conferenceseries.com
Steel Congress 2017
Tentative Program 3rd Euro Congress on
Steel and Structural Engineering November 16-17, 2017 London, UK
Interactive Sessions
Keynote Lectures Exhibitors
Plenary Lectures
Workshops
B2B
Meetings
***For available speaker
slots***
[email protected] http://construction-steel.conferenceseries.com/
conferenceseries.com
Steel Congress 2017
Program at A Glance
Day 1 Reception/Registration General Session
Inaugural Address
Morning Sessions
Keynote/Plenary Talk 1 (Booked) Least of 3 Keynote/Plenary Talks
Keynote/Plenary Talk 2 (Booked) Keynote/Plenary Talk 3 (Booked) Panel Discussions/Group Photo Coffee/Tea Break (Networking)
5 Speakers (20min) (Booked) Lunch Break
6 Speakers (20min) slots available Coffee/Tea Break (Networking)
5 Speakers (20min) slots available
Evening Sessions Morning Sessions
Day 2 Session 1
Session 2
5 Speakers (20min) (Booked)
5 Speakers (20min) (Booked)
Coffee/Tea Break (Networking)
5 Speakers (20min) (Booked)
5 Speakers (20min) (Booked) Lunch Break
5 Speakers (20min) slots available
5 Speakers (20min) slots available
Coffee/Tea Break (Networking)
5 Speakers (20min) slots available
5 Speakers (20min) slots available
Award & Closing Ceremony NOTE: Program Schedule is subject to change with final allotment of the speaker slots
http://construction-steel.conferenceseries.com/
conferenceseries.com
Steel Congress 2017
Past Conference Speakers Of Steel Congress Title: Cyclic Behavior and Design of Wide-Flange Steel Beam-Columns Bent about Weak Axis Gulen Ozkula, University of California, USA Title: The Struggles and Unknowns of Virtual Design & Construction Ehab Hamouda, XL Construction, USA Title: Next generation steel and composite infrastructure Brian Uy, The University of New South Wales, Australia Title: Prediction method of maximum seismic response for vibration control steel frames with scalingframe device installed Akinobu Kano, Tokyo University of Science, Japan Title: An experimental study of embedded connection for lightweight steel square tube filled with adhesives Itsuki Yagi, Tokyo University of Science, Japan Title: Repair method of damaged steel braced structure and restoring force characteristics after repair state Ryotaro Arai, Tokyo University of Science, Japan Title: An experimental and analysis study on vibration control devices called as hybrid scaling-frame Hideaki Azu, Tokyo University of Science, Japan Title: A study on ultimate seismic states of multi-story horizontally mixed structural system and feasibility on connection joints Kento Mori, Tokyo University of Science, Japan Title: Develop a Method to Estimate the Tension of Torque-Shear High Strength Bolts Hwan-Seon Nah, Korea Electric Power Corporation Research Institute, Korea Title: Entrainment Defects in Steels John Campbell, University of Birmingham, UK Title: Bolted connections in cold formed steel angles with emphasis on the efficiency reduction due to shear lag Luciano Mendes Bezerra, Universidade de Brasilia, Brasil Title: Advanced building steel structures and envelopes: executive design methods and Massimiliano Nastri, Polytechnic of Milan, Italy Title: Double Web Angle Connection Behaviour and Rigidity in Existence of Gusset Massood Mofid, Sharif University of Technology, Iran
strategies Plate
Title: E-BABE-Seismic Retrofit in Building Structures Using Shape Memory Alloys Mohammad Hooshmand, Nabi Akram University, Iran Title: Determination of Energy Efficiency for Six Kinds of Insulation Materials in Different Two Methods and Wall Types Used F.Nihal Tuzun, Hitit University, TURKEY Title: Three dimensional solutions for smart composite/sandwich plates subjected to Levy-type support conditions using extended Kantorovich method Poonam Kumari, IIT Guwahati, India Title: Challenges and recent advances in Optimum Design of Steel Structures
http://construction-steel.conferenceseries.com/
conferenceseries.com
Steel Congress 2017
