Inc. SVM

Kim Porter Poly-Metal Finishing SVM

Cindy Klingler AAA Plating & Inspection, Inc. ALT/SVM

Dennis Reidy CIL / Adtec SVM

Richard Kline X-R-I Testing SVM

Ken Rettger Lord Corporation SVM

Keven Kudelka Westfield Electroplating Co. SVM

Jim Ringer Tech Met SVM

Jeff Logan Saporito Finishing Company ALT/SVM

Cynthia Roth Team Industrial Services TCM Division SVM

20

Milt Stevenson Anoplate Corp. SVM Steve Stone Saporito Finishing Company SVM Yoshiomi Sukesada Asahi Kinzoku Kogyo Inc. SVM Mitchell Tanner Triumph Processing, Embee Division, Inc. ALT/UVM Jim Tuminello Tech Met ALT/SVM Jerry Wahlin AAA Plating & Inspection Inc. SVM

COATINGS (CT) (Robert Lizewski, +1 724 772 8681, [email protected]) (Jim Lewis +1 724 772 8688, [email protected]) The Coatings Task Group is conducting audits to demonstrate compliance to the PRI AC7109 series of standards. These documents contain the Nadcap requirements for the following: • • • •

• • •

Thermal Spray Vapor Deposited Coatings Diffusion Coating Processes Stripping of Coating Materials

Coating Evaluation Plating of Coated Parts Heat Treating of Coated Parts

TASK GROUP VOTING MEMBERS Subscriber Voting Members Tim Pruitt Rolls-Royce ALT/UVM

Nicolas Barthelemy Airbus Helicopters UVM

Erkan Kilic GE Aviation ALT/UVM

Fabrice Crabos SAFRAN Group (Turbomeca) UVM

Björn Kjellman GKN Aerospace Sweden AB ALT/UVM

James Dunn GE Aviation UVM

Dan Loveless Parker Aerospace UVM

Ben Evans Goodrich (UTAS) UVM

Joel Mohnacky Hamilton Sunstrand VCH/UVM

Udo Schuelke Honeywell Aerospace CHR/UVM (Chair – July 2014) +1 602 231 3619 [email protected]

Patrick Kiernan Rolls-Royce UVM

Francis Monerie-Moulin SAFRAN Group ALT/UVM

Jan Wigren GKN Aerospace Sweden AB UVM

Brent Bartlett Sulzer Metco Canada Inc. SVM

John Passmore St. Louis Metallizing SVM

Ronald Stewart Ellison Surface Technologies SVM

Dale Harmon Cincinnati Thermal Spray SEC/SVM

Steve Payne Praxair Surface Technologies SVM

Vern Talmadge Howmet Thermatech Coatings SVM

Jack Saunders Honeywell Aerospace ALT/UVM

Supplier Voting Members

ATTENTION ALL Nadcap COATINGS (CT) SUPPLIERS In order to smoothly facilitate your upcoming Nadcap initial or re-accreditation audit, the Nadcap Coatings Task Group would like you to be aware that eAuditNet contains numerous self-help documents to guide through the process. The path provided below will lead you to the Coatings Audit Resources file which is a quick and easy reference tool providing links to numerous self-help documents pertinent to every stage of the Nadcap audit process. You are encouraged to take advantage of these valuable self-diagnostic references prior to your Nadcap audit. They may help you to avoid many of the most common findings and maximize your benefit throughout the audit while minimizing overall costs to your business. Path: eAuditNet→Resources→Documents→Public Documents→Coatings→Coatings Audit Resources The Nadcap Coatings Task Group is committed to continually improving the program for all participants and welcomes all suggestions that support their efforts. Please do not hesitate to contact Bob Lizewski with your suggestions or attend a Nadcap meeting to contribute your ideas in person.

21

COMPOSITES (COMP) (John Tibma +1 724 772-7148, [email protected]) The Composites Task Group is conducting audits to demonstrate compliance to the PRI AC7118. These audits address the Nadcap requirements for the following processes: • CMP – Compression Molding • MB – Metal Bonding • CP – Core Processing • PAR – Prepeg/Adhesive Bonding/Resin Film Infusion • LRP – Liquid Resin Processing

TASK GROUP VOTING MEMBERS Subscriber Voting Members Monica Alcala Honeywell Aerospace UVM

Patrick Dunleavy SAFRAN Group ALT/UVM

Herman Leibovich Israel Aircraft Industries UVM

Elliott Schulte Bell Helicopter ALT/UVM

Tomohiko Ashikaga Mitsubishi Heavy Industries UVM

Joe Dwyer Rolls-Royce ALT/UVM

Frank Lennert The Boeing Company ALT/UVM

Sally Spindor Triumph Group Inc. ALT/UVM

Achim Enzmann Airbus Helicopters UVM

Lance Loeks The Boeing Company UVM

Anne Stanley Bombardier Inc. UVM

Olivier Goupillon Airbus Helicopters ALT/UVM

William Macias Goodrich (UTAS) ALT/UVM

Colin Stuart Rolls-Royce UVM

Laura Benedetti SAFRAN Group UVM

Steve Grunshaw BAE Systems – Military & Air Information (MAI) ALT/UVM

Leah Markowitz Honeywell Aerospace ALT/UVM

Frank Thomas Bombardier Inc. ALT/UVM

Pam Blevins General Dynamics UVM

Richard Hammond The Boeing Company ALT/UVM

Andreas Mastorakis GE Aviation UVM

Justin Walker Spirit AeroSystems ALT/UVM

Ping Chen COMAC UVM

Brett Hemingway BAE Systems – Military & Air Information (MAI) UVM

Angelina Mendoza Goodrich (UTAS) ALT/UVM

Yuhui Yuan COMAC ALT/UVM

Larry Olsen Northrop Grumman Corporation UVM

Composites continued on next page

Peter Atwell Airbus SEC/UVM Michael Bemis Goodrich (UTAS) UVM

David Constable Airbus ALT/UVM Lucia Cutillo Alenia Aermacchi S.p.A UVM Laurent DeJaie Sonaca ALT/UVM Joseph DeVirgilio The Boeing Company ALT/UVM Kevin Dowling Spirit AeroSystems UVM

Mark Jackson Triumph Group Inc. UVM

Rick Ouellette The Boeing Company ALT/UVM

Evelyn Jacobson Pratt & Whitney UVM

Keith Panuska Lockheed Martin Corporation VCH/UVM

John Key Jr. Bell Helicopter CHR/UVM (Chair – October 2012)

Jeremy Phillips Cessna Aircraft Company UVM

Betty Kocsis Honeywell Aerospace ALT/UVM

Alberto Portal Airbus Defence And Space UVM

Eric LeFort Sonaca UVM

22

COMPOSITES (COMP) (John Tibma +1 724 772-7148, [email protected]) TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Frank Alberto Park Aerospace Technologies Corp. SVM Natalia Becerra Pozo Exova (UK) Limited SVM Kevin Brennan Swift Engineering Inc. SVM Tom Brooks Applied Composites Engineering ALT/SVM Jim Brown Hexcel Corporation SVM Gordon Cameron Integrated Technologies Inc. SVM

Breton Lutz DuPont de Nemours and Company SVM

Patrick Durkin TE Wire Liaison Ben Flores Applied Aerospace Structures ALT/SVM Mike Guthmiller Applied Aerospace Structures SVM Rick Heise Swift Engineering Inc. ALT/SVM Hubert Kern FACC AG SVM Tommie Lakes GKN Aerospace SVM

23

Jeff Rybolt Applied Composites Engineering SVM Vitorio Stana Avcorp Industries Inc. SVM Arno Toelkes Euro-Composites SVM Jim Weishampel Dupont de Nemours and Company ALT/SVM

