AEROSPACE QUALITY SYSTEMS (AQS) (Susan Frailey, +1 618 615 4478,
[email protected]) (Mike Gutridge, +1 740 587 9841,
[email protected]) The Aerospace Quality Systems Task Group is conducting audits to demonstrate compliance to the PRI AC7004. This quality system audit is required where no existing quality system approval exists in accordance with the Nadcap Operating Procedure NOP-002. TASK GROUP VOTING MEMBERS Subscriber Voting Members Patrice Bleau Bombardier, Inc. UVM Robert Bodemuller Ball Aerospace & Technologies UVM
Warren Ferree 309th Maintenance Wing-Hill AFB UVM Harold Finch Spirit AeroSystems, Inc. VCH/UVM
Robin Borrelli The Boeing Company CHR/UVM (Chair – October 2012)
M’Hamed El Haouari Bombardier, Inc ALT/UVM
Mark Covert Honeywell Aerospace UVM
Keith Kastner Cessna Aircraft Company UVM
David Day GE Aviation UVM
Angelina Mendoza Goodrich (UTAS) UVM
Supplier Voting Members Mark Brown Kaman Aerospace Corp Jacksonville SVM
Debra Maier Alliant ATK Aerospace SVM
17
Earl Pruett Lockheed Martin Corp. UVM Dave Vaughn Spirit AeroSystems Inc ALT/UVM Patricia Wesemann The Boeing Company ALT/UVM George Winchester Northrop Grumman Corporation UVM
Jim Tuminello Tech Met SVM
AEROSPACE QUALITY SYSTEMS (AQS) (Susan Frailey, +1 618 615 4478,
[email protected]) (Mike Gutridge, +1 740 587 9841,
[email protected]) AQS LIAISONS Robin Borelli The Boeing Company COMP Task Group
Joel Mohnacky Hamilton Sundstrand CT Task Group
Bruce Brownfield Lockheed Martin Corp. HT Task Group
Earl Pruett Lockheed Martin WLD Task Group
Mike Coleman The Boeing Company CP Task Group
Pete Torelli The Boeing Company NDT Task Group
Mark Covert Honeywell Aerospace NMSE Task Group
Barbara Waller Raytheon ETG Task Group
David Day GE Aviation CMSP Task Group
18
CHEMICAL PROCESSING (CP) (Mike Graham +1 724 772 8646,
[email protected]) (Nigel Cook, +44 870 350 5011,
[email protected]) (Bill Dumas +1 724 772 8673,
[email protected]) (Robert Lizewski, +1 724 772 8681,
[email protected]) (William Calvert +1 724-772-8524,
[email protected]) (Robert Nixon +1 724-772-8596,
[email protected]) The Chemical Processing Task Group is conducting audits to demonstrate compliance to the AC7108 series of documents. These audits address the following types of processes: • Stripping • Etching • Anodizing • Surface Prep Prior to Metal Bond • Laboratory Evaluation • Chemical Cleaning • Surface Treatment/Passivation • Paint/Dry Film Coatings • Chemical Milling • Vacuum Cadmium & Aluminium IVD • Plating • Conversion/Phosphate Coating
TASK GROUP VOTING MEMBERS Subscriber Voting Members Hal Abel Raytheon Co. UVM
Sylvia Franklin The Boeing Company ALT/UVM
Angelina Mendoza Goodrich (UTAS) ALT/UVM
Paul Slater Rockwell Collins Inc. UVM
Cary Baker The Boeing Company ALT/UVM
Laurent Geerts Sonaca UVM
Tom Moreland Bombardier Inc. UVM
Steve Starr Honeywell Aerospace UVM
Malik Boutoba Eurocopter UVM
Alan Gilbert Cessna Aircraft Company UVM
Raj Nagarajan General Dynamics Corp. UVM
Mike Stolze Northrop Grumman Corporation UVM
Craig Bowden BAE Systems – MAI ALT/UVM
Greg Haataja Bell Helicopter Textron ALT/UVM
Jerker Nordh GKN Aerospace Sweden AB UVM
Yuhui Sun COMAC UVM
David Burke BAE Systems – E & I UVM
Gerald Harvey Triumph AeroStructures - VAD ALT/UVM
Jim O’Shea GE Aviation ALT/UVM
Zia Usmani BAE Systems - MAI UVM
Bob Cashman Parker Aerospace Group UVM
John Koenig The Boeing Company UVM
Eric T. Oswald Raytheon Co. ALT/UVM
Shawn Vierthaler Spirit AeroSystems Inc. UVM
Jim Chan Honeywell Aerospace UVM
Bob Koukol Honeywell Aerospace ALT/UVM
Garry Pickett Pratt & Whitney UVM
Debbie Vogel Triumph Aerostructures - VAD ALT/UVM
Michael Coleman The Boeing Company ALT/UVM
Serge Labbe Heroux Devtek Inc. UVM
Muralikrishnan Ramalingam GE Aviation UVM
Michael Vosatka Rockwell Collins Inc. ALT/UVM
Terry Curtland Ball Aerospace & Technologies UVM
Marc-Andre Lefebvre Heroux Devtek Inc. ALT/UVM
Richard Shain General Dynamics Corp. ALT/UVM
Gene Wallace Triumph Aerostructures – VAD Fort Worth UVM
Karyn Deming Goodrich (UTAS) VCH/UVM
Nathalie Le Pottier Eurocopter ALT/UVM
Chris Reilly Hamilton Sundstrand UVM
Bob Denney Honeywell Aerospace ALT/UVM
Susan Lewis Lockheed Martin Corporation UVM
Josefa Rodriguez Baena EADS-CASA UVM
Peter Droste Airbus UVM
Mihaela Lupu SAFRAN Group ALT/UVM
Corazon Santos The Boeing Company ALT/UVM
Robert Faticanti Textron Systems UVM
Nick Magnapera BAE Systems – E & I ALT/UVM
Jerry Satchwell Rolls-Royce PLC CHR/UVM (Chair – February 2010)
Aleck Featherston Jr. Bell Helicopter Textron UVM
Veronique Marcel SAFRAN Group UVM
Roger Sellers Spirit AeroSystems Inc. ALT/UVM
19
Miao Wang COMAC ALT/UVM Wei Wang COMAC ALT/UVM Sergey Yesilevich Hamilton Sundstrand UVM
CHEMICAL PROCESSING continued on next page
CHEMICAL PROCESSING (CP) (Mike Graham +1 724 772 8646,
[email protected]) (Bill Dumas +1 724 772 8673
[email protected]) (Nigel Cook, +44 870 350 5011,
[email protected]) (Robert Lizewski, +1 724 772 8681,
[email protected]) (William Calvert +1 724-772-8524,