Saeid Kazemzadeh Azad, Atilim University, Turkey Title: Metallurgical investigation of breakage of automotive spring washer during twist test Souvik Das, Tata Steel Limited, India Title: Failure Analysis of Slurry pump Impeller: Wrong selection of material Subodh Patel, Tata Steel Limited, India Title: Digital Innovation for Civil Infrastructure – Structural Health Monitoring Ying Wang, University of Surrey, UK Title: Time-dependent analysis of RC structures considering the construction sequences and structural symmetry WonHo Lee, Korea Advanced Institute of Science and Technology, Korea Title: Seismic evaluation of the diagrid structure based on the low-to-moderate seismicity region earthquake data Yong Jae Lee, Korea University, Korea Title: Numerical evaluation of resistance capacity for CFT columns Ju young Hwang, Korea Advanced Institute of Science and Technology, Korea Title: Blast resistance on a composite panel with infilled nano-composite Min-jae Park, Korea University, Korea Title: 3D model for axially loaded square concrete steel tubular columns subjected to fire Mahmood Md Tahir, Universiti Teknologi Malaysia, Malaysia Title: Top and seat angle connections subjected to elevated temperatures: Finite element and mechanical modeling Sana N. El Kalash, American University of Beirut, Lebanon Title: Collapse performance of steel buildings and guidelines for progressive collapse modeling and analysis Halil Sezen, The Ohio State University, USA Title: A study of equivalent strength and effects of brace type of multi-story steel braced frames Takayuki Kinoshita, Tokyo University of Science, Japan Title: Model update methods for vibration based damage detection in four story book shelf Ardalan Sabamehr, Concordia University, Canada Title: Architecturally exposed structural steel Howida Borziza, Gulf Consult, Kuwait Title: Load bearing capacity of light steel wall panels with various stud configuration Shek Poi Ngian, Universiti Teknologi Malaysia, Malaysia Title: E-BABE- Effect on The Formation of Boride Layer of Increasing Amount of Niobium in Pack Boronozing of Iron Niobium Binary Alloys Eyyup Murat KARAKURT, Adıyaman University, Turkey Title: Modal damping ratios of low rise steel frames with seesaw system George A. Papagiannopoulos, University of Patras, Greece Title: A New Concept of Crack Analysis of Reinforced Concrete Members Gintaris Kaklauskas, Vilnius Gediminas Technical University, Lithuania Title: Anisogrid Lattice Structures: an interesting paradigm for civil engineering Giovanni Totaro, CIRA-Italian Aerospace Research Center, ITALY
http://construction-steel.conferenceseries.com/
conferenceseries.com
Steel Congress 2017
Title: Improvement in hot rolled shape defect after cold rolling Avinash Mishra, TATA Steel Limited, India Title: Load bearing capacity of light steel wall panels with various stud configuration Shek Poi Ngian, Universiti Teknologi Malaysia, Malaysia Title: Rethinking the Evaluation of the Robustness of Steel Structures Robert Driver, University of Alberta, Canada Title: Effect of High Al, Nb and V on the hot ductility of high Al TWIP steels Abdullah Qaban, University of London, UK Title: Estimating Seismic Demands for Performance-Based Engineering of Steel Buildings Juan C Reyes, Universidad de los Andes, Colombia Title: Towards the Design of Super Columns AbdulQader S Al-Najmi, Jordan University School of Engineering, Jordan Title: CFRP Strengthening and Rehabilitation of Corroded Steel Pipelines under Direct Indentation Mohamed Elchalakani, Higher Colleges of Technology, UAE Title: Compressive Strength of Concrete-filled thin steel stubs: Theoretical and experimental Study Jahid Zeghiche, Al-Baha University, Saudi Arabia Title: Eco-Con The environmental impact evaluation and testing of sustainable inorganic binders: A green alternative to ordinary Portland cement Beste Cubukcuoglu, Antalya International University, Turkey Title: Buckling Capacity of Pretwisted Steel Columns; Experiments and Finite Element Study Farid Abed, American University of Sharjah, UAE Title: Further Tests on Thin Steel and Composite Fabricated Stubs Jahid Zeghiche, Al-Baha University, Saudi Arabia Title: Buckling load and effective length of web tapered built-up columns in pre-engineered steel buildings Ramesh Meghrajani, Visvesvaraya National Institute of Technology, India