CONVENTIONAL MACHINING AS A SPECIAL PROCESS (CMSP) (Andy Statham +44 133 286 9276, [email protected]) The Conventional Machining as a Special Process (CMSP) Task Group is conducting audits to demonstrate compliance to the AC7126 series of checklists for conventional machining as a special process. These audits address the following types of processes: • • •

Holemaking Turning Grinding

• Broaching • Milling • Edge Treatment TASK GROUP VOTING MEMBERS

Subscriber Voting Members Ken Abram Honeywell Aerospace CHR/UVM (Chair – October 2011) Ertem Aygin GE Aviation ALT/UVM Charles Beargie Goodrich (UTAS) UVM Zeljko Calija Goodrich (UTAS) ALT/UVM

Philippe Durand Airbus Helicopters UVM

Scott Maitland Goodrich (UTAS) ALT/UVM

Vincent Dutilh SAFRAN Group UVM

John Pfeiffer GE Aviation SEC/UVM

Dan Graves Goodrich (UTAS) ALT/UVM

Alex Pohoata Honeywell Aerospace ALT/UVM

Yann Jeffredo SAFRAN Group VCH/ALT/UVM

Douglas Webb Honeywell Aerospace ALT/UVM

James Jensen Moeller Manufacturing Co

Karsten Riemer Aerotech Peissenberg GmbH SVM

Supplier Voting Members Tim Crowe Hunting Dearborn Inc. SVM

SVM

Brad Gould Hunting Dearborn Inc. ALT/SVM

Andy March Hunting Dearborn Inc. ALT/UVM

24

ELASTOMER SEALS (SEALS) (Keith Purnell +1 724 772 8685, [email protected]) The Elastomer Seals Task Group is conducting product audits to demonstrate compliance to AC7115. Audit elements include: O-rings, plate seals / rubber bonded to substrates, molded shapes, compounding & compression seals. TASK GROUP VOTING MEMBERS Subscriber Voting Members Michelle Brunet The Boeing Company ALT/UVM

Marc Gage Hamilton Sundstrand (UTAS) UVM

Benjamin Shaw Rolls-Royce ALT/UVM

Tara Campbell Rolls-Royce UVM

David Grulke Hamilton Sundstrand (UTAS) ALT/UVM

Bob Teegarden Honeywell Aerospace ALT/UVM

Brent Clothier Cessna Aircraft Company UVM

Patrick Heppe The Boeing Company UVM

Estrella Watson Goodrich (UTAS) VCH/UVM

Kent DeFranco Lockheed Martin Corporation UVM

Jeffrey Kingsley Air Force UVM/GVT

Melissa Facas Pratt & Whitney UVM

Manuel Koucouthakis Honeywell Aerospace CHR/UVM (Chair – October 2005)

Supplier Voting Members Jon Cutler Trelleborg Sealing Solutions SVM

Mark Keal Meggitt Aerospace Limited SVM

John Dickinson Parker Hannifin ALT/SVM

Scott Kronabetter Micro-tronics Inc. SVM

John Hudspeth International Seal SVM

Royce McDaniel Parker Hannifin SVM

25

David Sykes Meggitt Aerospace Limited ALT/SVM

ELECTRONICS (ETG) (Susan Frailey +1 618 615 4478, [email protected]) (Julia Markardt, +1 724 772 8649 [email protected]) The Electronics Task Group is conducting electronics audits to demonstrate compliance to AC7119 Printed Boards, AC7120 Circuit Card Assemblies, and AC7121 Cable and Harness Assemblies. TASK GROUP VOTING MEMBERS Subscriber Voting Members Roger Bloomfield Goodrich (UTAS) ALT/UVM

Eric Lacourt Thales UVM

Junta Okutsu Honeywell Aerospace ALT/UVM

William Cardinal Hamilton Sundstrand (UTAS) UVM

Philippe Larivee Thales ALT/UVM

Richard Rumas Honeywell Aerospace CHR/UVM (Chair-January 2014)

Frank Cristofol BAE Systems UVM

Nathalie LeFevre SAFRAN Group UVM

Roy Garside Rolls-Royce VCH/UVM

John Mastorides Honeywell Aerospace ALT/UVM/SEC

Jerome Hery SAFRAN Group ALT/UVM

Scott Meyer Goodrich (UTAS) UVM

Gilbert Shelby Raytheon Company UVM Magali Vigier Airbus UVM Barbara Waller Raytheon Company ALT/UVM

Supplier Voting Members Julie Barker Cristek Interconnects, Inc ALT/SVM

Jean-Francois Mahe SELHA SVM

Cristiano Bazzi Somacis SpA SVM

Ishwar Mathur IEC Electronics Corp. - Newark SVM

Paul Comer Graphic Plc SVM

Douglas Schueller AbelConn LLC SVM

Jose Lages Meggitt Sensing Systems SVM

Matthew Smith Logic PD SVM

Donna Lopez Cristek Interconnects, Inc SVM

Kees van der Schoor Fokker Elmo B.V. SVM

26

Juan Vasquez Viasystems North American Operations SVM

Jennifer Wagner Ducommun LaBarge Tech SVM

FLUID DISTRIBUTION SYSTEMS (FLU) (Keith Purnell +1 724 772 8685, [email protected]) The Fluid Distribution Standards Task Group is conducting product audits to demonstrate compliance to AC7112, AC7112/1, AC7112/2, AC7112/3, AC7112/4, AC7112/6 and AC7123. These audits address the following: • Hose Manufacturing • Hose Assembly • Fittings & Other Machined Components • Value Added Hose Assembly Distributors • Couplings • Titanium Tubing Manufacturers TASK GROUP VOTING MEMBERS Subscriber Voting Members Shweta Aggarwal Rolls-Royce UVM

Terence Chin NAVAIR UVM/GVT

Mark Scott The Boeing Company UVM

Keith Allen Rolls-Royce UVM

Erwin Oman Bombardier UVM

Dan Smith GE Aviation UVM

James Barnett Rolls-Royce ALT/UVM

Mark Paul Rolls-Royce UVM

Joe Bebey The Boeing Company ALT/UVM

Robert Schreiber The Boeing Company CHR/UVM (Chair – September 2008) +1 610 591 7660

Samuel Buri The Boeing Company VCH/UVM

Supplier Voting Members Mark Scatoloni Spencer Aerospace Manufacturing, LLC SVM

Michael Schleckman Voss Industries SVM Chris Schofield Hydraflow SVM

27

Phillip Wade Smiths Tubular Systems Laconia SVM

HEAT TREATING (HT) (Jerry Aston + 44 133 286 9273, [email protected]) (Marcel Cuperman +1 412 367 2547, [email protected]) (Rob Hoeth +1 724 772 8657, [email protected]) (Stan Revers + 44 133 286 9271, [email protected]) The Heat Treating Task Group has developed AC7102 requirements and checklists that include the following: • Metal Systems – Carbon & Alloy Steels, Stainless Steel, pH Stainless Steels, Cast Iron, Aluminum Alloys, Titanium Alloys, Heat Resisting Alloys, Magnesium, Other Nonferrous Metals • Heat Treating Process – Normalizing, Annealing, Hardening and Tempering, Solution Heat Treating, Aging, Carburizing, Nitriding, Stress Relieving, Vacuum Brazing, Induction Hardening • Heat Treating Equipment – Furnace, Pyrometry, Instrumentation, Atmospheric Control System • Brazing

TASK GROUP VOTING MEMBERS Subscriber Voting Members Pedro Aranda Eaton, Aerospace Group UVM

