Ozlite LED Energy Efficient LED Streetlight
Efficient Effective Ergonomic Economic Excellent
LED Decorative Street Light Streetworx 191 Liverpool Rd Kilsyth, Victoria Australia 3137 T 1800 131 366 F (03) 9761 8035
[email protected] streetworx.com.au
Specification Ultimate quality one piece heavy duty seamless housing of 3mm aluminium. Vandal resistant version available in 6mm with additional polycarbonate deflector shield over lens. 5 stage powder coat finish with high reflectance white lining.
Ozlite LED
Optional electronic PE Cell in threaded sealed weatherproof enclosure. Stainless steel toggle latches and ¼ turn fasteners around the silicone labyrinth seal, provide a secure watertight interface, with easy service access. High output plug-in LED light source module with lens sealed to IP66 by an endless silicone gasket. Exicato® LED module, IP66 rated. LexaLite® refractor optical lens system of PMMA with integral diffuser.
Application Streetworx Ozlite LED provides the solution to the historical nature of failures of similar decorative lanterns. The entire Ozlite LED body is made from a single piece of 3mm thickness spun aluminium, providing a full seamless construction of the outer shell. The body will not rust, rivets and screws are non corrosive, nothing to fall apart and create water penetration issues or falling hazards from joint failure between components. Applications include street lighting, parks, walkways, car parks, public areas, and housing estates. The Ozlite LED provides exceptional performance in beach front esplanades and marinas where previously the salty environment has created considerable issues with luminaires of different construction. Vandal prone areas can utilise the vandal resistant version of the Ozlite LED, with the aluminium body material thickness being increased from 3mm to 6mm, and the lens being protected by a 4.5mm thickness polycarbonate deflector shield. The Ozlite LED is Australian made, with its modular design and superior component selection offering considerable operation and maintenance savings over the extended life of the installation.
Standards Complies with:
AS/NZS1158.6:2004 AS/NZS1158.3.1:2005 AS/NZS60598.1:2003
Acrylic PMMA Lens IK04 Polycarbonate Deflector IK08 Aluminium Body 3mm IK08
N 1760
Luminaire body & Connection Chamber
IP 67
The Energy Efficient Range
Ozlite LED The energy efficient standard Ozlite LED enables the designer to create a stylish and pleasing environment to any park, walkway, shopping mall, car park, mariner, beach front esplanade, or housing estate. Available as a top entry or side entry luminaire. Side entry pictured.
Ozlite LED Alpha The Alpha model of the Ozlite LED provides all of the structural and performance benefits of the standard Ozlite LED, but with the inclusion of additional styling features to enhance the aesthetics of the installation. Available as a top entry or side entry luminaire. Top entry pictured.
Vandal Resistant Ozlite LED The vandal resistant Ozlite LED offers the same functional specification, but with an increased body thickness of 6mm aluminium and the inclusion of a specially designed 4.5mm thickness polycarbonate deflector shield protecting the lens. Available as a top entry or side entry luminaire. Top entry pictured.
Technical
Ordering Order the Ozlite LED as a description including the following -
Voltage
240V. 50Hz.
Wattage
40.7W
Flux
4000 Lumen >98Lm/W
Colour Temperature
4000K
Colour Rendering Index
>80 CRI
Style
Standard or Alpha
LED Module Life
>80% light output after 50,000hrs
Colour
Black, Green, White, Maroon are standard.
LED Driver
Top Entry
Nominate
Short circuit, over current, over temperature, over voltage protection. IP67
Side Entry
Nominate
P.E. Cell
With or without
Vandal Resistant
Nominate
Ozlite LED is available in various body colours
Mounting Mass
8.5—9.5kg
Top Entry Spigot Size
45mm
Side Entry Spigot Size
27mm—40mm
Dimensions
Vandal Resistant
Top Entry Luminaires
550mm High
Side Entry Luminaires
475mm High
All Ozlite LED Luminaires
570mm Wide
Vandal Resistant Model
Add 50mm to Height
Top Entry
Side Entry
Streetworx Pty Ltd is 100% Australian owned and operated. The Streetworx Ozlite LED is designed, engineered, tested and fully certified in Australia, to all applicable Australian Standards. The Ozlite and Ozlite LED, include technology protected by Designs, Patents and/or Copyright.
Ace Streetworx 191 Liverpool Rd Kilsyth, Victoria Australia 3137 T 1800 131 366 F (03) 9761 8035
[email protected] streetworx.com.au
Pub. IGOZLED0614NL