Title: Structural Steel Connection Design: between the Structural Consultant and the Steel Fabricator Magdi A Khalifa, Abu Dhabi, UAE Title: Building Resilience in Construction Site Operations: Shifting from Protective Safety to Productive Safety Sherif Mohamed, Griffith University Queensland, Australia Title: Decision Support for Project Prioritization in A/E/C Industry Tarek Mahfouz, Ball State University, USA Title: University Leadership for Advancing the Steel Construction Industry-Regional Partnerships for Global Impact Robert G Driver, University of Alberta, Canada
http://construction-steel.conferenceseries.com/
conferenceseries.com
Steel Congress 2017
Title: Behaviors of flag-shaped dampers using combination of magnetic friction and rubber springs Eunsoo Choi, Hongik University, Korea Title: Life extension, upgrade and repair of welded structures – Towards the use of High Strength Steels Zuheir Barsoum, Khalifa University, UAE Title: Design and Behavior of Steel Structures and Members from Constructability Perspectives M Manikandan, Gulf Consult, Kuwait Title: Evaluation of Connection Systems in Modular Constructions Merve Sagiroglu, Erzurum Technical University, Turkey Title: Comparison of Steel and Composite Analysis of a Multi-storey Building Cigdem Avci-Karatas, Yalova University, Turkey Title: Advances on shear strength and behavior of bridge girders with steel corrugated webs Mostafa Fahmi Hassanein, Tanta University, Egypt Title: Recycling of waste refractory bricks for the production of dense refractory Bahia Rabehi, University M’Hamed Bougara of Boumerdes, Algeria Title: A new approach in optimal semi-active control of structures Reza Karami Mohammadi, K N Toosi University of Technology, Iran Title: Cold Bending Steel Beams: a State-of The-Art Engineering Solution that Meets Industry Challenges Antoine N Gergess, University of Balamand, Lebanon Title: Experimental Investigation of Moment-Rotation Curves of End-Plate Connection using Sinusoidal Beam Merve Sagiroglu, Erzurum Technical University, Turkey Title: Performance of ordinary and self compacting concrete using recycled concrete aggregates Said Kenai, University of Blida, Algeria Title: Seismic resistant design of connections with the use of perforated beams Konstantinos Daniel Tsavdaridis, University of Leeds, UK Title: Rethinking the Application of Engineering: Structural Analysis of Economic Impact Risk Propagation in Infra_Structures Albert Owusu, Bana Consulting Engineers, Australia Title: Role of Composite Joints on the Performance of Steel-Framed Buildings in Fire Khalifa S Al-Jabri, Sultan Qaboos University, Oman Title: Finite Element Modeling of the Seismic Behavior and Fracture of Concentric Braces Madhar Haddad, United Arab Emirates University , UAE Title: Lateral Stability of Damaged Open Thin-walled Beams using Lyapunov’s Second method Peter Jiki, University of Agriculture, Nigeria Title: Local Failure Behaviour of the Steel-Concrete Composite Beam with Web Openings in Various Shapes under Axial Tension and Uniaxial Negative Bending
http://construction-steel.conferenceseries.com/
conferenceseries.com
Steel Congress 2017
Mahesan Bavan, National University of Malaysia, Malaysia Title: Performance Based Design of Cold Formed Steel Structures Kamal M Bajoria, Indian Institute of Technology Bombay, India Title: Numerical investigation of composite materials and structures Lmokhtar Ikharrazne, National School of Applied Sciences, Morocco Title: Steel versus steel-reinforced concrete bridges Yassin AL-Kour, K&A Beirut, Lebanon Title: A comparative assessment of probabilistic seismic hazard for pseudo-negative stiffness control of a steel base-isolated building Wei Gong, Huazhong University of Science and Technology, China Title: Experimental Investigation of the Fastening Parameters Influencing the Interfacial Behavior of Composite-Steel Anchored Lap Connections Omnia AbouEl-Hamd, United Arab Emirates University, UAE Title: Typical Fracture Behaviour of the Steel-Concrete Composite Beam with Web Openings in Various Sizes under Axial Tension and Uniaxial Negative Bending Mahesan Bavan, National University of Malaysia, Malaysia