Melissa Facas Pratt & Whitney UVM

Serge Labbé Héroux Devtek Inc. ALT/UVM

Thomas Ruglic Bell Helicopter UVM

Carolyn Backus The Boeing Company ALT/UVM

Robert Faticanti Textron Systems UVM

Marc-André Lefebvre Héroux Devtek Inc. UVM

Simon Scott BAE Systems (MAI) ALT/UVM

Arie Ben Dov Israel Aerospace Industries UVM

Laurent Geerts SONACA UVM

Stefan Lemberger Airbus Helicopters ALT/UVM

Gary Sigmon 309th Maintenance Wing-Hill AFB UVM

Tawny Blumenshine Cessna Aircraft Company UVM

Cristina Gonzalez-Perez Airbus Defence And Space UVM

Hongping Li COMAC ALT/UVM

Shaun Brewin Rolls-Royce ALT/UVM

Peter Hammarbo GKN Aerospace Sweden AB UVM

Weitao Ma COMAC UVM

Bruce Brownfield Lockheed Martin Corp. SEC/UVM

Gerald Harvey Triumph Group, Inc. UVM

William Macias Goodrich (UTAS) ALT/UVM

Frank Brungs MTU Aero Engines AG UVM

Wayne Hillstead 309th Maintenance Wing-Hill AFB ALT/UVM

Doug Matson The Boeing Company UVM

Craig Clasper Spirit AeroSystems UVM Cedric Colas SAFRAN Group ALT/UVM Michael Corsino Hamilton Sundstrand (UTAS) UVM Bernd Daniels MTU Aero Engines AG ALT/UVM Martin Day Honeywell Aerospace UVM Peter Edwards Airbus ALT/UVM Andreas Elbs Liebherr-Aerospace SAS UVM Mark Emerson Rolls-Royce UVM Sergio Esposito Alenia Aermacchi S.p.A UVM

John Merritt Sikorsky Aircraft UVM

Linnie Hook Cessna Aircraft Company ALT/UVM

Alessandro Miglio AgustaWestland ALT/UVM

Andrew Hopkins BAE Systems (MAI) UVM

Mariusz Stanczyk Lockheed Martin Corporation ALT/UVM William Stewart Bombardier Inc. UVM Marc Taillandier Airbus Helicopters UVM Jeff Thyssen GE Aviation UVM Louis Tremblay Bombardier Inc. ALT/UVM Cyril Vernault SAFRAN Group VCH/UVM

Billy Hulse Spirit AeroSystems Inc ALT/UVM

Thomas Norris Goodrich (UTAS) (Chair- October 2012) +1 858-436-5443

Doug Webb Honeywell Aerospace ALT/ UVM

David Isenberg Parker Aerospace Group UVM

Eddy Pham Northrop Grumman Corporation UVM

Tom Wilson Bombardier Inc. ALT/UVM

Kent Johnson 309th Maintenance Wing-Hill AFB ALT/UVM

Fabrizio Quadrini AgustaWestland UVM

Grzegorz Wryk Rolls-Royce (AEC) ALT/UVM

Sunder Rajan Raytheon Co UVM

Ji Yuan COMAC ALT/UVM

Chris Reilly Hamilton Sundstrand (UTAS) ALT/UVM

HEAT TREATING continued on next page

Stephen Johnson Triumph Group, inc. ALT/UVM Karen Kim Sikorsky Aircraft ALT/UVM

Alex Richez Airbus UVM

Jeff Koss The Boeing Company ALT/UVM

28

HEAT TREATING (HT) (Jerry Aston + 44 133 286 9273, [email protected]) (Marcel Cuperman +1 412 367 2547, [email protected]) (Rob Hoeth +1 724 772 8657, [email protected]) (Stan Revers + 44 133 286 9271, [email protected]) TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Griff Braddock Braddock Metallurgical Inc SVM

Jeremy Leetz MMS Thermal Processing SVM

Kevin Seidel Universal Stainless SVM

Michael Brandt Alcoa Inc. SVM

Richard Lewis PCC Structurals – Carson City SVM

Stuart Sherman Metallurgical Processing Inc. ALT/SVM

Robert Cvetichan Paulo Products Company (American Brazing Division) SVM

Johanna Lisa Continental Heat Treating / Quality Heat Treating SVM

Dave Shonts Metal Finishing Company Inc. SVM

Edward Engelhard Solar Atmospheres, Inc. SVM

Iain Mackenzie Bodycote Heat Treatments (UK) ALT/SVM

Dennis Fried Carpenter Technology SVM

Amir Mendelovich TechJet Airfoils Ltd SVM

Alexander Klyuch Blades Technology Ltd SVM

Michael Niedzinski Constellium France SVM

John Kunkle Howmet Castings & Services, Inc. Dover Casting (AHDC) SVM

Timothy Paradis Metallurgical Processing Inc. SVM Bill Rogers Alcoa – ZAO “AMR” SVM

29

Jeffrey Sipf Haynes International SVM Wilfried Weber PFW Aerospace GmbH SVM Nicholas Wood Firth Rixson Forgings Limited SVM Tom Valenti Specialty Steel Treating SVM

MATERIALS TESTING LABORATORIES (MTL) (Kevin Wetzel, +1 724 772 8652, [email protected]) (Jim Lewis +1 724 772 8688, [email protected]) (Rob Hoeth +1 724 772 8657, [email protected]) (Robert Lizewski, +1 724 772 8681, [email protected]) This task group has published the checklists (AC7101, AC7101/1-9, AC7101/11, & AC7006) for Materials Testing Laboratories. Types of activities being accredited: • • •

ISO/IEC 17025 Requirements Chemical Testing Mechanical Testing

• • •

Metallography (Micro & Macro) Hardness Corrosion

• • •

Microhardness DTA Test Specimen Preparation

TASK GROUP VOTING MEMBERS Subscriber Voting Members David Bale Pratt & Whitney UVM

Colin Fletcher Bell Helicopter Textron UVM

Pietro Bonarrigo Bombardier Inc. UVM

Dan Graves Goodrich (UTAS) ALT/UVM

Philippe Brailly SAFRAN Group ALT/UVM

Jim Hartman Honeywell Aerospace ALT/UVM

Thomas Brendel MTU Aero Engines AG ALT/UVM

Stuart Hunt Airbus ALT/UVM

Ben Clark Eaton, Aerospace Group UVM

John Knie The Boeing Company ALT/UVM

Linda Cook Rolls-Royce ALT/UVM

Jeff Koss The Boeing Company ALT/UVM

George Coste SAFRAN Group UVM

Frank Lennert The Boeing Company UVM

Doug Deaton GE Aviation UVM

Muriel Malhomme Airbus UVM

George Doviak Goodrich (UTAS) UVM

Patricia Matkowski The Boeing Company ALT/UVM

Kevin Elston Spirit AeroSystems UVM

Jennifer McKeegan Cessna Aircraft Company UVM

Tim Myers Honeywell Aerospace CHR/UVM (Chair – October 2011) +1 602 284 5637 [email protected] Amanda Rickman Raytheon Co. VCH/UVM Lindsay Schurle Spirit Aerosystems ALT/UVM Christian Schwaminger MTU Aero Engines AG UVM Armen Talverdian The Boeing Company ALT/UVM Gary Winters Northrop Grumman Corporation UVM MATERIALS TESTING LABORATORIES continued on next page

Olivier Molinas Airbus Helicopters UVM

30

MATERIALS TESTING LABORATORIES (MTL) (Kevin Wetzel, +1 724 772 8652, [email protected]) (Jim Lewis +1 724 772 8688, [email protected]) (Rob Hoeth +1 724 772 8657, [email protected]) (Robert Lizewski, +1 724 772 8681, [email protected]) TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Siobhan Alekna SPS Technologies SVM