[email protected]) (Robert Nixon +1 724-772-8596,
[email protected])
TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Daniel Backus Har-Conn Chrome Co. SVM
William Ferris TechMetals Inc. SVM
Rosa Martin Superior Plating Inc. SVM
Gardiner Rynne Chem Processing Inc SVM
Phillip Bratton Hohman Plating & Mfg Inc. SVM
Ben Flores Applied Aerospace Structures Corp. SVM
David Michaud Fountain Plating Co. SVM
Guy Saenz Hi-Tech Metal Finishing SVM
William Miller Hohman Plating & Mfg. Inc. ALT/SVM
Tammi Schubert LMI Finishing Inc. SVM
Abdillah Mohamad Lord Corporation SVM
David Serbousek Olympic Scientific Inc. SVM
Laura Moyer Howmet Castings and Services, Inc. Dover Casting (AHDC) SVM
Steve Simacek Hytek Finishes Company SVM
Lee Bruce Robert Stuart Ltd. SVM Larry Carlson PPI Aerospace SVM John Carpenter U.S. Chrome Corp. of Connecticut SVM Stephane Chaumeil Galion SVM Steve Crest Stabile Plating SVM Jim Cummings Metal Finishing Co. SVM Robert Custer AAA Plating & Inspection Inc. SVM Warren DeCuir Lisi Aerospace Torrance ALT/SVM Jorge DellaCosta Chrome Plus International ALT/SVM Bob Denton B-D Industries Inc. ALT/SVM Jim Denton B-D Industries Inc. SVM Rachel DeSimone American Tinning & Galvanizing Co. SVM Scott Fabiano Imagineering Finishing Technologies SVM
Gary Fox Anodyne, Inc. SVM Ron Franklin ChemResearch Co. Inc. SVM Alex French Aerofin Laboratories Ltd. ALT/UVM Paul French Aerofin Laboratories Ltd. SVM
Simone Murphy-Fickenworth Chrome Plus International SVM
Sarah Fuqua Kearfott Corporation – Motion System Division SVM
Abdul Nathani Hi-Tech Metal Finishing ALT/SVM
Jonathan Hebben Ducommun Aerostructures Gardena SVM
Mike Noettl Magnetic Inspection Laboratory Inc. SVM
Bill Heeter Skills Inc. SVM
Patrick O’Leary Nu-Pro Limited SVM
Eric Jacklin F.M. Callahan & Son Inc. SVM
Gregory Penny Triumph Processing, Embee Division, Inc. SVM
David Jones Nex-Tech SVM
Ken Pham Lisi Aerospace Torrance SVM
Richard Kline X-R-I Testing SVM
Kim Porter Poly Metal Finishing SVM
Keven Kudelka Westfield Electroplating Co. SVM
Dennis Reidy CIL SVM
Jeff Logan Saporito Finishing Company ALT/SVM
Jim Ringer Tech Met SVM
Julie Mahan Unison Engine Components - Terre Haute SVM
Cynthia Roth Team Industrial Services TCM Division SVM
20
Greg Smotherman Jr. Ozark Mountain Technologies LLC SVM Vittorio Stana Avcorp Industries Inc. SVM Milt Stevenson Anoplate Corp. SVM Steve Stone Saporito Finishing Company SVM Yoshiomi Sukesada Asahi Kinzoku Kogyo Inc. SVM Mitchell Tanner Triumph Processing, Embee Division, Inc. ALT/UVM Jim Tuminello Tech Met ALT/SVM
COATINGS (CT) (Robert Lizewski, +1 724 772 8681,
[email protected]) (Jim Lewis +1 724 772 8688,
[email protected])
The Coatings Task Group is conducting audits to demonstrate compliance to the PRI AC7109 series of standards. These documents contain the Nadcap requirements for the following: • • • •
• • •
Thermal Spray Vapor Deposited Coatings Diffusion Coating Processes Stripping of Coating Materials
Coating Evaluation Plating of Coated Parts Heat Treating of Coated Parts
TASK GROUP VOTING MEMBERS Subscriber Voting Members Nicolas Barthelemy Eurocopter UVM
Erkan Kilic GE Aviation ALT/UVM
Jack Saunders Honeywell Aerospace UVM
Fabrice Crabos SAFRAN Group (Turbomeca) UVM
Dan Loveless Parker Aerospace UVM
Udo Schuelke Honeywell Aerospace ALT/UVM
James Dunn GE Aviation ALT/UVM
Joel Mohnacky Hamilton Sunstrand UVM
Jan Wigren GKN Aerospace Sweden AB VCH/UVM
Ben Evans Goodrich (UTAS) UVM
John Nerz GE Aviation UVM
Deborah Vogel Triumph Aerostructures – VAD UVM
Jon Higgins Rolls-Royce ALT/UVM
Clark Okawa Pratt & Whitney UVM
Karen Kim Pratt & Whitney ALT/UVM
Tim Pruitt Rolls-Royce CHR/UVM (Chair – July 2011) +1 317 230 3728
Supplier Voting Members Brent Bartlett Sulzer Metco Canada Inc. SVM
John Passmore St. Louis Metallizing SVM
Ronald Stewart Ellison Surface Technologies SVM
Dale Harmon Cincinnati Thermal Spray SEC/SVM
Steve Payne Praxair Surface Technologies SVM
Vern Talmadge Howmet Casting - Thermatech Coatings SVM
21
COMPOSITES (COMP) (Rebekah Braun +1 724 772 7116,
[email protected]) The Composites Task Group is conducting audits to demonstrate compliance to the PRI AC7118. These audits address the Nadcap requirements for the following processes: • CMP – Compression Molding • MB – Metal Bonding • CP – Core Processing • PAR – Prepeg/Adhesive Bonding/Resin Film Infusion • LRP – Liquid Resin Processing
TASK GROUP VOTING MEMBERS Subscriber Voting Members Monica Alcala Honeywell Aerospace UVM
Joseph DeVirgilio The Boeing Company ALT/UVM
Peter Atwell AIRBUS S.A.S SEC/UVM
Kevin Dowling Spirit AeroSystems UVM
Michael Bemis Goodrich (UTAS) UVM
Patrick Dunleavy SAFRAN Group ALT/UVM
Laura Benedetti SAFRAN Group ALT/UVM
Joe Dwyer Rolls-Royce UVM
Tara Campbell Rolls-Royce ALT/UVM
Achim Enzmann Eurocopter UVM
Elmer Cardwell General Dynamics ATP UVM
Marcel Francois SAFRAN Group UVM
Claude Chevalier SAFRAN Group ALT/UVM
Olivier Goupillon Eurocopter ALT/UVM
Ray Cleghorn The Boeing Company ALT/UVM