http://construction-steel.conferenceseries.com/
conferenceseries.com
Steel Congress 2017
Conference Highlights • Metallurgy-Steel applications
• Environmental Technology
• Technological advancement
• Fabrication and construction
in Construction sector • Seismic Design • Composite Structures • Industrial and Non-Building structures • Building Science &
• Ecological Architecture • Architectural Design & Case studies • Urban Planning & Design • Retrofitting, Refurbishment & Sustainability
Technology
For detailed sessions, please visit: http://construction-steel.conferenceseries.com/ Submit your abstract online at: http://construction-steel.conferenceseries.com/abstract-submission.php Register online: http://construction-steel.conferenceseries.com/registration.php
http://construction-steel.conferenceseries.com/
conferenceseries.com
Steel Congress 2017 2017
Renowed Speakers
Akinobu Kano
Ardalan Sabamehr
Eiki Yamaguchi
Halil
Jeong Su
Ju-young Hwang
Mojtaba Valinejad
Ryotaro Arai
Takumi Ito
http://construction-steel.conferenceseries.com/
Brian Uy
Hideaki Azu
Cheng Yu
Daniel Abebe
Howida Borziza
Itsuki Yagi
Kento Mori
M.Tahir
Manikandan
Seu ki
Shek Poi
Takayuki
Tomoe Onoda
WonHo Lee
conferenceseries.com
Glimpses of Steel Structure
http://construction-steel.conferenceseries.com/
Steel Congress 2017
conferenceseries.com
Steel Congress 2017
Plan your Trip to London
Big Ben: London’s iconic national timepiece
Buckingham Palace: Home of the British Queen and state rooms.
London at Night Time
Palace of Westminster: Iconic home of UK parliament.
http://construction-steel.conferenceseries.com/
London Eye: Iconic riverside observation wheel.
conferenceseries.com 689th Conference
Scientific Program 2nd World Congress and Exhibition on
Construction
&
Steel Structure
September 22-24, 2016 Las Vegas, USA
Hosting Organizations: Conference Series LLC 2360 Corporate Circle., Suite 400 Henderson, NV 89074-7722, USA Ph: +1-702-508-5200 Ext: 8074, Fax: +1-650-618-1417, Toll free: +1-800-216-6499 Conference Series Ltd Heathrow Stockley Park Lakeside House, 1 Furzeground Way, Heathrow, UB11 1BD, UK, Tel: +1-800-216-6499 Email:
[email protected];
[email protected]
conferenceseries.com
Steel Congress 2017
Brian Uy University of New South Wales Australia
Syed M. Ahmed East Carolina University USA
Halil Sezen The Ohio State University USA
Cheng Yu University Of North Texas Dallas, USA
Walid Tizani The University Of Nottingham
Mauro Nicoletti Politecnico di Milano
M Manikandan Gulf Consult-Kuwait Kuwait
Mostafa Fahmi Hassanein Tanta University, Egypt Egypt
http://construction-steel.conferenceseries.com/
Day 1
September 22, 2016
Registrations
conferenceseries.com
Keynote Forum Title: The ABC and D of Steel and Composite Structures: Australian Experiences Keynote Forum Brian Uy, The University of New South Wales, Australia Group Photo Networking & Refreshments Break @ Foyer Title: Collapse performance of steel buildings with infill walls Halil Sezen , The Ohio State University, USA Sessions: Construction Engineering | Structures | Civil Engineering Session Chair: M Manikandan, Gulf Consult, Kuwait Session Introduction Takumi Ito, Tokyo University of Science, Japan Shek Poi Ngian, Universiti Teknologi Malaysia, Malaysia M Manikandan, Gulf Consult, Kuwait Lunch Break@ Foyer Young Research Forum
Kento Mori, Tokyo University of Science, Japan Hideaki Azu, Tokyo University of Science, Japan Ryotaro Arai, Tokyo University of Science, Japan Itsuki Yagi, Tokyo University of Science, Japan Akinobu Kano, Tokyo University of Science, Japan Tomoe Onoda, Tokyo University of Science, Japan Panel Discussion