Robert Haldane Alcoa, Inc. SVM

Pierre-Emmanuel Richy Aubert & Duval SVM

Frank Anderson Lucideon M+P ALT/SVM

Bryan Hall NSL Analytical Services Inc. SVM

James D. Rossi Westmoreland Testing SVM

Pedro Astola-Gonzalez Titania, Ensayos y Proyectos Industriales S.L. SVM

Kevin Hineman ATI Allegheny Ludlum SVM

Peter Scrimshire Special Metals Wiggin Ltd. – IncoTest SVM

Don Huffman Lisi Aerospace SVM

Dave Serbousek Olympic Scientific, Inc. SVM

Steven Keck Carpenter Technology Corp. ALT/SVM

Byron Skillings ATI Ladish Forging SVM

David Luoni Element Materials Technology SVM

Shirley Strickland Lucideon M+P SVM

Rick Kuhns Bristol Industries SVM

T. Rao Tipirneni Long Island Testing Labs. Inc. SVM

Annette O’Connell Haynes International Inc. SVM

Simon Tournebize Aubert & Duval ALT/SVM

Bob Olevson Element Materials Technology ALT/SVM

Jeff Viney Metcut Research Associates, Inc. SVM

Jacob Padrul Constellium France SVM

Kevin VonScio Perryman Company SVM

Frank Peszka Laboratory Testing Inc. SVM

Donna Warner Heartland Precision Fasteners SVM

Ben Ransom RTI Int’l Metals, Inc. Tradco, Inc. SVM

Margaret Willis ATI Specialty Materials Monroe Operations SVM

Corwyn Berger Exova, Inc. SVM Philip Bretz Metcut Research Associates, Inc. ALT/SVM Massimo Capriolo Bytest SRL SVM Eric Chabault Bureau Veritas Laboratories SVM Matthew Chamberlain-Webber Timet UK Limited SVM John Chir Latrobe Specialty Steel SVM Deena Crossmore IMR Test Labs SVM Kay Fisher Bohler Edelstahl GmbH & Co KG SVM Stephan Greimers Outokumpu VDM GmbH SVM Brian Griffin Howmet Research Corp. SVM

Douglas Reed Special Metals Corp. SVM

31

Jason Wright Atlas Testing Laboratories SVM

MEASUREMENT & INSPECTION (M&I) (James Bennett +1 724 772 8651, [email protected]) The Measurement & Inspection Task Group is conducting audits to demonstrate compliance to PRI AC7130 checklists. These audits address the Nadcap requirements for the following processes: • •

AC7130/1 CMM – Coordinate Measuring Machines AC7130/5 Mass Airflow Measurement of Turbine Engine Parts TASK GROUP VOTING MEMBERS

Subscriber Voting Members Randall Becker The Boeing Company ALT/UVM

Cristina Gonzalez-Perez Airbus Defence And Space UVM

James Mansell Rolls-Royce ALT/UVM

Al Berger GE Aviation UVM

Benoît Gottié SAFRAN Group ALT/UVM

Graeme Rankin Spirit AeroSystems UVM

Ronan Cauchy Airbus UVM

Simon Gough-Rundle Rolls-Royce CHR/UVM

Mark Rechtsteiner GE Aviation ALT/UVM

Lance Christie Sikorsky Aircraft UVM Mark Clark The Boeing Company ALT/UVM Chris Davison Spirit AeroSystems ALT/UVM Greg Goldhagen Hamilton Sundstrand (UTAS) UVM

(Chair- June 2013) +44 1332 291936

Norman Gross The Boeing Company VCH/UVM Jacques Kerault Airbus ALT/UVM

Steve Row Goodrich (UTAS) UVM Andrew Smith Spirit AeroSystems ALT/UVM Darren Yochum Rolls-Royce ALT/UVM

Cyril Lerebours SAFRAN Group UVM

Supplier Voting Members Takahito Araki IHI Corporation SVM

Andrew Dunbabin Doncasters Chard SVM

Lee Parsley Click Bond, Inc. SVM

Juston Bartlett Hunting Dearborn, Inc. SVM

Dave Eshleman The Young Engineers, Inc. SVM

Tammi Schubert LMI Finishing, Inc, SVM

Gordon Cameron LMI Aerospace ALT/SVM

Lisa Leonard National Physical Laboratory SVM

Gail Shepheard Doncasters Chard ALT/UVM

Owe Carlsson Alcoa Fastening Systems SVM

Dave Michaud Fountain Plating Co. SVM

32

NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT (NMSE) (Brian Manty +1 727-480-5180, [email protected]) The Nonconventional Machining and Surface Enhancement (NMSE) Task Group is conducting audits to demonstrate compliance to the AC7116 series of checklists for nonconventional machining and the AC7117 checklist for surface enhancement. These audits address the following types of processes: Nonconventional Machining • Electrochemical Machining • Electrochemical Grinding

•

•

Electrical Discharge Machining – Fast Hole, Sinker, Wire, EC Drilling Laser Beam Machining – Cutting, Drilling

TASK GROUP VOTING MEMBERS Nonconventional Machining Sub-Task Group Subscriber Voting Members Ken Abram Honeywell Aerospace ALT/UVM

Dan Loveless Parker Aerospace UVM

Holger Polanetzki MTU Aero Engines AG ALT/UVM

Tomohiko Ashkaga Mitsubishi Heavy Industries Ltd UVM

David McCallister UTC/Pratt & Whitney SEC/UVM

Jeffery Robb Cessna Aircraft Co. UVM

Zeljko Calija Goodrich (UTAS) UVM

Steven Meyer Spirit AeroSystems, Inc. UVM

Mike Schmidt GE Aviation ALT/UVM

Caroline Des Landes Bombardier, Inc. UVM

Gudrun Muehlbauer MTU Aero Engines AG UVM

Nouman Usmani GE Aviation UVM

Vincenzo DeRosa Alenia Aermacchi S.p.A. UVM

Jeremy Phillips Cessna Aircraft Co. ALT/UVM

Donald Williams GE Aviation ALT/UVM

Peter Edwards Airbus ALT/UVM

Alex Pohoata Honeywell Aerospace CHR/UVM (Chair – January 2013) +1 602 799 7546

Paul Woolley Rolls-Royce VCH/UVM

Simon Long Airbus UVM

Supplier Voting Members Jeffrey Kupis Micro-Tronics, Inc. SVM

Tim Scarlett Danville Metal Stamping Co., Inc. SVM

33

Evren Yuksekkaya GE Aviation ALT/UVM

Gigi Streeter Barnes Aerospace SVM NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT continued on next page

NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT (NMSE) (Brian Manty +1 727-480-5180, [email protected]) TASK GROUP VOTING MEMBERS CONTINUED Surface Enhancement Sub-Task Group Surface Enhancement • Automated Peening • Computer Controlled Peening • Flapper Peening

• •

Manual Peening Peen Forming

Subscriber Voting Members Ken Abram Honeywell Aerospace ALT/UVM

Glen Heide The Boeing Company ALT/UVM

John Pfeiffer GE Aviation ALT/UVM

Michael Steele The Boeing Company ALT/UVM

Tomohiko Ashikaga Mitsubishi Heavy Industries Ltd UVM

Serge Labbé Héroux Devtek ALT/UVM

Jeremy Phillips Cessna Aircraft Co. ALT/UVM

Greg Syvertson Bell Helicopter Textron UVM

Marc-André Lefebvre Héroux Devtek Inc. UVM

Alex Pohoata Honeywell Aerospace CHR/UVM (Chair – January 2013) +1 602 231 4134

Donald Williams GE Aviation ALT/UVM

Zeljko Calija Goodrich (UTAS) UVM Alessio Colombara AgustaWestland S.p.A. ALT/UVM Caroline Des Landes Bombardier, Inc. UVM Vincenzo DeRosa Alenia Aermacchi S.p.A. UVM Peter Edwards Airbus ALT/UVM Cristina Gonzalez-Perez Airbus Defence And Space UVM