Steve Grunshaw BAE Systems – Military & Air Information (MAI) ALT/UVM
David Constable AIRBUS S.A.S ALT/UVM Lucia Cutillo Alenia Aermacchi S.p.A UVM Laurent DeJaie Sonaca ALT/UVM
Mike Kahler Ball Aerospace & Technologies UVM John Key Jr. Bell Helicopter CHR/UVM (Chair – October 2012) Betty Kocsis Honeywell Aerospace ALT/UVM Eric LeFort Sonaca UVM Frank Lennert The Boeing Company ALT/UVM Lance Loeks The Boeing Company UVM William Macias Goodrich (UTAS) ALT/UVM Leah Markowitz Honeywell Aerospace ALT/UVM
Richard Hammond The Boeing Company ALT/UVM
Andreas Mastorakis GE Aviation UVM
Brett Hemingway BAE Systems – Military & Air Information (MAI) UVM
Angelina Mendoza Goodrich (UTAS) ALT/UVM
Mark Jackson Triumph Group, Inc. UVM
Larry Olsen Northrop Grumman Corp. UVM
22
Rick Ouellette The Boeing Company ALT/UVM Keith Panuska Lockheed Martin VCH/UVM Jeremy Phillips Cessna Aircraft Co. UVM Alberto Portal EADS-CASA MTAD UVM Sally Spindor Triumph Group Inc. ALT/UVM Kenneth Sposato Triumph Aerostructures – VAD ALT/UVM Anne Stanley Bombardier, Inc. UVM Frank Thomas Bombardier, Inc. ALT/UVM Justin Walker Spirit AeroSystems ALT/UVM Yuan Yahui COMAC UVM Composites continued on next page
COMPOSITES (COMP) (Rebekah Braun +1 724 772 7116,
[email protected]) TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Kevin Brennan Swift Engineering, Inc. SVM
Mike Guthmiller Applied Aerospace Structures SVM
David Scott Hitco Carbon Composites SVM
Jim Brown Hexcel Composites SVM
Rick Heise Swift Engineering, Inc. ALT/SVM
Kevin Snyder Composite Horizons SVM
Pierangelo Campagna EXOVA (UK) Limited SVM
Tommie Lakes GKN Aerospace SVM
Vitorio Stana Avcorp Industries Inc. SVM
Patrick Durkin TE Wire Liaison
Breton Lutz DuPont Vespel Parts & Shapes SVM
Arno Toelkes Euro-Composites SVM
Ben Flores Applied Aerospace Structures ALT/SVM
Debra Maier ATK Space Systems – Clearfield SVM
23
CONVENTIONAL MACHINING AS A SPECIAL PROCESS (CMSP) (Andy Statham +44 133 286 9276,
[email protected]) The Conventional Machining as a Special Process (CMSP) Task Group is conducting audits to demonstrate compliance to the AC7126 series of checklists for conventional machining as a special process. These audits address the following types of processes: • • •
Holemaking Turning Grinding
• Broaching • Milling • Edge Treatment TASK GROUP VOTING MEMBERS
Subscriber Voting Members Ken Abram Honeywell Aerospace CHR/UVM (Chair – October 2011) Ertem Aygin GE Aviation ALT/UVM Zeljko Calija Goodrich (UTAS) UVM
Philippe Durand Eurocopter UVM
John Pfeiffer GE Aviation SEC/UVM
Vincent Dutilh SAFRAN Group UVM
Alex Pohoata Honeywell Aerospace ALT/UVM
Mark Gleason GE Aviation ALT/UVM
Tim Sowa Rolls-Royce UVM
Marco Cherubini Avio UVM
Wayne Hillstead 309th Maintenance Wing-Hill AFB UVM
Caroline Des Landes Bombardier Inc. UVM
Scott Maitland Goodrich (UTAS) ALT/UVM
Supplier Voting Members Tim Crowe Hunting Dearborn Inc. SVM
Brad Gould Hunting Dearborn Inc. ALT/SVM
24
James Jensen Moeller Manufacturing Co SVM
ELASTOMER SEALS (SEALS) (Keith Purnell +1 724 772 8685,
[email protected]) The Elastomer Seals Task Group is conducting product audits to demonstrate compliance to AC7115. TASK GROUP VOTING MEMBERS Subscriber Voting Members Michelle Brunet The Boeing Company ALT/UVM
Jeffrey Kingsley Air Force UVM/GVT
Brent Clothier Cessna Aircraft Company UVM
Manuel Koucouthakis Honeywell Aerospace CHR/UVM (Chair – October 2005)
Kent DeFranco Lockheed Martin Corporation UVM
Benjamin Shaw Rolls-Royce UVM
Perry Freeman The Boeing Company UVM
Bob Teegarden Honeywell Aerospace ALT/UVM
Marc Gage Hamilton Sundstrand UVM
Estrella Watson Goodrich (UTAS) VCH/UVM
David Grulke Hamilton Sundstrand ALT/UVM Supplier Voting Members Peter Holden Precision Polymer Engineering Ltd. SVM
Dorothy Kern Parker Hannifin ALT/SVM
John Hudspeth International Seal SVM
Royce McDaniel Parker Hannifin SVM
25
ELECTRONICS (ETG) (Bill Dumas +1 724 772 8673,
[email protected]) (Susan Frailey +1 618 615 4478,
[email protected]) The Electronics Task Group is conducting electronics audits to demonstrate compliance to AC7119 Printed Boards, AC7120 Circuit Card Assemblies, and AC7121 Cable and Harness Assemblies. TASK GROUP VOTING MEMBERS Subscriber Voting Members William Cardinal Hamilton Sundstrand UVM
Philippe Larivee Thales ALT/UVM
Norberto Roiz-Lafuente EADS CASA UVM
Frank Cristofol BAE Systems Inc. UVM
Nathalie LeFevre SAFRAN Group UVM
Richard Rumas Honeywell Aerospace UVM/VCH
Roy Garside Rolls-Royce UVM
Nathalie LeTran Airbus ALT/UVM
Suzanne Steketee Ball Aerospace & Technologies UVM
Jerome Hery SAFRAN Group ALT/UVM
John Mastorides Honeywell Aerospace ALT/UVM/SEC
Magali Vigier Airbus UVM
Eric Lacourt Thales UVM
Scott Meyer Goodrich (UTAS) CHR/UVM (Chair-February 2012)
Barbara Waller Raytheon Co UVM
Cristiano Bazzi Somacis SpA SVM
Donna Lopez Cristek Interconnects, Inc SVM
Denise Ryves STS Defense Limited SVM
Paul Comer Graphic Plc SVM
Ishwar Mathur IEC Electronics Corp. - Newark SVM
Douglas Schueller AbelConn LLC SVM
Stephan Gehrke Meggitt SA SVM