Networking & Refreshments Break@ Foyer Day 2 September 23, 2016
Flamingo-2
Keynote Forum Title: Application of Japanese high-performance steel SBHS500 to girder Eiki Yamaguchi, Kyushu Institute of Technology, Japan Title: Risk management in the construction projects from the conceptual design and life cycle perspectives M Manikandan, Gulf Consult, Kuwait Networking & Refreshments Break@ Foyer Session Introduction Sessions: Steel Construction | Environmental Engineering | Design and Behavior of Steel Structures and Members | Construction Industry Session Chair: Brian Uy, The University of New South Wales, Australia Session Introduction Title: Architecturally exposed structural steel Howida Borziza, Gulf Consult, Kuwait Young Research Forum Title: Managing structural health monitoring data using building information modeling Mojtaba Valinejadshoubi, Concordia University, Canada Title: Application of building information modeling in SHM sensors’ visualization, data management and identification of their optimal placement in a building Azin Shakibabarough, Concordia University, Canada Title: Model update methods for vibration based damage detection in four story book shelf Ardalan Sabamehr, Concordia University, Canada Title: A study of equivalent strength and effects of brace type of multi-story steel braced frames Takayuki Kinoshita, Tokyo University of Science, Japan Lunch Break@ Foyer WORKSHOP Title: Collapse performance of steel buildings and guidelines for progressive collapse modeling and analysis Halil Sezen, The Ohio State University, USA Young Research Forum Title: Top and seat angle connections subjected to elevated temperatures: Finite element and mechanical modeling Sana N. El Kalash, American University of Beirut, Lebanon Networking & Refreshments Break@ Foyer Poster Sessions Title: A study on the application of surveillance technology with large bolt axial force of nuclear facilities Jeongsu Ju, University of Seoul, Korea Title: Analytical study of the H-shaped brace according to reinforcement rate of non-welded buckling restraint element Seul-Ki Hwang, University of Seoul, Korea Panel Discussion
Day 3 September 24, 2016
Flamingo-2
Keynote Forum Title: Screw connections in cold-formed steel clip angles subjected to uplift forces Cheng Yu, University of North Texas, USA Sessions: Digital Structural Designs| Safety Management in Construction | Earthquake resistance engineering structure | Fire Safety Engineering and Design of Structures Session Chair: Cheng Yu, University of North Texas, USA Session Intrudution Title: Reduced web and flange link sections to enhance the ductility of link-to-column connection of eccentrically braced frames Daniel Y Abebe, Chosun University, Korea Networking & Refreshments Break@ Foyer Title: 3D model for axially loaded square concrete steel tubular columns subjected to fire Mahmood Md Tahir, Universiti Teknologi Malaysia, Malaysia Title: Blast resistance on a composite panel with infilled nano-composite Min-jae Park, Korea University, Korea Young Research Forum Title: Numerical evaluation of resistance capacity for CFT columns Ju young Hwang, Korea Advanced Institute of Science and Technology, Korea Title: Seismic evaluation of the diagrid structure based on the low-to-moderate seismicity region earthquake data Yong Jae Lee, Korea University, Korea Title: Time-dependent analysis of RC structures considering the construction sequences and structural symmetry WonHo Lee, Korea Advanced Institute of Science and Technology, Korea Lunch Break@ Foyer Award Ceremony Thanks giving & Closing Ceremony
Bookmark your dates 3rd World Congress and Exhibition on
Construction & Steel Structure September 26-27, 2017 Abu Dhabi, UAE e-mail:
[email protected];
[email protected] Website: construction-steel-structure.omicsgroup.com Conference Series LLC 2360 Corporate Circle, Suite 400 Henderson, NV 89074-7722, USA Ph: +1-888-843-8169 Fax: +1-650-618-1417
[email protected]