Simon Long Airbus UVM

Holger Polanetzki MTU Aero Engines AG ALT/UVM

Dan Loveless Parker Aerospace UVM

K. T. Quader The Boeing Company UVM

David McCallister UTC/Pratt & Whitney SEC/UVM

Paul Woolley Rolls-Royce VCH/UVM Evren Yuksekkaya GE Aviation ALT/UVM

Fabrizio Quadrini AgustaWestland S.p.A. UVM

Steven Meyer Spirit AeroSystems, Inc. UVM

Jeffery Robb Cessna Aircraft Co. UVM

Gudrun Muehlbauer MTU Aero Engines AG UVM

Mike Schmidt GE Aviation UVM

Supplier Voting Members Steve Connally Curtiss Wright Surface Technologies SVM

Alexander Klyuch Blades Technology Ltd. SVM

Dawn Stokes PTI Industries Inc. SVM

Dave Jones 3P Processing, Inc. SVM

34

Yoshiomi Sukesada Asahi Kinzoku Kogyo Inc. SVM

NONDESTRUCTIVE TESTING (NDT) (Mark Aubele, +1 724 772 8654, [email protected]) (Jim Bennett, +1 724 772 8651, [email protected]) (Phil Ford, +44 (0) 1443 225545 [email protected]) (Mike Gutridge, +1 740 587 9841, [email protected]) (Andy Statham +44 (0) 133 286 9276, [email protected]) (David Marcyjanik, +1 724 772 7113, [email protected]) The Nondestructive Testing Task Group is currently reviewing audit reports and making recommendations to Nadcap Council on accreditation for the following tests: • Magnetic Particle • Ultrasonic • Eddy Current • Liquid Penetrant • Radiography • Digital Radiography, Digital Detector Array • Ultrasonic Survey-Rotating Components • Computed Radiology

TASK GROUP VOTING MEMBERS Subscriber Voting Members Steve McCool Honeywell Aerospace South Bend – ALT/UVM Phoenix - ALT/UVM

Terho Sulkupuro GKN Aerospace Sweden AB UVM

Charles Alvarez Goodrich (UTAS) ALT/UVM

Jim Fowler Pratt & Whitney ALT/UVM

Steve Bauer Northrop Grumman Corp. UVM

Steven Garner Eaton, Aerospace Group UVM

Philippe Beck Airbus Helicopters UVM

Frederic Girard Pratt & Whitney Canada UVM

Mitch Birzer Gulfstream Aerospace UVM

Jim Graves Rolls-Royce ALT/UVM

Alain Bouchet SAFRAN Group UVM

Luis Grijalva Lockheed Martin Corporation UVM

Juergen Burchards MTU Aero Engines AG UVM

Thomas Mike Guinn Bell Helicopter Textron ALT/UVM

Fangmei Chu Honeywell Aerospace Phoenix – ALT/UVM

Harry Hahn GE Aviation UVM

Antonio Cilberto Alenia Aermacchi S.p.A UVM

Robert Hogan Honeywell Aerospace Phoenix UVM

Robert Rainone Goodrich (UTAS) ALT/UVM

Ed Hohman Bell Helicopter Textron UVM

Robert Reynolds The Boeing Company - BDS ALT/UVM

Scott Iby Hamilton Sundstrand (UTAS) ALT/UVM

David N. Royce Pratt & Whitney VCH/UVM

Dr. Hans-Hermann Kopp MTU Aero Engines AG ALT/UVM

Victor Schonberger Israel Aerospace Industries ALT/UVM

Serge Labbé Héroux Devtek Inc ALT/UVM

Bobby Scott Bombardier, Inc. CHR/UVM (Chair – October 2012)

Jinqiu Zhou Comac UVM

Uri Sol Israel Aerospace Industries UVM

NONDESTRUCTIVE TESTING continued on next page

Mike Clark Sikorsky Aircraft UVM Massimo Colombo Ge Avio S.r.l. UVM Richard Costantino Goodrich (UTAS) UVM Michael Daehling Cessna Aircraft Company ALT/UVM Timothy Doane 309th Maintenance Wing – Hill AFB UVM Chris Dootson BAE Systems – Military & Air Information (MAI) UVM

Luigi Merletti AgustaWestland UVM Michael Mitchell Hamilton Sundstrand (UTAS) UVM Dale Norwood Parker Aerospace Group UVM Scott O’Connor Honeywell Aerospace ALT/UVM Gary O’Neill Parker Aerospace Group ALT/UVM Justin Payne Cessna Aircraft Company UVM

Marc-André Lefebvre Héroux Devtek Inc ALT/UVM Donald MacLean Raytheon Co UVM

Christopher Stevenson Rolls-Royce UVM

35

D. Scott Sullivan Honeywell Aerospace – Tempe – ALT/UVM Phoenix - ALT/UVM Pat Thompson Honeywell Aerospace – Torrance – ALT/UVM Phoenix - ALT/UVM Dominique Tomasso SAFRAN Group ALT/UVM Walter Tonizzo Héroux Devtek Inc UVM Peter Torelli The Boeing Company UVM Louis Truckley The Boeing Company ALT/UVM Tony Warren Airbus SEC/UVM Alun Williams Airbus ALT/UVM Jim Winter Spirit Aerosystems UVM Sean Wood Triumph Group UVM

NONDESTRUCTIVE TESTING (NDT) (Mark Aubele, +1 724 772 8654, [email protected]) (Jim Bennett, +1 724 772 8651, [email protected]) (Phil Ford, +44 (0) 1443 225545, [email protected]) (Mike Gutridge, +1 740 587 9841, [email protected]) (Andy Statham +44 (0) 133 286 9276, [email protected]) (David Marcyjanik, +1 724 772 7113, [email protected]) TASK GROUP VOTING MEMBERS CONTINUED

Supplier Voting Members Mike Airey Robert Stuart Ltd. SVM

Dwayne Cooper Wyman Gordon ALT/SVM

Christopher Andersen PCC Structurals Inc. LPC SVM

Nathalie Crozat-Vigier SKF Aerospace France SVM

Mike Ashton Hexcel Corporation SVM Andy Bakewell E. M. Inspection Co Ltd SVM Shawn Ballou Wyman SVM Douglas Barra X-R-I Testing/Integrity Aerospace ALT/SVM Martyn Bills Exova (UK) Limited ALT/SVM Lee Bruce Robert Stuart Ltd. ALT/SVM N. David Campbell West Penn Testing Group SVM Massimo Capriolo BYTEST SRL SVM Claude Chambon Aubert & Duval SVM

Richard King New Hampshire Ball Bearings Inc. SVM

Robert Custer AAA Plating & Inspection, Inc. SVM Douglas Davies Alcoa Fastening Systems SVM Paul Evans James Fisher NDT SVM Richard Gasset LISI Aerospace Torrance SVM David Gray Mitchell Laboratories Inc SVM

Josef Maier Bohler Edelstahl GmbH & Co KG SVM

Cindy Roth TEAM Industrial Services TCM DivisionCincinnati SVM

John Massie Paradigm Precision SVM

Frank Saenz Hi-Tech Metal Finishing ALT/SVM

William McKessy Alcoa Howmet SVM

Guy Saenz Hi-Tech Metal Finishing SVM

David Mitchell Composite Inspection Solutions SVM

Michael Steele Northstar Aerospace Chicago Inc. SVM

Julie Nguyen Element Materials Technology SVM

Gary White Orbit Industries Inc SVM

Blair James O’Connell Precision Castparts Corp SVM

Robert Henchar Integrity Aerospace Group SVM

Patrick O’Leary Nu-Pro Limited SVM

Helmuth Hoeller FACC SVM

Mark Pennington Firth Rixson Forgings Ltd. ALT/SVM

Paul Johnson Firth Rixson Forgings Ltd. SVM

Mark Pompe West Penn Testing Group ALT/SVM

Jeff Jones Alloy Processing Inc PCC Aerostructures SVM

Jonathan Pugh Exova (UK) Limited SVM

36

Steve Radelich Jorgensen Forge SVM

NON METALLIC MATERIALS MANUFACTURING (NMMM) (John Tibma +1 724 772-7148, [email protected]) The Non Metallic Materials Manufacturing Task Group is conducting audits to demonstrate compliance to the PRI AC7124. These audits address the Nadcap requirements for the following processes: •