Jeremy Needs Ultra Electronics ALT/SVM
Tim Voeller Logic PD, Inc SVM
Ian Hopps Ultra Electronics SVM
Mark Northrup IEC Electronics Corp. – Albuquerque SVM
Jennifer Wagner Ducommun LaBarge Tech SVM
Supplier Voting Members
26
FLUID DISTRIBUTION SYSTEMS (FLU) (Keith Purnell +1 724 772 8685,
[email protected]) The Fluid Distribution Standards Task Group is conducting product audits to demonstrate compliance to AC7112, AC7112/1, AC7112/2, AC7112/3, AC7112/4, AC7112/6 and AC7123. These audits address the following: • Hose Manufacturing • Hose Assembly • Fittings & Other Machined Components • Value Added Hose Assembly Distributors • Couplings • Titanium Tubing Manufacturers TASK GROUP VOTING MEMBERS Subscriber Voting Members Keith Allen Rolls-Royce PLC ALT/UVM Joe Bebey The Boeing Company ALT/UVM Samuel Buri The Boeing Company VCH/UVM Terence Chin NAVAIR UVM/GVT
Supplier Voting Members Mark Scatoloni Faber Enterprises Inc SVM Michael Schleckman Voss Industries SVM
Mike King Northrop Grumman – SSSD Aerospace Systems UVM
Mark Scott The Boeing Company UVM Dan Smith GE Aviation UVM
Erwin Oman Bombardier UVM Mark Paul Rolls-Royce UVM Robert Schreiber The Boeing Company CHR/UVM (Chair – September 2008) +1 610 591 7660
Chris Schofield Hydraflow SVM Phillip Wade Smiths Tubular Systems Laconia SVM
27
HEAT TREATING (HT) (Jerry Aston +44 870 350 5011,
[email protected]) (Marcel Cuperman +1 724 772 8678,
[email protected]) (Rob Hoeth +1 724 772 8657,
[email protected]) (Stan Revers +1 724 772 7157,
[email protected]) The Heat Treating Task Group has developed AC7102 requirements and checklists that include the following: • • • •
Metal Systems – Carbon & Alloy Steels, Stainless Steel, pH Stainless Steels, Cast Iron, Aluminum Alloys, Titanium Alloys, Heat Resisting Alloys, Magnesium, Other Nonferrous Metals Heat Treating Process – Normalizing, Annealing, Hardening and Tempering, Solution Heat Treating, Aging, Carburizing, Nitriding, Stress Relieving, Vacuum Brazing, Induction Hardening Heat Treating Equipment – Furnace, Pyrometry, Instrumentation, Atmospheric Control System Brazing
TASK GROUP VOTING MEMBERS Subscriber Voting Members Silvia Baeza Triumph Group, Inc. ALT/UVM Shaun Brewin Rolls-Royce Corp ALT/UVM Bruce Brownfield Lockheed Martin Corp. SEC/UVM Frank Brungs MTU Aero Engines GmbH UVM Michael Corsino Hamilton Sundstrand UVM
Textron Systems UVM Laurent Geerts SONACA UVM Christina Gonzalez-Perez EADS CASA UVM
Bernd Daniels MTU Aero Engines GmbH ALT/UVM
Andrew Hopkins BAE Systems (MAI) UVM
Martin Day Honeywell Aerospace UVM
Billy Hulse Spirit AeroSystems Inc ALT/UVM
Peter Edwards Airbus ALT/UVM
David Isenberg Parker Aerospace Group UVM
Andreas Elbs Liebherr-Aerospace SAS UVM
Kent Johnson th 309 Maintenance Wing-Hill AFB ALT/UVM
Mark Emerson Rolls-Royce Corp UVM Sergio Esposito Alenia Aermacchi S.p.A UVM
Hongping Li COMAC ALT/UVM
Gary Sigmon th 309 Maintenance Wing-Hill AFB UVM
William Macias Goodrich (UTAS) ALT/UVM
Gerald Harvey Triumph Group, Inc. UVM Wayne Hillstead th 309 Maintenance Wing-Hill AFB ALT/UVM
Mike Shen Honeywell Aerospace ALT/UVM
Weitao Ma COMAC UVM
Peter Hammarbo GKN Aerospace Sweden AB UVM
David Damasauskas Spirit AeroSystems Inc UVM
Marc-Andre Lefebvre Heroux Devtek Inc. UVM
Doug Matson The Boeing Company UVM Thomas Norris Goodrich (UTAS) CHR/UVM (Chair- October 2012) +1 858-436-5443 Eddy Pham Northrop Grumman Corporation UVM Sunder Rajan Raytheon Co UVM Chris Reilly Hamilton Sundstrand ALT/UVM Alex Richez Airbus UVM
Jeff Koss The Boeing Company ALT/UVM
Simon Scott BAE Systems (MAI) ALT/UVM
Serge Labbe Heroux Devtek Inc. ALT/UVM
Robert Faticanti
28
David Soong Pratt & Whitney UVM William Stewart Bombardier Inc. UVM Marc Taillandier Eurocopter UVM Jeff Thyssen GE Aviation UVM Louis Tremblay Bombardier Inc. ALT/UVM Cyril Vernault SAFRAN Group VCH/UVM Tom Wilson Bombardier Inc. ALT/UVM Grzegorz Wryk Rolls-Royce (AEC) ALT/UVM Ji Yuan COMAC ALT/UVM HEAT TREATING continued on next page
HEAT TREATING (HT) (Jerry Aston +44 870 350 5011,
[email protected]) (Marcel Cuperman +1 724 772 8678,
[email protected]) (Rob Hoeth +1 724 772 8657,
[email protected]) (Stan Revers +1 724 772 7157,
[email protected]) TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Griff Braddock Braddock Metallurgical Inc SVM
John Kunkle Alcoa Inc. SVM
Michael Niedzinski Constellium France SVM
Michael Brandt Alcoa Inc. SVM
Bob Lehnen Bodycote Thermal Processing SVM
Daniel Reeves Consolidated Foundries Inc SVM
Mark Brown Kaman Aerospace Corp SVM
Johanna Lisa Valley Metal Treating SVM
Stuart Sherman Metallurgical Processing Inc. SVM
Alexander Klyuch Blades Technology Ltd SVM
Vincent Musa Technetics Group Columbia SVM
29
MATERIALS TESTING LABORATORIES (MTL) (Kevin Wetzel, +1 724 772 8652,
[email protected]) (Jim Lewis +1 724 772 8688,
[email protected]) (Rob Hoeth +1 724 772 8657,
[email protected]) (Robert Lizewski, +1 724 772 8681,
[email protected]) This task group has published the checklists (AC7101, AC7101/1-9, AC7101/11, & AC7006) for Materials Testing Laboratories. Types of activities being accredited: • • •