Conference Series Ltd. Traian Str., No.61, Constanta 900720, Romania, Tel: 0805-080048 Heathrow Stockley Park Lakeside House, 1 Furzeground Way, Heathrow, UB11 1BD, United Kingdom
[email protected]
OMICS International 6th Floor, North Block, Divyasree Building, Raidurg Hyderabad, Telangana, INDIA-500032 Tel: +91-40-33432300
[email protected]
Toll free USA & Canada: +1-800-216-6499 Australia: +1-800-651-097 Europe: 0805-080048
428th OMICS International Conference
Scientific Program World Congress and Exhibition on
Construction & Steel Structure Dates : November 16-18, 2015 Venue : Crowne Plaza, Dubai, UAE
Exhibitor
Sponsor
OMICS International Conferences 2360 Corporate Circle., Suite 400 Henderson, NV 89074-7722, USA Phone: +1-888-843-8169, Fax: +1-650-618-1417, Toll free: +1-800-216-6499 Toll free: +1-800-216-6499, Email:
[email protected]
Scientific Program Day 1
November 16, 2015
Registrations
Al-Dhiyafah 1
Opening Ceremony Keynote Forum Title: Rethinking the Evaluation of the Robustness of Steel Structures Robert Driver, University of Alberta, Canada Group Photo @ 10:30-10:35 Coffee Break @ Foyer Title: Next generation steel and composite infrastructure Brian Uy, The University of New South Wales, Australia Title: Ascertaining Key Risks in the Construction Projects from Stakeholder and Life Cycle Perspectives M Manikandan, Gulf Consult, Kuwait Track 1: Construction Engineering Track 2: Structures Track 5: Civil Engineering Session chair: Brian Uy, The University of New South Wales, Australia Session co-chair: AbdulQader S Al-Najmi, Jordan University School of Engineering, Jordan Session Introduction Title: Estimating Seismic Demands for Performance-Based Engineering of Steel Buildings Juan C Reyes, Universidad de los Andes, Colombia Title: Towards the Design of Super Columns AbdulQader S Al-Najmi, Jordan University School of Engineering, Jordan Title: CFRP Strengthening and Rehabilitation of Corroded Steel Pipelines under Direct Indentation Mohamed Elchalakani, Higher Colleges of Technology, UAE Lunch Break @ Al-Tannour Title: Compressive Strength of Concrete-filled thin steel stubs: Theoretical and experimental Study Jahid Zeghiche, Al-Baha University, Saudi Arabia Title: Eco-Con The environmental impact evaluation and testing of sustainable inorganic binders: A green alternative to ordinary Portland cement Beste Cubukcuoglu, Antalya International University, Turkey Title: Buckling Capacity of Pretwisted Steel Columns; Experiments and Finite Element Study Farid Abed, American University of Sharjah, UAE Title: Further Tests on Thin Steel and Composite Fabricated Stubs Jahid Zeghiche, Al-Baha University, Saudi Arabia Title: Buckling load and effective length of web tapered built-up columns in pre-engineered steel buildings Ramesh Meghrajani, Visvesvaraya National Institute of Technology, India Title: Structural Steel Connection Design: between the Structural Consultant and the Steel Fabricator Magdi A Khalifa, Abu Dhabi, UAE Panel Discussion Page 18
Coffee Break @ Foyer Day 2
November 17, 2015
Al-Dhiyafah 1 Keynote Forum Title: Building Resilience in Construction Site Operations: Shifting from Protective Safety to Productive Safety Sherif Mohamed, Griffith University Queensland, Australia Title: Stress Concentration due to Shear lag in Box Girder Eiki Yamaguchi, Kyushu Institute of Technology, Japan Coffee Break @ Foyer Track 3: Steel Construction Track 7: Environmental Engineering Track 9: Design and Behavior of Steel Structures and Members Track 10: Construction Industry Session chair: Konstantinos Daniel Tsavdaridis, University of Leeds, UK Session co-chair: M Manikandan, Gulf Consult, Kuwait Session Introduction 11:10-11:15 Title: Decision Support for Project Prioritization in A/E/C Industry Tarek Mahfouz, Ball State University, USA Title: University Leadership for Advancing the Steel Construction Industry—Regional Partnerships for Global Impact Robert G Driver, University of Alberta, Canada Title: Behaviors of flag-shaped dampers using combination of magnetic friction and rubber