•

Resin Manufacturing

Prepeg Manufacturing

•

Adhesive Manufacturing

TASK GROUP VOTING MEMBERS Subscriber Voting Members Monica Alcala Honeywell Aerospace ALT/UVM

Joe Dwyer Rolls-Royce ALT/UVM

Betty Kocsis Honeywell Aerospace UVM

Alberto Portal Airbus Defence And Space UVM

Peter Atwell Airbus SEC/UVM

Achim Enzmann Airbus Helicopters UVM

Frank Lennert The Boeing Company ALT/UVM

Elliott Schulte Bell Helicopter ALT/UVM

Michael Bemis Goodrich (UTAS) UVM

Olivier Goupillon Airbus Helicopters ALT/UVM

Lance Loeks The Boeing Company UVM

Sally Spindor Triumph Group Inc. ALT/UVM

Laura Benedetti SAFRAN Group UVM

Steve Grunshaw BAE Systems-Military Air & Information (MAI) ALT/UVM

Muriel Malhomme Airbus ALT/UVM

Anne Stanley Bombardier Inc. UVM

Leah Markowitz Honeywell Aerospace ALT/UVM

Colin Stuart Rolls-Royce UVM

Andreas Mastorakis GE Aviation UVM

Justin Walker Spirit AeroSystems ALT/UVM

Keith Panuska Lockheed Martin Corporation VCH/UVM

Yuhui Yuan COMAC ALT/UVM

Ping Chen COMAC UVM David Constable Airbus ALT/UVM Joseph DeVirgilio The Boeing Company ALT/UVM Kevin Dowling Spirit AeroSystems UVM Patrick Dunleavy SAFRAN Group ALT/UVM

Brett Hemingway BAE Systems-Military & Air Information (MAI) UVM Mark Jackson Triumph Group Inc. UVM Evelyn Jacobson Pratt & Whitney UVM

Jeremy Phillips Cessna Aircraft Company UVM

John Key Jr. Bell Helicopter CHR/UVM (Chair – October 2012)

Supplier Voting Members Frank Alberto Park Aerospace Technologies Corp. SVM

Jim Brown Hexcel Corporation SVM

Natalia Becerra Pozo Exova (UK) Limited SVM

Douglas Jacques Renegade Materials Corporation SVM

Jay Berndt Toray Composites America Inc ALT/SVM

Rick Price Park Aerospace Technologies Corp ALT/SVM

Don Russell Toray Composites America Inc ALT/SVM Colleen Saunders Toray Composites America Inc SVM Steve Schrameyer Cytec Engineered Materials SVM

37

Vitorio Stana Avcorp Industries Inc. SVM Arno Toelkes Euro-Composites SVM Nancy Vancil Toray Carbon Fibers America Inc. SVM

NON METALLIC MATERIALS TESTING (NMMT) (John Tibma +1 724 772-7148, [email protected]) The Non Metallic Materials Testing Task Group is conducting audits to demonstrate compliance to the PRI AC7122-I for Independent Testing Laboratories, PRI AC7122-P for Part Manufacturers Captive Laboratories and PRI AC7122-R for Raw Materials Manufacturers Captive Laboratories. These audits address the Nadcap requirements for the testing of Class A: Composites and Class B: Adhesive/Adhesive Primer • •

• •

Mechanical Testing Physical Testing

Chemical Testing Thermal Testing

•

Flammability Testing

TASK GROUP VOTING MEMBERS Subscriber Voting Members Monica Alcala Honeywell Aerospace ALT/UVM

Patrick Dunleavy SAFRAN Group ALT/UVM

Peter Atwell Airbus SEC/UVM

Joe Dwyer Rolls-Royce ALT/UVM

Michael Bemis Goodrich (UTAS) UVM

Achim Enzmann Airbus Helicopters UVM

Laura Benedetti SAFRAN Group UVM

Olivier Goupillon Airbus Helicopters ALT/UVM

Peter Bonarrigo Bombardier Inc. ALT/UVM

Steve Grunshaw BAE Systems-Military & Air Information (MAI) ALT/UVM

Ping Chen COMAC UVM David Constable Airbus ALT/UVM Joseph DeVirgilio The Boeing Company ALT/UVM Kevin Dowling Spirit AeroSystems UVM

John Key Jr. Bell Helicopter CHR/UVM (Chair – October 2012) Betty Kocsis Honeywell Aerospace UVM Frank Lennert The Boeing Company ALT/UVM Lance Loeks The Boeing Company UVM Muriel Malhomme Airbus ALT/UVM

Brett Hemingway BAE Systems-Military & Air Information (MAI) UVM

Leah Markowitz Honeywell Aerospace ALT/UVM Andreas Mastorakis GE Aviation UVM

Mark Jackson Triumph Group Inc. UVM Evelyn Jacobson Pratt & Whitney UVM

Larry Olsen Northrop Grumman Corporation UVM

Jim Brown Hexcel Corporation SVM

Don Russell Toray Composites ALT/SVM

William DeLaurier IMR Test Labs SVM

Colleen Saunders Toray Composites SVM

Douglas Jacques Renegade Materials Corporation SVM

Steve Schrameyer Cytec Engineered Materials SVM

Keith Panuska Lockheed Martin Corporation VCH/UVM Jeremy Phillips Cessna Aircraft Company UVM Alberto Portal Airbus Defence And Space UVM Elliott Schulte Bell Helicopter ALT/UVM Sally Spindor Triumph Group Inc. ALT/UVM Anne Stanley Bombardier Inc. UVM Colin Stuart Rolls-Royce UVM Justin Walker Spirit AeroSystems ALT/UVM Yuhui Yuan COMAC ALT/UVM

Supplier Voting Members Frank Alberto Park Aerospace Technologies Corp. SVM Pedro Astola Gonzalez TITANIA, Ensayos y Proyectos Industriales SVM Natalia Becerra Pozo Exova (UK) Limited SVM Paul Braun Cincinnati Testing Labs SVM

Vitorio Stana Avcorp Industries Inc. SVM

Dennis Kidd Cincinnati Testing Labs Inc. ALT/SVM

Nancy Vancil Toray Carbon Fibers America Inc. SVM

Rick Price Park Aerospace Technologies Corp ALT/SVM

38

Nicolas Vetel Critt-Materiaux MPC SVM

SEALANTS (SLT) (Keith Purnell +1 724 772 8685, [email protected]) The Nadcap Sealants program consists of two types of audits: (1) Sealant Manufacturers: AC7200/1 - on-site inspection of aerospace sealant manufacturers (2) Value-Added Sealant Distributors: AC7202 Testing and fabrication techniques included in the audit criteria: • • •

• • •

Two-Part Polysulfide Sealants Silicones and Fluorosilicones Polyurethanes

Adhesion Promoters Coatings and Coating Processes Peel Panels, Shear Specimens, Tensile Bars

TASK GROUP VOTING MEMBERS Subscriber Voting Members Jerry Brown Lockheed Martin Corp. ALT/UVM

Aleck Featherston Bell Helicopter Textron UVM

Angelina Mendoza Goodrich (UTAS) ALT/UVM

Brent Clothier Cessna Aircraft Company VCH/UVM

Jeffrey Kingsley Air Force UVM/GVT

Raj Nagarajan General Dynamics Corp. UVM

Kent DeFranco Lockheed Martin Corp. CHR/UVM (Chair – December 2011)