ISO/IEC 17025 Requirements Chemical Testing Mechanical Testing
• • •
Metallography (Micro & Macro) Hardness Corrosion
• • •
Microhardness DTA Test Specimen Preparation
TASK GROUP VOTING MEMBERS Subscriber Voting Members Muriel Auzanne Airbus UVM
Kevin Elston Spirit AeroSystems UVM
Olivier Molinas Eurocopter UVM
Pietro Bonarrigo Bombardier Inc. UVM
Colin Fletcher Bell Helicopter Textron UVM
Thomas Brendel MTU Aero Engines GmbH ALT/UVM
Jose Gilson SAFRAN Group UVM
Tim Myers Honeywell Aerospace CHR/UVM (Chair – October 2011) +1 602 284 5637
[email protected]
Robert Clark Eaton Aerospace UVM
John Haddock BAE Systems Military Air & Information [MAI] UVM
Linda Cook Rolls-Royce ALT/UVM George Coste SAFRAN Group ALT/UVM Bill Davis GE Aviation ALT/UVM Doug Deaton GE Aviation UVM Uta Dietrich AIRBUS S.A.S. France ALT/UVM George Doviak Goodrich (UTAS) UVM
Jim Hartman Honeywell Aerospace ALT/UVM Keith Kastner Cessna Aircraft Company ALT/UVM John Knie The Boeing Company ALT/UVM Frank Lennert The Boeing Company UVM Patricia Matkowski The Boeing Company ALT/UVM Jennifer McKeegan Cessna Aircraft Company UVM
30
Burcu Okur Duransoy GE Aviation ALT/UVM Amanda Rickman Raytheon Co. VCH/SEC/UVM Lindsay Schurle Spirit Aerosystems ALT/UVM Christian Schwaminger MTU Aero Engines GmbH UVM Armen Talverdian The Boeing Company ALT/UVM Verl Wisehart Rolls-Royce UVM MATERIALS TESTING LABORATORIES continued on next page
MATERIALS TESTING LABORATORIES (MTL) (Kevin Wetzel, +1 724 772 8652,
[email protected]) (Jim Lewis +1 724 772 8688,
[email protected]) (Rob Hoeth +1 724 772 8657,
[email protected]) (Robert Lizewski, +1 724 772 8681,
[email protected]) TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Siobhan Alekna SPS Technologies SVM
Bryan Engel Esco Turbine Technologies SVM
James D. Rossi Westmoreland Testing SVM
Frank Anderson The M&P Lab Inc. SVM
Kay Fisher Bohler Edelstahl GmnH & Co KG SVM
Ray Schiltz AADFW SVM
Corwyn Berger Exova, Inc. SVM
Stephan Greimers Thyssen Krupp VDM GmbH SVM
Derek Sicotte Dirats Laboratories ALT/SVM
Mary Lee Bogensperger PCC Airfoils LLC SVM
Brian Griffin Howmet Research Corp. SVM
Byron Skillings ATI Ladish Forging SVM
Wayne Brege Cannon Muskegon SVM
Bryan Hall NSL Analytical Services Inc. SVM
Harvey Smith IncoTest SVM
Philip Bretz Metcut Research Associates, Inc. ALT/SVM
Anil Joshi Praxair Surface Technologies SVM
T. Rao Tipirneni Long Island Testing Labs. Inc. SVM
Matthew Chamberlain-Webber Timet UK Limited SVM
David Luoni Element Newtown SVM
Jennifer Tret Sherry Laboratories of Indiana LLC SVM
John Chir Latrobe Specialty Steel SVM
Jacob PadrulConstellium France SVM
Jeff Viney Metcut Research Associates, Inc. SVM
Deena Crossmore IMR Test Labs SVM Eric E. Dirats Dirats Laboratories SVM
Frank Peszka Laboratory Testing Inc. SVM Annette O’Connell Haynes International Inc. SVM Pierre-Emmanuel Richy Aubert & Duval SVM
31
Kevin VonScio Perryman Company SVM Margaret Willis ATI Allvac Monroe SVM Jason Wright Metals Technology, Inc. SVM
MEASUREMENT & INSPECTION (M&I) (James Bennett +1 724 772 8651,
[email protected]) TASK GROUP VOTING MEMBERS Subscriber Voting Members Lance Christie Sikorsky Aircraft UVM
Phil Bamforth Rolls-Royce CHR/UVM (Chair- October 2012) +44 1332 240209
Supplier Voting Members Brad Gould Hunting Dearborn SVM
32
NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT (NMSE) (Rick Sovich +1 724 772 8689,
[email protected]) The Nonconventional Machining and Surface Enhancement (NMSE) Task Group is conducting audits to demonstrate compliance to the AC7116 series of checklists for nonconventional machining and the AC7117 checklist for surface enhancement. These audits address the following types of processes: Nonconventional Machining • Electrochemical Machining • Electrochemical Grinding
•
•
Electrical Discharge Machining – Fast Hole, Sinker, Wire, EC Drilling Laser Beam Machining – Cutting, Drilling
TASK GROUP VOTING MEMBERS Nonconventional Machining Sub-Task Group Subscriber Voting Members Ken Abram Honeywell Aerospace ALT/UVM
Dan Loveless Parker Aeorspace UVM
Holger Polanetzki MTU Aero Engines GmbH ALT/UVM
Zeljko Calija Goodrich (UTAS) UVM
David McCallister UTC/Pratt & Whitney SEC/UVM
Jeffrey Robb Cessna Aircraft Co. UVM
Tara Campbell Rolls Royce ALT/UVM
Gudrun Muehlbauer MTU Aero Engines GmbH UVM
Greg Syvertson Bell Helicopter Textron UVM
Vincenzo DeRosa Alenia Aermacchi S.p.A. UVM
John Pfeiffer GE Aviation ALT/UVM
Donald Williams GE Aviation UVM
Peter Edwards Airbus ALT/UVM
Jeremy Phillips Cessna Aircraft Co. ALT/UVM
Paul Woolley Rolls-Royce VCH/UVM
Harold Finch Spirit AeroSystems, Inc. ALT/UVM
Alex Pohoata Honeywell Aerospace CHR/UVM (Chair – January 2013) +1 602 231 4134
Evren Yuksekkaya GE Aviation ALT/UVM
Tim Scarlett Danville Metal Stamping Co., Inc. SVM
Mark Singer Kessington Machine SVM
Simon Long Airbus UVM
Supplier Voting Members Jeffrey Kupis Micro-Tronics, Inc. SVM
33
NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT continued on next page
NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT (NMSE) (Rick Sovich +1 724 772 8689,
[email protected]) TASK GROUP VOTING MEMBERS CONTINUED Surface Enhancement Sub-Task Group Surface Enhancement • Automated Peening • Computer Controlled Peening • Flapper Peening
• •
Manual Peening Peen Forming
Subscriber Voting Members Ken Abram Honeywell Aerospace ALT/UVM
Marc Andre-LeFebvre Heroux Devtek UVM
Holger Polanetzki MTU Aero Engines GmbH ALT/UVM
Silvia Baeza Triumph Group Inc. UVM
Simon Long Airbus UVM
K. T. Quader The Boeing Company UVM
Zeljko Calija Goodrich (UTAS) UVM
Dan Loveless Parker Aerospace UVM
Jeffrey Robb Cessna Aircraft Co. ALT/UVM
Tara Campbell Rolls Royce ALT/UVM
David McCallister UTC/Pratt & Whitney SEC/UVM
Kenneth Sposato Triumph Aerostructures – VAD ALT/UVM
Vincenzo DeRosa Alenia Aermacchi S.p.A. UVM
Gudrun Muehlbauer MTU Aero Engines GmbH UVM
Greg Syvertson Bell Helicopter Textron UVM
Peter Edwards Airbus ALT/UVM
John Pfeiffer GE Aviation UVM
Donald Williams GE Aviation ALT/UVM
Harold Finch Spirit AeroSystems, Inc. ALT/UVM
Jeremy Phillips Cessna Aircraft Co. ALT/UVM
Paul Woolley Rolls-Royce VCH/UVM
Glen Heide The Boeing Company ALT/UVM
Alex Pohoata Honeywell Aerospace CHR/UVM (Chair – January 2013) +1 602 231 4134
Evren Yuksekkaya GE Aviation ALT/UVM
Serge Labbe Heroux Devtek ALT/UVM
Supplier Voting Members Steve Connally Curtis Wright Surface Technologies SVM
Dave Jones 3P Processing, Inc. SVM Dawn Stokes PTI Industries Inc. SVM
34
Yoshiomi Sukesada Asahi Kinzoku SVM
NONDESTRUCTIVE TESTING (NDT) (Mark Aubele, +1 724 772 8654,
[email protected]) (Jim Bennett, +1 724 772 8651,
[email protected]) (Phil Ford, +44 (0) 1443 225545
[email protected]) (Mike Gutridge, +1 740 587 9841,
[email protected]) (Andy Statham +44 133 286 9276,
[email protected]) (David Marcyjanik, +1 724 772 7113,
[email protected]) The Nondestructive Testing Task Group is currently reviewing audit reports and making recommendations to Nadcap Council on accreditation for the following tests: • Magnetic Particle • Ultrasonic • Eddy Current • Liquid Penetrant • Radiography
TASK GROUP VOTING MEMBERS Subscriber Voting Members Charles Alvarez Goodrich (UTAS) ALT/UVM
Roger Eckart Hamilton Sundstrand /IL ALT/UVM
Michael Mitchell Hamilton Sundstrand UVM
Steve Bauer Northrop Grumman Corp. UVM
Jim Fowler Pratt & Whitney ALT/UVM
Dale Norwood Parker Aerospace Group UVM
Philippe Beck Eurocopter UVM
Steven Garner Eaton Aerospace UVM
Gary O’Neill Parker Aerospace Group ALT/UVM
Mitch Birzer General Dynamics Corp UVM
Jim Graves Rolls-Royce ALT/UVM
Robert Rainone Goodrich (UTAS) ALT/UVM
Alain Bouchet SAFRAN Group UVM
Luis Grijalva Lockheed Martin Corporation UVM
Robert Reynolds The Boeing Company - BDS ALT/UVM
Juergen Burchards MTU Aero Engines GmbH UVM
Thomas Mike Guinn Bell Helicopter Textron UVM
David N. Royce Pratt & Whitney VCH/UVM
Manuel Cabrera Jr. The Boeing Company ALT/UVM
Robert Hogan Honeywell Aerospace Phoenix UVM
Victor Schonberger Israel Aerospace Industries ALT/UVM
Fangmei Chu Honeywell Aerospace ALT/UVM Mike Clark Sikorksky Aircraft UVM Massimo Colombo Avio UVM Richard Costantino Goodrich (UTAS) UVM Michael Daehling Cessna Aircraft Company ALT/UVM Timothy Doane 309th Maintenance Wing – Hill AFB UVM Chris Dootson BAE Systems – Military & Air Information (MAI) UVM
Ed Hohman Bell Helicopter Textron UVM
Bobby Scott Bombardier, Inc. CHR/UVM (Chair – October 2012)
Scott Iby Hamilton Sundstrand ALT/UVM
Uri Sol Israel Aerospace Industries UVM
Dr. Hans-Hermann Kopp MTU Aero Engines ALT/UVM
Christopher Stevenson Rolls-Royce UVM
Marc-André Lefebvre Heroux Devtek Inc ALT/UVM
Terho Sulkupuro GKN Aerospace Sweden AB UVM
Donald MacLean Raytheon Co UVM
D. Scott Sullivan Honeywell Aerospace – Tempe UVM Phoenix ALT/UVM
Steve McCool Honeywell Aerospace UVM Luigi Merletti AgustaWestland UVM
35
Pat Thompson Honeywell Aerospace – Torrance UVM Phoenix ALT/UVM Dominique Tomasso SAFRAN Group ALT/UVM Walter Tonizzo Heroux Devtek Inc UVM Peter Torelli The Boeing Company UVM Louis Truckley The Boeing Company ALT/UVM David H. Vaughn Spirit AeroSystems Inc UVM Tony Warren Airbus S.A.S – UK SEC/UVM Frank Whittaker Spirit AeroSystems Inc ALT/UVM Sean Wood Triumph Group UVM Jingiu Zhou Comac UVM NONDESTRUCTIVE TESTING continued on next page
NONDESTRUCTIVE TESTING (NDT) (Mark Aubele, +1 724 772 8654,
[email protected]) (Jim Bennett, +1 724 772 8651,
[email protected]) (Phil Ford, +44 870 350 5011,
[email protected]) (Mike Gutridge, +1 740 587 9841,
[email protected]) (Andy Statham +44 133 286 9276,
[email protected]) (David Marcyjanik, +1 724 772 7113,
[email protected])
TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Christopher Andersen PCC Structurals Inc. LPC SVM
Paul Evans James Fisher IMS Ltd. SVM
Blair James O’Connell Precision Castparts Corp SVM
Mike Ashton Hexcel Kent SVM
Richard Gasset LISI Aerospace - Torrance SVM
Patrick O’Leary Nu-Pro Limited SVM