springs Eunsoo Choi, Hongik University, Korea Title: Life extension, upgrade and repair of welded structures – Towards the use of High Strength Steels Zuheir Barsoum, Khalifa University, UAE Title: Design and Behavior of Steel Structures and Members from Constructability Perspectives M Manikandan, Gulf Consult, Kuwait Lunch Break @ Al-Tannour Workshop on Advanced Design of Welded Structures-Introduction to new design methods and IIW recommendations by: Zuheir Barsoum, Khalifa University, UAE Title: Evaluation of Connection Systems in Modular Constructions Merve Sagiroglu, Erzurum Technical University, Turkey Title: Comparison of Steel and Composite Analysis of a Multi-storey Building Cigdem Avci-Karatas, Yalova University, Turkey Title: Advances on shear strength and behavior of bridge girders with steel corrugated webs Mostafa Fahmi Hassanein, Tanta University, Egypt Coffee Break @ Foyer Poster Presentations CSS-01 CSS-02
Title: Recycling of waste refractory bricks for the production of dense refractory Bahia Rabehi, University M’Hamed Bougara of Boumerdes, Algeria Title: A new approach in optimal semi-active control of structures Reza Karami Mohammadi, K N Toosi University of Technology, Iran Speaker Sessions Page 19
Title: Cold Bending Steel Beams: a State-of The-Art Engineering Solution that Meets Industry Challenges Antoine N Gergess, University of Balamand, Lebanon Title: Experimental Investigation of Moment-Rotation Curves of End-Plate Connection using Sinusoidal Beam Merve Sagiroglu, Erzurum Technical University, Turkey Title: Performance of ordinary and self compacting concrete using recycled concrete aggregates Said Kenai, University of Blida, Algeria Panel Discussion Day 3
November 18, 2015
Al-Dhiyafah 1 Track 4: Digital Structural Designs Track 6: Safety Management in Construction Track 7: Earthquake resistance engineering structure Track 11: Fire Safety Engineering and Design of Structures Session chair: Sherif Mohamed, Griffith University Queensland, Australia Session Introduction Title: Seismic resistant design of connections with the use of perforated beams Konstantinos Daniel Tsavdaridis, University of Leeds, UK Title: Rethinking the Application of Engineering: Structural Analysis of Economic Impact Risk Propagation in Infra_Structures Albert Owusu, Bana Consulting Engineers, Australia Title: Role of Composite Joints on the Performance of Steel-Framed Buildings in Fire Khalifa S Al-Jabri, Sultan Qaboos University, Oman Coffee Break @ Foyer Title: Finite Element Modeling of the Seismic Behavior and Fracture of Concentric Braces Madhar Haddad, United Arab Emirates University , UAE Title: Lateral Stability of Damaged Open Thin-walled Beams using Lyapunov’s Second method Peter Jiki, University of Agriculture, Nigeria Title: Local Failure Behaviour of the Steel-Concrete Composite Beam with Web Openings in Various Shapes under Axial Tension and Uniaxial Negative Bending Mahesan Bavan, National University of Malaysia, Malaysia Title: Performance Based Design of Cold Formed Steel Structures Kamal M Bajoria, Indian Institute of Technology Bombay, India Title: Numerical investigation of composite materials and structures Lmokhtar Ikharrazne, National School of Applied Sciences, Morocco Title: Steel versus steel-reinforced concrete bridges Yassin AL-Kour, K&A Beirut, Lebanon Lunch Break @ Al-Tannour Young Research Forum Title: A comparative assessment of probabilistic seismic hazard for pseudo-negative stiffness control of a steel base-isolated building Wei Gong, Huazhong University of Science and Technology, China Title: Experimental Investigation of the Fastening Parameters Influencing the Interfacial Behavior of CompositeSteel Anchored Lap Connections Omnia AbouEl-Hamd, United Arab Emirates University, UAE Title: Typical Fracture Behaviour of the Steel-Concrete Composite Beam with Web Openings in Various Sizes under Axial Tension and Uniaxial Negative Bending Mahesan Bavan, National University of Malaysia, Malaysia Closing Ceremony Page 20