Diane Kleinschmidt NAVAIR UVM/GVT

Estrella Watson Goodrich (UTAS) SEC/UVM

Melissa Facas Pratt & Whitney UVM

Supplier Voting Members Jim Carney NSL Aerospace SVM Suzanna DeMoss 3M Company Aerospace and Aircraft Maintenance Department SVM Derek Hughes PPG Aerospace PRC DeSoto ALT/SVM John Lane Integral Products Inc. SVM

Manuel Koucouthakis Honeywell Aerodapce UVM

Josh Mazin Flamemaster Corp ALT/SVM David Nickerson Packaging Systems Inc. SVM Philip Shackley PPG Aerospace/PRC DeSoto Intl. SVM Linda Smith Flamemaster Corporation SVM

39

Jeff Steele D Aircraft Products Inc. SVM Randy Wilt Graco Supply Company SVM Jonathan Zook 3M Company Aerospace and Aircraft Maintenance Department ALT/SVM

WELDING (WLD) (Ian Simpson +44 1332 869272, [email protected]) (Mike Gutridge +1 740 587 9841, [email protected]) (Stan Revers +44 1332 869271, [email protected]) Process specific requirements have been developed by the Welding Task Group and are contained in the AC7110 series of checklists. Welding processes covered include: • • • •

Diffusion Welding Electron Beam Welding Flash Welding Friction/Inertia Welding

• • • •

Fusion Welding Laser Welding Percussion Stud Welding Resistance Welding

• •

•

Torch/Induction Brazing Welder/Welding Operator Qualification Evaluation of Welds

TASK GROUP VOTING MEMBERS Subscriber Voting Members Robbie Adams Honeywell Aerospace ALT/UVM

Milan Hanyk Honeywell Aerospace UVM

Holger Krueger Airbus VCH/UVM

Marco Luigi Poletto Alenia Aermacchi SpA UVM

Osawonuyi Agbonkonkon Parker Hannifin Corp ALT/UVM

Les Hellemann GE Aviation ALT/UVM/ALT/SEC

Peter Lang Pratt & Whitney ALT/UVM

Earl Pruett Lockheed Martin Corp UVM

Gary Coleman The Boeing Company ALT/UVM

Valere Henry SAFRAN Group UVM

Mario Leclerc Bombardier Inc. UVM

Brian Ricks Raytheon Company ALT/UVM

Caroline DesLandes Bombardier Inc ALT/UVM

Tommy Howland Spirit Aerosystems ALT/UVM

Donald Lenhart Spirit AeroSystems Inc UVM

Paul Slater Rockwell Collins Inc MBR

Andrew Dewhurst BAE Systems Military Air & Information (MAI) ALT/UVM

Scott Iby Hamilton Sundstrand (UTAS) ALT/UVM

Dag Lindland Pratt & Whitney UVM

Tim Storm Parker Hannifin Corp UVM

Michael Irvin The Boeing Company UVM

Scott Maitland Goodrich (UTAS) UVM

David Struckman Eaton, Aerospace Group UVM

Jerry Isoaho GKN Aerospace Sweden AB UVM

Joel Mohnacky UTC Aerospace (Hamilton Sundstrand) UVM

Steve Tooley Rolls-Royce CHR/UVM (Chair – July 2014)

Lyle Morris Raytheon Company UVM

Gerhard Westenrieder MTU Aero Engines AG ALT/UVM

Rick Peterson Rockwell Collins Inc MBR

Gary Winters Northrop Grumman Corp ALT/UVM

Chris English GE Aviation SEC/UVM William Fitzgerald Northrop Grumman Corp. UVM Bob Fletcher BAE Systems Military Air & Information (MAI) UVM Stephen Geldart Eaton Aerospace ALT/UVM Larry Hamanishi The Boeing Company ALT/UVM

Günther Jakobi Rolls-Royce ALT/UVM Hugh Jamison Bombardier inc ALT/UVM Ralph Kropp MTU Aero Engines AG UVM

Jeremy Phillips Cessna Aircraft Company ALT/UVM

Supplier Voting Members James Ahlemeyer Ducommun AeroStructures SVM

Angelo Monzo Barnes Aerospace ALT/SVM

Mike Schleckman Voss Industries Inc SVM

Christopher Kielb Advance Welding SVM

James A. Olejarczyk Alcoa Power and Propolsion SVM

Jackie Sternot PAKO, Inc. SVM

Melinda Mitton Advance Welding ALT/SVM

David Osenar PAKO, Inc. ALT/SVM

Gigi Streeter Barnes Aerospace SVM

40

Christopher Webb PCC Structurals Inc. SVM

E-mail Addresses and Telephone Extensions for PRI Staff (Performance Review Institute - USA +1 724.772.1616) (Performance Review Institute - Europe +44.870.350.5011) (Performance Review Institute - China +86.10.6461.9807) (Performance Review Institute - Japan + 81.568.35.3520) Adrian, Deb Aston, Jerry Aubele, Mark Ayres, Jamie Benkart, Joyce Bennett, James Bonar, Amanda Brock, Samantha Burkholder, Scott Calvert, Will Conroy, Karen Cook, Nigel Coyne, Danyel Cuperman, Marcel DiMatteo, Cindi Eckels, Jennifer Ford, Phil Frailey, Susan Garland, Savannah Godfrey, Hannah Gondek, Rebekah Graham, Mike

Grubbs, Wendy Gutridge, Mike Hess, Connie Hill, Joe Hill, Paula Hoeth, Rob Ippolito, Lisa Jingyu, Tang (Riki) Joliffe, Claire Joseph, Rhonda Kegerreis, E. J. Klavon, Scott Kornrumpf, Jennifer Kosis, Susan Kucan, Pete Kurtyka, Crystal Le, Liu Leigh, Joanna Lewis, Jim Lizewski, Robert Logan, Phylis Lownes, Alec Manty, Brian

Scheduler Associate Program Manager - Heat Treating Senior Program Manager - AQS, Electronics, Measurement & Inspection and NDT Scheduler CSR – Chemical Processing Senior Staff Engineer – NDT, Measurement & Inspection European Support Coordinator Registrar Process Coordinator Sales Engineer Senior Staff Engineer - Chemical Processing Manager, Human Resources and Administration Lead Staff Engineer - Chemical Processing Registrar Sales & Marketing Support Coordinator Senior Staff Engineer - Heat Treating Accounting Manager Coordinator, Nadcap Auditor Staffing Staff Engineer – NDT & ETG Staff Engineer – AQS & ETG CSR – Conventional Machining as a Special Process, Composites/NMMM/NMMT, Electronics and M&I Senior Specialist - Professional Development Program, Europe Manager – Nadcap Quality and NUCAP Sr. Program Manager - Chemical Processing, Composites, Conventional Machining as a Special Process, Nonconventional Machining and Surface Enhancement QPL Development Coordinator Lead Senior Staff Engineer - NDT, AQS and Welding Manager, Support Services and Customer RelationsAmericas Registrar Production Planning and Control Specialist Office Manager & HR Coordinator – Europe Staff Engineer - Heat Treating and Materials Testing Laboratories Manager, Purchasing, Facilities & Travel Management Nadcap China Coordinator European Nadcap Support Coordinator Professional Development eQuaLified Coordinator Director, Registrar Sales and Marketing Director, Nadcap Program and Aerospace Operations Senior CSR - Coatings, Materials Testing Laboratories, and NMSE Cost Accountant Director, Registrar Operations Professional Development Coordinator – eQuaLearn Manager, PRI Asia/Pacific Manager, Communications and European Customer Relations Program Manager - Coatings, Elastomer Seals, Fluids, Materials Testing Laboratories, Sealants and QPL Staff Engineer - Chemical Processing, Coatings and Materials Testing Laboratories Registrar Process Specialist Software Developer Interim Staff Engineer, Nonconventional Machining and Surface Enhancement