Andy Bakewell E. M. Inspection Co Ltd SVM
David Gray Mitchell Laboratories Inc SVM
Mark Pompe West Penn Testing Group ALT/SVM
Shawn Ballou Wyman SVM
Robert Henchar X-R-I Testing SVM
Jonathan Pugh Exova (UK) Limited SVM
Mario Bianchi BYTEST SRL SVM
Helmuth Hoeller FACC SVM
Steve Radelich Jorgensen Forge SVM
Martyn Bills Exova (UK) Limited ALT/SVM
Jeff Jones Alloy Processing Inc SVM
Cindy Roth TEAM Industrial Services TCM Division-Cincinnati SVM
N. David Campbell West Penn Testing Group SVM
Richard King New Hampshire Ball Bearings Inc. SVM
Massimo Capriolo BYTEST SRL ALT/SVM
Mike Kocka Arrow Gear Company SVM
Claude Chambon Aubert & Duval SVM
Josef Maier Bohler Edelstahl GmbH & Co KG SVM
Dwayne Cooper RTI International Metals Inc SVM
John Massie TurboCombustor Technology SVM
Robert Custer AAA Plating & Inspection, Inc. SVM
William McKessy Alcoa Howmet SVM David Mitchell Composite Inspection Solutions SVM
36
Guy Saenz Hi-Tech Metal Finishing SVM Michael Steele Northstar Aerospace Chicago Inc. SVM Gary White Orbit Industries Inc SVM Rob Yocum Imagineering Finishing Tech SVM
NON METALLIC MATERIALS MANUFACTURING (NMMM) (Rebekah Braun +1 724 772 7116,
[email protected]) The Non Metallic Materials Manufacturing Task Group is conducting audits to demonstrate compliance to the PRI AC7124. These audits address the Nadcap requirements for the following processes: •
•
Resin Manufacturing
Prepeg Manufacturing
•
Adhesive Manufacturing
TASK GROUP VOTING MEMBERS Subscriber Voting Members Monica Alcala Honeywell Aerospace ALT/UVM
Joseph DeVirgilio The Boeing Company ALT/UVM
Mark Jackson Triumph Group Inc. UVM
Keith Panuska Lockheed Martin VCH/UVM
Peter Atwell AIRBUS S.A.S. SEC/UVM
Kevin Dowling Spirit AeroSystems UVM
Mike Kahler Ball Aerospace & Technologies UVM
Alberto Portal EADS-CASA MTAD UVM
Muriel Auzanne AIRBUS S.A.S. ALT/UVM
Joe Dwyer Rolls-Royce UVM
Michael Bemis Goodrich (UTAS) UVM
Achim Enzmann Eurocopter UVM
Laura Benedetti SAFRAN Group ALT/UVM
Marcel Francois SAFRAN Group ALT/UVM
Tara Campbell Rolls- Royce ALT/UVM
Olivier Goupillon Eurocopter ALT/UVM
Claude Chevalier SAFRAN Group UVM
Steve Grunshaw BAE Systems-Military Air Solutions ALT/UVM
Ray Cleghorn The Boeing Company ALT/UVM
John Key Jr. Bell Helicopter CHR/UVM (Chair – October 2012) Betty Kocsis Honeywell Aerospace UVM Frank Lennert The Boeing Company ALT/UVM Lance Loeks The Boeing Company UVM Leah Markowitz Honeywell Aerospace ALT/UVM
Brett Hemingway BAE Systems-Military & Air Information (MAI) UVM
Andreas Mastorakis GE Aviation UVM
Jay Berndt Toray Composites America Inc ALT/SVM
Rick Price Park Aerospace Technologies Corp SVM
Steve Schrameyer Cytec Engineered Materials SVM
Jim Brown Hexcel Composites SVM
Don Russell Toray Composites America Inc ALT/SVM
Arno Toelkes Euro-Composites SVM
David Constable AIRBUS S.A.S. ALT/UVM
Supplier Voting Members
Jim Ferrel Cytec Engineered Materials ALT/SVM
Nancy Vancil Toray Carbon Fibers America Inc. SVM
Colleen Saunders Toray Composites America Inc SVM
37
Sally Spindor Triumph Group Inc. ALT/UVM Ken Sposato Triumph Group Inc. ALT/UVM Anne Stanley Bombardier, Inc. UVM Justin Walker Spirit AeroSystems ALT/UVM Yuan Yahui COMAC UVM
NON METALLIC MATERIALS TESTING (NMMT) (Rebekah Braun +1 724 772 7116,
[email protected]) The Non Metallic Materials Testing Task Group is conducting audits to demonstrate compliance to the PRI AC7122-I for Independent Testing Laboratories, PRI AC7122-P for Part Manufacturers Captive Laboratories and PRI AC7122-R for Raw Materials Manufacturers Captive Laboratories. These audits address the Nadcap requirements for the testing of Class A: Composites and Class B: Adhesive/Adhesive Primer • •
• •
Mechanical Testing Physical Testing
Chemical Testing Thermal Testing
•
Flammability Testing
TASK GROUP VOTING MEMBERS Subscriber Voting Members Monica Alcala Honeywell Aerospace ALT/UVM
Joseph DeVirgilio The Boeing Company ALT/UVM
Mark Jackson Triumph Group Inc. UVM
Keith Panuska Lockheed Martin VCH/UVM
Peter Atwell AIRBUS S.A.S. SEC/UVM
Kevin Dowling Spirit AeroSystems UVM
Mike Kahler Ball Aerospace & Technologies UVM
Jeremy Phillips Cessna Aircraft Company UVM
Muriel Auzanne AIRBUS S.A.S. ALT/UVM
Patrick Dunleavy SAFRAN Group ALT/UVM
Michael Bemis Goodrich (UTAS) UVM
Joe Dwyer Rolls-Royce UVM
Laura Benedetti SAFRAN Group ALT/UVM
Achim Enzmann Eurocopter UVM
Peter Bonarrigo Bombardier, Inc. ALT/UVM
Marcel Francois SAFRAN Group ALT/UVM
Tara Campbell Rolls- Royce ALT/UVM
Olivier Goupillon Eurocopter ALT/UVM
Claude Chevalier SAFRAN Group UVM
Steve Grunshaw BAE Systems-Military & Air Solutions ALT/UVM
Ray Cleghorn The Boeing Company ALT/UVM
John Key Jr. Bell Helicopter CHR/UVM (Chair – October 2012) Betty Kocsis Honeywell Aerospace UVM Frank Lennert The Boeing Company ALT/UVM Lance Loeks The Boeing Company UVM Leah Markowitz Honeywell Aerospace ALT/UVM Andreas Mastorakis GE Aviation UVM
Alberto Portal EADS-CASA MTAD UVM Sally Spindor Triumph Group, Inc. ALT/UVM Kenneth Sposato Triumph Group Inc. ALT/UVM Anne Stanley Bombardier, Inc. UVM Justin Walker Spirit AeroSystems ALT/UVM Yuan Yahui COMAC UVM