41

+1.724.772.8653 +44.133.286.9273 +1.724.7728654

[email protected] [email protected] [email protected]

+1.724.772.8582 +1.724.772.8643 +1.724.772.8651 +44.870.350.5011 +1.724.772.8664 +1.724.772.8667 +1.724.772.8524 +1.724.772.7171 +44.133.286.9274 +1.724.772.8683 +1.412.367.2547 +1.724.772.8668 +1.724.772.8579 +44.1443.225.545 +1.618.615.4478 +1.724.772.8642

[email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected]

+44.870.350.5011

[email protected]

+1.724.772.7116 +1.724.772.8646

[email protected] [email protected]

+1.724.772.8647 +1.740.587.9841 +1.724.772.8660

[email protected] [email protected] [email protected]

+1.724.772.8691 +44.870.350.5011 +1.724.772.8657

[email protected] [email protected] [email protected]

+1.724.772.4093 +86.10.6461.9807 +44.870.350.5011 +1.724.772.8644 +1.724.772.4094 +1.724.772.7111 +1.724.772.8680

[email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected]

+1.724.772.8650 +1.724.772.7170 +1.724.772.8537 +86.10.6461.9807 +44.870.350.5011

[email protected] [email protected] [email protected] [email protected] [email protected]

+1.724.772.8688

[email protected]

+1.724.772.8681

[email protected]

+1.724.772.8641 +1.724.772.7506 +1 727 480 5180

[email protected] [email protected] [email protected]

E-mail Addresses and Telephone Extensions for PRI Staff (Performance Review Institute - USA +1 724.772.1616) (Performance Review Institute - Europe +44.870.350.5011) (Performance Review Institute - China +86.10.6461.9807) (Performance Review Institute - Japan + 81.568.35.3520) Marcyjanik, David Markardt, Julia Martin, Seema

McCabe, Justin McKinley, Stacey McMeans, Shannon McSorley, Brittany Morrill, Lacy Nixon, Robert Novak, Linda O’Connor, Kellie Parvez, Shariq Phillis, Jim Pinto, Joe Ploucha, Mike Pollock, Brett Popova, Jelena Powers, Ian Purnell, Keith Rasmussen, Takako Revers, Stan Rigot, Dina Roach, Kellie Rubright, Julie Sanchez, David Sanz, Christine Shiveley, Chelsea Shultz, Glenn Simpson, Ian Statham, Andy Stefanakis, Louise Stefanchik, Michele Steffey, Jon Strotmeyer, Michele Tibma, John Washington, A’Raiyna Wetzel, Kevin Yu, Shanwen Zajacs, Lisa

Staff Engineer – Nondestructive Testing Staff Engineer – Electronics Director, European Operations, Global Marketing, Professional Development and European Business Development Research & Development Specialist CSR – AQS, NDT and Welding Coordinator, Supplier & Subscriber Services CSR – Elastomer Seals, Fluids, Heat Treating and Sealants Registrar Process Coordinator Senior Staff Engineer, Chemical Processing Manager, Auditor Planning & Scheduling Nadcap Program Coordinator Software Engineer Controller Executive Vice President and Chief Operating Officer Subscriber Support Specialist Sales Engineer Marketing & Communications Coordinator Software Developer Staff Engineer - Elastomer Seals, Fluids, and Sealants PRI Japan Coordinator Senior Staff Engineer - Heat Treating & Weld Registrar Process Specialist Associate CSR – AQS, NDT, Welding Executive Assistant & HR Coordinator Professional Development Administrator – Europe Manager, Legal Services Business Systems Support Coordinator Senior Data Analyst Associate Program Manager - Welding Senior Staff Engineer - Conventional Machining as a Special Process & NDT Business Systems Manager Supervisor – eQuaLearn Program Manager, Informatics Solutions Nadcap Training Coordinator / Document Control Administrator Staff Engineer – Composites/NMMM/NMMT Informatics Support Coordinator Senior Staff Engineer - Materials Testing Laboratories Software Engineer Registrar Process Specialist

42

+1.724.772.7113 +1.724.772.8649 +44.870.350.5011

[email protected] [email protected] [email protected]

+1.724.772.8693 +1.724.772.8566 +1.724.772.8659 +1.724.772.7574 +1.724.772.8648 +1.724.772.8596 +1.724.772.8669 +1.724.772.8676 +1.724.772.8686 +1.724.772.8565 +1.724.772.7175 +1.513.552.5071 +1.724.772.7567 +44.870.350.5011 +1.724.772.4073 +1.724.772.8685 +81.568.35.3520 +44.1332.869.271 +1.724.772.8682 +1.724.772.7173 +1.724.772.8595 +44.870.350.5011 +1.724.772.8584 +1.724.772.7110 +1.615.382.5075 +44.133.286.9272 +44.133.286.9276

[email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] kroach@p-r-i-org [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected]

+1.724.772.8658 +1.724.772.8645 +1.724.772.7505 +1.724.772.8674

[email protected] [email protected] [email protected] [email protected]

+1.724.772.7148 +1.724.772.8687 +1.724.772.8652 +1.724.772.8675 +1.724.772.8671

[email protected] [email protected] [email protected] [email protected] [email protected]

Training Sessions eAuditNet Overview for Subscribers Monday, October 20th Directly following the Subscriber Orientation & Tutorial

eAuditNet Overview for Suppliers

Tuesday, October 21st Directly following the Supplier Orientation & Tutorial

43

Nadcap Customer Support Initiative (NCSI) The Nadcap Customer Support Initiative (NCSI) is a free, web based training program designed to teach suppliers more about the Nadcap process. The training reviews many topics including: audit preparation, a review of Nadcap Operating Procedures, information on common findings, Root Cause advice and more. To better support the Nadcap supplier community, the Nadcap Customer Support Initiative (NCSI) training is now available online. This means greater flexibility and availability for suppliers, who can benefit from the information at their convenience. The presentation is available on www.eAuditNet.com under Public Documents in the General Document section or on www.p-r-i.org under Nadcap in the Supplier Info section. After reviewing, if a supplier has any questions regarding the presentation, they may contact a member of the Global Scheduling team. Subscriber Orientation & Tutorial All new Subscriber participants are advised to attend the Nadcap Subscriber Introduction at 8:00 a.m. on Monday, October 20th. The tutorial is a general Nadcap presentation geared toward Subscribers. It provides the audience an overview of the structure and functionality of the Nadcap program. As well as the opportunity to ask general Nadcap questions. Supplier Orientation & Tutorial All new Supplier participants are advised to attend the Nadcap Supplier Introduction at 8:00 am on Tuesday, October 21st. The tutorial is a general Nadcap presentation geared toward Suppliers. It provides the audience an overview of the structure and functionality of the Nadcap program, as well as the opportunity to ask general Nadcap questions. Supplier Support Committee (SSC) The Supplier Support Committee’s (SSC) Mission is to represent the supplier community and work with the Nadcap Management Council (NMC) to enhance the effectiveness and economical value of the Nadcap system for the mutual benefit of Suppliers and Subscribers. The SSC is made up of active Nadcap accredited Suppliers who are willing to help new Suppliers through the process, as well as assisting experienced Suppliers to establish, maintain and improve their accredited processes. The focus of the SSC is on the overall Nadcap procedural process and issues which affect all Nadcap accredited Suppliers. The SSC offers a Supplier Mentoring program, dedicated to assisting those Suppliers who are new to the process and/or those needing assistance with navigating through the Nadcap system by providing names and contact information of experienced Nadcap Suppliers. If you would like to work with a Mentor please send an email to [email protected]. All suppliers are urged to attend the SSC Meeting on Tuesday, October 21st from 5:00 pm-6:30 pm to learn more about changes within the Nadcap program, provide feedback on issues that affect them and ask general Nadcap questions.

44

NOTES

45

46