Brett Hemingway BAE Systems-Military & Air Information (MAI) UVM
Larry Olsen Northrop Grumman Corp. UVM
Paul Braun Cincinnati Testing Labs SVM
Jim Ferrel Cytec Engineered Materials ALT/SVM
John Moylan Delsen Testing Labs SVM
Colleen Saunders Toray Composites SVM
Jim Brown Hexcel Composites SVM
Dennis Kidd Cincinnati Testing Labs Inc. ALT/SVM
Rick Price Park Aerospace Technologies Corp SVM
Steve Schrameyer Cytec Engineered Materials SVM
Pierangelo Campagna EXOVA (UK) Limited SVM
Tommie Lakes GKN Aerospace SVM
William DeLaurier IMR Test Labs SVM
Brian McCrory Delsen Testing Labs ALT/SVM
David Constable AIRBUS S.A.S. ALT/UVM
Supplier Voting Members
Jim Rossi Westmoreland Mechanical Testing SVM Don Russell Toray Composites ALT/SVM
38
Nancy Vancil Toray Carbon Fibers America Inc. SVM Nicolas Vetel Critt-Materiaux MPC SVM
SEALANTS (SLT) (Keith Purnell +1 724 772 8685,
[email protected]) The Nadcap Sealants program consists of two types of audits: (1) Sealant Manufacturers: SAE Aerospace Standard AS7200/1 - on-site inspection of aerospace sealant manufacturers. (2) Value-Added Sealant Distributors: SAE Aerospace Standard AS7202. Testing and fabrication techniques included in the audit criteria: • • •
• • •
Two-Part Polysulfide Sealants Silicones and Fluorosilicones Polyurethanes
Adhesion Promoters Coatings and Coating Processes Peel Panels, Shear Specimens, Tensile Bars
TASK GROUP VOTING MEMBERS Subscriber Voting Members Jerry Brown Lockheed Martin Corp. ALT/UVM
Jeffrey Kingsley Air Force UVM/GVT
Raj Nagarajan General Dynamics Corp. UVM
Brent Clothier Cessna Aircraft Company VCH/UVM
Diane Kleinschmidt NAVAIR UVM/GVT
Estrella Watson Goodrich (UTAS) SEC/UVM
Kent DeFranco Lockheed Martin Corp. CHR/UVM (Chair – December 2011)
Manuel Koucouthakis Honeywell Aerodapce UVM
Aleck Featherston Bell Helicopter Textron UVM Supplier Voting Members Jim Carney National Sealants & Lubricants SVM Suzanna DeMoss 3M Company Aerospace and Aircraft Maintenance Department SVM Derek Hughes PPG Aerospace PRC DeSoto ALT/SVM John Lane Integral Products Inc. SVM
Angelina Mendoza Goodrich (UTAS) ALT/UVM
Josh Mazin Flamemaster Corp ASVM Philip Shackley PPG Aerospace/PRC DeSoto Intl. SVM Linda Smith Flamemaster Corporation SVM Jeff Steele D Aircraft Products Inc. SVM Randy Wilt Graco Supply & Integrated Services SVM
39
Jonathan Zook 3M Company Aerospace and Aircraft Maintenance Department ALT/SVM
WELDING (WLD) (Ian Simpson +44 1332 869272,
[email protected]) (Mike Gutridge +1 740 587 9841,
[email protected]) (Stan Revers +44 1332 869271,
[email protected]) Process specific requirements have been developed by the Welding Task Group and are contained in the AC7110 series of checklists. Welding processes covered include: • • • • •
Diffusion Welding Electron Beam Welding Flash Welding Friction/Inertia Welding Fusion Welding
• • • •
Laser Welding Percussion Stud Welding Resistance Welding Torch/Induction Brazing
•
•
Welder/Welding Operator Qualification Evaluation of Welds
TASK GROUP VOTING MEMBERS Subscriber Voting Members Robbie Adams Honeywell ALT/UVM
Larry Hamanishi The Boeing Company ALT/UVM
Holger Krueger Airbus UVM
Earl Pruett Lockheed Martin Corp UVM
Osawonuyi Agbonkonkon Parker Hannifin Corp ALT/UVM
Milan Hanyk Honeywell Aerospace UVM
Mario Leclerc Bombardier Inc. UVM
Brian Ricks Raytheon Company ALT/UVM
Carlos Alfaro Eaton Aerospace ALT/UVM
Les Helleman GE Aviation ALT/UVM/ALT/SEC
Donald Lenhart Spirit AeroSystems Inc UVM
John Sanders Hamilton Sundstrand UVM
Gary Coleman The Boeing Company ALT/UVM
Scott Iby Hamilton Sundstrand ALT/UVM
Dag Lindland Pratt & Whitney UVM
Paul Slater Rockwell Collins Inc MBR
Caroline DesLandes Bombardier Inc ALT/UVM
Michael Irvin The Boeing Company UVM
Nick Magnapera BAE Systems Inc. UVM
Ken Sposato Triumph Group UVM
Andrew Dewhurst BAE Systems Air & Information (MAI) ALT/UVM
Jerry Isoaho GKN Aerospace Sweden AB UVM
Scott Maitland Goodrich (UTAS) UVM
Tim Storm Parker Hannifin Corp UVM
Günther Jakobi Rolls-Royce ALT/UVM
Lyle Morris Raytheon Company UVM
David Struckman Eaton Aerospace UVM
Hugh Jamison Bombardier inc ALT/UVM
Rick Peterson Rockwell Collins Inc MBR
Steve Tooley Rolls-Royce VCH/UVM
Keith Kastner Cessna Aircraft Company UVM
Jeremy Phillips Cessna Aircraft Company ALT/UVM
Gary Winters Northrop Grumman Corp UVM
Ralph Kropp MTU Aero Engines GmbH CHR/UVM (Chair – July 2008) +49 89 1489 4035
Marco Luigi Poletto Alenia Aermacchi SpA UVM
Randy Hite PCC Structurals Inc. LPC SVM
Melinda Mitton Advance Welding ALT/SVM
Mike Schleckman Voss Industries Inc SVM
Christopher Kielb Advance Welding SVM
Angelo Monzo Barnes Aerospace ALT/SVM
Jackie Sternot PAKO, Inc. SVM
David Osenar Pako Inc. ALT/SVM
Gigi Streeter Barnes Aerospace SVM
Chris English GE Aviation SEC/UVM Harold Finch Spirit AeroSystems Inc ALT/UVM Bob Fletcher BAE Systems Air & Information (MAI) UVM
Supplier Voting Members
40
Guido Witting Heggemann AG SVM
